C.R. LAURENCE PH20ADU CRL Dark Bronze Top Door Patch Fitting with 1NT303 Insert
- R. . It fits in the upper corner of the gate”s glass panel, and requires a hole and cut-out in the glass. Laurence ph20adu crl dark bronze top door patch fitting with 1nt303 insert. C. Crl top gate patch fittings are used with all three of our gate and door pivots. Available in brushed stainless steel finish, it comes complete with instructions and a glass cut-out template.
Black Bronze EUR Series Top or Bottom Patch Fitting – Less Insert
- Maximum height 120″ (3050mm)maximum weight 176 lbs (80kg)maximum width 43″ (1100mm)if the door exceeds any of these limitations, full door rails should be used. Glass fabrication required one corner notchincludeshigh density cast bodycover plates (finish of your choice)gaskets for 3/8 or 1/2 inch (10 or 12 millimeter)template and instructionsimportant notesthe following guidelines are the be used when making a door using this hardware. Color black bronzefor use with eur series top and bottom insertshigh density cast body with lock mechanismgaskets for use with 3/8″ or 1/2″ glassthis crl eur series patch fitting (less fitting) will allow you to use the same fitting for either top or bottom by simply installing the appropriate insert.
CRL Brushed Stainless Patch Fitting Replacement Cover Plate for PH10-11-20-21 – 1NT101BS
- These crl replacement cover plates for commercial patch fittings are intended as replacements for damaged cover plates on existing installations that have used ph10, ph11, ph20 and ph21 fittings. These plates also allow the finish to be changed when remodeling without removing the main patch body. .
Brushed Stainless Top Door Patch Fitting with 1NT303 Insert
- Glass fabrication requiredone 3/4″ (19 mm) diameterhole and corner notchcomes withtemplate and instructionsimportant notesthese fittings are not for use with laminated glass. Gaskets are supplied that allow this patch fitting to be used with either 3/8″ or 1/2″ (10 or 12 mm) glass. Finished covers are available in four standard finishes. The following guidelines are to be used when making a door using this hardwaremaximum height 108″ (2744 mm)maximum weight 176 lbs. Color brushed stainless2-9/16″ (65 mm) pivot setbackhigh density cast bodyfor 3/8″ or 1/2″ (10 or 12 mm) glassthe crl top door patch fitting includes the 1nt303 insert for use with our crl9040wbp top walking beam pivot, 1nt401 surface mount top pivot, 1nt405 threaded top pivot, or other 19/32″ (15 mm) diameter type pivots. (80 kg)maximum width 43″ (1110 mm)if the door exceeds any of these limitations, full door rails should be used.
CRL Aluminum Finish Ceiling Mounted Support Fin Bracket Patch Fitting
- Capacity 10-12mm thick glass. Finish chrome plated. Use the excellent stainless steel. Prefectly fit with glass door to create a spacious and bright modern life and work environment. For 3/8″ or 1/2″ (10 or 12 mm) glass.
Brass PTH Series Bottom Door Patch Fitting
- Glass fabrication required two 13/16″ (20 mm) diameter holes and one notch (template included). Color brassa complete selection for single or double doors, transoms, and sidelites fittingsfor 3/8″ or 1/2″ (10 or 12 mm) glassavailable in two finishescrl pth series bottom door patch fitting includes high density cast body, floor closer type insert, finished cover plate, and gaskets for 3/8″ and 1/2″ (10 and 12 mm) glass. 2 mm) flat tapered spindles. This fitting is commonly used with either crl8300, crl8400 or crl8500 series floor closers,1nt402 bottom free swinging pivot, or 1nt406 adjustable free swing bottom pivot and j990 series door closers 7/8″ (22.
Polished Stainless PTH Series Top Door Patch Fitting
- Color polished stainlessa complete selection for single or double doors, transoms, and sidelites fittingsfor 3/8″ or 1/2″ (10 or 12 mm) glassavailable in two finishesthis crl pth series top door patch fitting includes a high density cast body, pivot socket, finished cover plate, and gaskets for 3/8″ and 1/2″ (10 and 12 mm) glass. This fitting is commonly used with either a pth23 top transom pivot, crl9040wbp walking beam pivot, 1nt401 top free swinging pivot, or 1nt405 header mount top pivot. Glass fabrication requiredtwo 13/16″ (20 mm) diameter holes and one notch (template included)for use withpth23 top transom pivot crl9040wbp walking beam pivot 1nt401 top free-swinging pivot 1nt405 header mount top pivot.
NHN Model: PDC105 SSS – Hydraulic Self Closing Pivot Door Closer for Glass Door (Patch Fitting) (Non-hold open) No Digging Floor
- Supplied non handed the nhn pdc100 provides optimum efficiency with quick and easy installation. Simple final adjustments. Ambient temperature -4f + 122f degrees. Finishes available as standard are satin and polished stainless steel. Non hold open model suitable for a glass door 3/8-9/16inch thick, 30-493inch wide and a maximum weight of 220lbs.
NHN Model: PDC100-S SSS – Hydraulic Self Closing Pivot Door Closer for Glass Door (Patch Fitting) (hold open 90degree) No Digging Floor
- Supplied non handed the nhn pdc100 provides optimum efficiency with quick and easy installation. Hold open model suitable for a glass door 5/16-1/2inch thick, 30-393inch wide and a maximum weight of 220lbs. Finishes available as standard are satin and polished stainless steel. Ambient temperature -4f + 122f. Simple final adjustments.
Polished Stainless Top Door Patch Fitting with Pivot Insert
- It fits in the upper corner of the gate’s glass panel, and requires a hole and cut-out in the glass. Glass fabrication requiredone 3/4″ (19 mm) diameter hole and corner notchcomes withtemplate and instructions. The following guidelines are to be used when making a door using this hardwaremaximum height 102″ (2591 mm)maximum weight 194 lbs. Available in brushed and polished stainless steel finishes. (88 kg)maximum width 42″ (1092 mm)if the door exceeds any of these limitations, full door rails should be used. Color polished stainlessfor 3/4″ (19 mm) glass304 alloy stainless steel covers2-3/4″ (70 mm) pivot setbackcrl top gate patch fittings are used with all three of our gate and door pivots.
Brass Patch Fitting Replacement Cover Plate for PH34
- Includes 1 set of two cover plates. These plates also allow the finish to be changed when remodeling without removing the main patch body. Color brassfor ph34 wall mounted transom patch fittingsthese crl replacement cover plates for commercial patch fittings are intended as replacements for damaged cover plates on existing installations that used ph34 wall mounted transom patch fittings.
CRL Dark Bronze Adjustable European Top Door Patch Fitting by CR Laurence
- Color dark bronzeadjustable pivot insert allows three degrees movement for proper door alignment2-9/16″ (65 mm) pivot setbackfor 3/8″ or 1/2″ (10 or 12 mm) glassthe crl adjustable top door patch fitting includes an adjustable pivot insert that allows for 3 degrees of movement for proper alignment of the door to the jamb when in the closed position. The following guidelines are to be used when making a door using this hardwaremaximum height 102″ (2591 mm)maximum weight 194 lbs. Finished covers are available in five standard finishes. Glass fabrication requiredone 3/4″ (19 mm) diameterhole and corner notchcomes withtemplate and instructionsimportant notesthese fittings are not for use with laminated glass. Gaskets are supplied that allow this patch fitting to be used with either 3/8″ or 1/2″ (10 or 12 mm) glass. For use with our crl9970 overhead concealed door closer. (88 kg)maximum width 42″ (1092 mm)if the door exceeds any of these limitations, full door rails should be used.
CRL Aluminum Finish Patch Fitting Replacement Cover for PH34
- These plates also allow the finish to be changed when remodeling without removing the main patch body. These crl replacement cover plates for commercial patch fittings are intended as replacements for damaged cover plates on existing installations that used ph34 wall mounted transom patch fittings. .
Brass Top Door Patch Fitting With 1NT303 Insert
- . (80 kg)maximum width 43″ (1110 mm)if the door exceeds any of these limitations, full door rails should be used. Gaskets are supplied that allow this patch fitting to be used with either 3/8″ or 1/2″ (10 or 12 mm) glass. The following guidelines are to be used when making a door using this hardwaremaximum height 108″ (2744 mm)maximum weight 176 lbs. Finished covers are available in four standard finishes. Color brass2-9/16″ (65 mm) pivot setbackhigh density cast bodyfor 3/8″ or 1/2″ (10 or 12 mm) glassthe crl top door patch fitting includes the 1nt303 insert for use with our crl9040wbp top walking beam pivot, 1nt401 surface mount top pivot, 1nt405 threaded top pivot, or other 19/32″ (15 mm) diameter type pivots. Glass fabrication requiredone 3/4″ (19 mm) diameterhole and corner notchcomes withtemplate and instructionsimportant notesthese fittings are not for use with laminated glass.
NHN Model:KPF-2P Top Patch Fitting for Glass Door
- Same size of pdc100. Top patch fitting for glass door.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
