Magafor 888092H1000 Hard-X Carbide Multi-V Drill Bit, 120 Degree, 10 mm
- Material of the product is carbide. The product is manufactured in france. Over all length of the product is 275 inches.
Magafor 888090H0250 Hard-X Carbide Multi-V Drill Bit, 2.5 mm
- Over all length of the product is 15 inches. The product is manufactured in france. Material of the product is carbide.
Big Gator Tools BGT V-drill 2 Pack V-drillguides W/25 SAE (Standard) Hole Sizes 1/8″ – 1/2″
- Non-plated material with light oil coating to prevent rust. Special nickel alloyed steel heat treated for durability. Round stock hole alignment marks on one side. Centers the holes on pipes, dowels & outside corners. Made in usa, portable, pocket-sized,prevents drill bit wander.
Big Gator Tools SDGMINI MINI V-Drill Guide 21 Drill Sizes by BIG GATOR TOOLS
- Covers all tap drill sizes for tap sizes 10-32 down to 0-80. 21 drill sizes #10, 21, 25, 29, 30, 1/8, 33, 7/64, 36, 37, 38, 40, 3/32, 43, 45, 47, 5/64, 50, 1/16, 53, 3/64. 100% made in u. Side alignment marks allow accurate hole locating. The portable v-drill guide ensures straight and accurate hand drilled holes on flat surfaces, corners and round partsheat treated for durability. S. A.
Big Gator Tools V Tap and V Drill Guides – Complete tool set of 6 Guides
- V-groove along the bottom of the guides allows for perpendicular alignment on round parts or corners. Automatically squares up the tap or drill with the surface. 100% made in the usa eliminates most tap breakage due to improper alignment. Natural steel finish, non-plated, portable, pocket-sized lifetime manufacture warranty. Made from special nickel alloyed steel that is heat treated for durability.
1/8″ x 3″ long Relton Groo-V Tip Granite, Marble and Porcelain Multi-Purpose Drill Bit
- 2 mm) drilling depth 1-7/8 in (47. Shank diameter 3/8″ and larger have 3 flats on the shank to reduce the possibility of slipping in the chuck. • tile • marble • granite • porcelain • masonry • cast iron • hardened steel • designed for drilling marble, granite, porcelain tile, hard metal, plastic, wood, masonry percussion or rotary-only, the groo-v® tip bit makes holes in almost all materials engineered for drilling hard materials, these specialized ram tip bits have a serrated carbide tip, which penetrates faster, up to 50% faster than standard masonry bits point diameter 1/8 in (3 mm) shank diameter 1-8 in (3 mm) overall length 3 in (76. 62 mm) minimum order 1 each note a drill press, supported drill motor is recommended for drilling hard metal. .
Magafor 888090H0635 Hard-X Carbide Multi-V Drill Bit, 1/4″ Diameter
- Material of the product is carbide. Over all length of the product is 2375 inches. The product is manufactured in france.
Magafor 888090H0800 Hard-X Carbide Multi-V Drill Bit, 8.0 mm
- Material of the product is carbide. Over all length of the product is 2375 inches. The product is manufactured in france.
Magafor 888090H0793 Hard-X Carbide Multi-V Drill Bit, 5/16″ Diameter
- Material of the product is carbide. The product is manufactured in france. Over all length of the product is 2375 inches.
Magafor 888092H0500 Hard-X Carbide Multi-V Drill Bit, 120 Degree, 5.0 mm
- The product is manufactured in france. Material of the product is carbide. Over all length of the product is 2 inches.
Big Gator Tools SDGMINI MINI V-Drill Guide 21 Drill Sizes
- The portable v-drill guide ensures straight and accurate hand drilled holes on flat surfaces, corners and round parts. Heat treated for durability side alignment marks allow accurate hole locating. 100% made in usa. 21 drill sizes #10, 21, 25, 29, 30, 1/8, 33, 7/64, 36, 37, 38, 40, 3/32, 43, 45, 47, 5/64, 50, 1/16, 53, 3/64″. Covers all tap drill sizes for tap sizes 10-32 down to 0-80.
Big Gator Tools BGT V-drill V-drillguides W/25 SAE (Standard) Hole Sizes 1/8 – 1/2 by BIG GATOR TOOLS
- Made in usa, portable, pocket-sized,prevents drill bit wanderround stock hole alignment marks on one sidespecial nickel alloyed steel heat treated for durabilitynon-plated material with light oil coating to prevent rustcenters the holes on pipes, dowels & outside corners.
Magafor 888090H0160 Hard-X Carbide Multi-V Drill Bit, 1.6 mm
- The product is manufactured in france. Material of the product is carbide. Over all length of the product is 15 inches.
Magafor 888090H0500 Hard-X Carbide Multi-V Drill Bit, 5.0 mm
- The product is manufactured in france. Material of the product is carbide. Over all length of the product is 2 inches.
Magafor 888090H0600 Hard-X Carbide Multi-V Drill Bit, 6.0 mm
- Material of the product is carbide. Over all length of the product is 2375 inches. The product is manufactured in france.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
