16 Best and Coolest Concrete Anchors

 

Hammer Drive Concrete Anchor w/Stainless Nail 1/4″ x 2″ Qty: 50 - Hammer drive concrete anchor w/stainless nail 1/4″ x 2″ qty 50.

 

ITW Brands 24220 25PK1/4×1-3/4 Concrete Anchor - . Tapcon, 25 pack, 1/4″ x 1-3/4″ hex washer head concrete anchors.

 

FallTech 7440 Temporary Wedge Concrete Anchor – Reusable 3/4″ Multi-Directional Temporary Anchor for Existing Cured Concrete, Rated to 5,000 lb, Natural - And we take it seriously. We know that the stakes are high. Whether a temporary solution is needed for pre-cast or pour in place concrete, or if a permanent yet removable anchorage is needed, falltech concrete anchors provide expected solutions. And, when it comes to worker safety, there are no second chances. Falltech concrete anchors have been designed for applications where traditional anchors fall short. We train and staff fall protection experts that understand problems, not just fall protection products, and can identify fall safety solutions that save lives. Because they do. That is why. Fall protection is all we do. Advanced technical design and rigorous quality testing are the backbone of falltech’s manufacturing process. At falltech, we engineer innovative fall safety solutions as though lives depend on it.

 

TW Brands Tapcon 24397 1/4×4 Concrete Anchor-25Pack - 75 pack, 1/4″ x 4″, tapcon phillips flat head concrete anchors. .

 

3M DBI-SALA 2104560 Concrete Anchor, D-Ring Anchor for 11/16″ Hole with Swiveling D-Ring, Silver/Red - Safe hook-up indicator notifies the user the anchor has been installed properly. Installation is simple and efficient, taking just seconds utilizing standard concrete tools. Weight capacity 420-pounds. Rugged design for harsh environments with no moving or fragile parts to foul-up. Makes installing into concrete simple, fast and easy for added worker satisfaction and productivity. Concrete d-ring anchor for 11/16 in, 18 mm or 3/4 in hole with swiveling d-ring. For flexibility, install into 11/16-inch, 18mm or 3⁄4-inch holes, only standard drill bits needed. Re-usable d-ring assembly, just install a new bolt and it’s ready for use again. The anchor can be used in mulitple orientations for added jobsite versatility and flexibility. A built-in d-ring provides a compatible connection for your fall protection system and swivels keeping your connecting component in-line at all times.

 

ITW Brands 24193 5/16″ x 3″, Steel Hex Washer Head Large Diameter Tapcon Concrete Anchors - 5/16″ x 3″, steel hex washer head large diameter tapcon concrete anchors. .

 

ITW Brands 11413 3/8×3 Concrete Hex Anchor - 3/8″ x 3″, steel hex washer head large diameter tapcon concrete anchor. .

 

ITW Brands 24115 8PK1/4×1-1/4 Concrete Anchor - Tapcon, 8 pack, 1/4″ x 1-1/4″ hex washer head concrete anchors. .

 

3/8 x 2 1/2 Titen HD Concrete Anchor Zinc Plated (50) - The titen hd® anchor is a patented, high-strength screw anchor for concrete and masonry. The high strength, easy to install titen hd® anchor has been tested and shown to provide outstanding performance in cracked and uncracked concrete under both static and seismic loading conditions. The self-undercutting, non-expansion characteristics of the titen hd® anchor make it ideal for structural applications, even at reduced edge distances and spacings. . It is designed for optimum performance in both cracked and uncracked concrete a requirement that the 2006 ibc places on post-installed anchors. Recommended for permanent dry, interior, non-corrosive environments or temporary outdoor applications.

 

ITW Brands 24292 15 Pack, 5/16″ x 2″, Steel, Hex Washer Head, Large Diameter Tapcon Concrete Anchor - . 5/16″x2″, steel, hex washer head, large diameter tapcon concrete anchor.

 

Vestil AS-125-4PK Concrete Anchor Four Bolt Kit, 1/2″ Diameter x 5″ Length - Vestil concrete anchor four bolt kit includes concrete anchor, bolt, washer and nut. Zinc plated steel provides a strong anchor point. Measures 1/2-inches diameter by 5-1/2-inches length. Anchor design makes installation quicker and easier. Sleeve length provides added security. Anchor construction hold units in place in the most demanding environments.

 

Miller Grip Concrete Anchor Point - Designed for single-user fall protection applications, miller’s grip anchor establishes a safe 5000 lb anchor point—simply drill a 3/4″ hole in cured concrete and insert the anchor. A variety of connecting devices, including a shock-absorbing lanyard or self-retracting lifeline, can be attached to the miller grip, and it’s reusable. .

 

Vestil AS-383 Concrete Anchor Single Bolt, 3/8″ Diameter x 3″ Length - Sleeve length provides added security. Measures 3/8-inches diameter by 3-inches length. Vestil concrete anchor single bolt kit includes concrete anchor, bolt, washer and nut. Anchor construction hold units in place in the most demanding environments. Zinc plated steel provides a strong anchor point. Anchor design makes installation quicker and easier.

 

Guardian Fall Protection 10715 4-Foot Loop and D-Ring End Concrete Anchor Strap with Protective Sheathing - They can be installed as permanent anchors during building construction to protruded through poured concrete, as well as in temporary applications such as wood framing, rebar work, and pipe racking—though always ensure that the selected attachment point can withstand loads of up to 5,000 pounds. . These anchors are sheathed in heavy duty nylon webbing to protect their inner core from any abrasion and wear, and are some of the most cost effective anchors around. The guardian fall protection line of concrete anchor straps is one of the most extensive available in the market. Guardian will also custom design and fabricate concrete anchor straps specific to any customer need. Concrete anchor straps are intended for one impact only, and must be cut off if exposed to forces of fall arrest.

 

ITW Brands 24293 15 Pack, 5/16″ x 3″, Steel, Hex Washer Head, Large Diameter Tapcon Concrete Anchor - 5/16″x3″, steel, hex washer head, large diameter tapcon concrete anchor. .

 

Concrete Wedge Anchors Zinc Alloy – 3/8-16 X 3-1/2 – Qty 250 - These anchors can be used for some of the following concrete applications shelving, railing, duct work, signs, electric pipe, light fixtures, escalators, etc. Wedge anchors, concrete anchors, or masonry anchors are designed to be installed into solid concrete. Wedge anchors can be used to fasten objects to concrete. Wedge anchors cannot be used on brick or block.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.