16 Best and Coolest Fitting Stainless Steels

 

12 Female x 12 Male Nipple Bush Adapter Bushing Pipe Fittings NPT Stainless Steel 304 #ad

1/2″ Female x 1/2″ Male Nipple Bush Adapter, Bushing Pipe Fittings, NPT Stainless Steel 304

1/2″ Female x 1/2″ Male Nipple Bush Adapter, Bushing Pipe Fittings, NPT Stainless Steel 304 #ad - Pipe nipple for custom-made parts, pipes fittings connector, such as used for water pipe, oil pipe, air pipe and so on. Stainless steel 304 for resistance to corrosion and high temperatures. 100% brand new and high quality. Shapefemale to male,connectionnpt-npt. Maximum operating pressure rating of 250 psi at 70 degrees f ambient temperature.

 

Dixon DCP17S Stainless Steel 303 Air Chief Industrial Interchange Quick-Connect Hose Fitting Plug 12 Coupling x 12 NPT Male #ad

Dixon DCP17S Stainless Steel 303 Air Chief Industrial Interchange Quick-Connect Hose Fitting, Plug, 1/2″ Coupling x 1/2″ NPT Male

Dixon DCP17S Stainless Steel 303 Air Chief Industrial Interchange Quick-Connect Hose Fitting, Plug, 1/2″ Coupling x 1/2″ NPT Male #ad - Air chief industrial interchange quick connect plug for connecting directly to a hose with a male npt end to connect with a female npt threaded connection. Interchanges with mil-c-4109f/a-a-59439 specifications for quick-disconnect couplings for hoses and portable pneumatic tools, but not water or fluids, at maximum working pressures up to 232 psi (16 bar). Stainless steel 303 for better machining characteristics than stainless steel 316. Air chief industrial interchange quick connect plug with a male npt threaded end. Valveless construction allows flow when disconnected.

 

SuperWhole 12x38 Male Hex Nipple Threaded Reducer Pipe Fitting Stainless Steel 304 NPT #ad

SuperWhole 1/2″x3/8″ Male Hex Nipple Threaded Reducer Pipe Fitting Stainless Steel 304 NPT

SuperWhole 1/2″x3/8″ Male Hex Nipple Threaded Reducer Pipe Fitting Stainless Steel 304 NPT #ad - Shape threaded reducer (male x male) connectionnpt-npt material 304 stainless steel measurement 1/2″x3/8″ other size is available too,please check it in our store package include 1 piece x 1/2″x3/8″ male hex nipple threaded reducer pipe fitting stainless steel 304 npt.

 

Flextron FTGC-YC34-18P 18 Flexible Epoxy Coated Gas Line Connector with 1 Outer Diameter and 34 FIP x 34 MIP Fittings Stainless Steel #ad

Flextron FTGC-YC34-18P 18″ Flexible Epoxy Coated Gas Line Connector with 1″ Outer Diameter and 3/4″ FIP x 3/4″ MIP Fittings, Stainless Steel

Flextron FTGC-YC34-18P 18″ Flexible Epoxy Coated Gas Line Connector with 1″ Outer Diameter and 3/4″ FIP x 3/4″ MIP Fittings, Stainless Steel #ad - The coating gives it extra protection against corrosion when it comes in contact with chemicals that are typically found in households. The part is certified by commonwealth of massachusetts, the city of new york and by upc and csa for meeting the amse a112. It has an outer diameter of 1″ and an inner diameter of 3/4″ and is made of stainless steel coated with a yellow epoxy coating along the entire length of the connector. It can also endure up to 30 bends without leaks in water at a depth of maximum 2 inches and withstands 15 twists of 90 degrees, without showing signs of corrosion. 6 and ansi z21. The connector can handle external temperatures of 800 f. On the ends of this 18″ long connecter are a 3/4″ fip and a 3/4″ mip fitting, made of zinc-plated stainless steel type s45c. Each connector is 100% tested on leaks before it leaves the factory. Please consult the product information for the flow capacity for this part, for natural gas. 24, z21. 18. This is a flextron gas connector from their yc34 series of connectors, which is designed for indoor and is designed as part of a tank less water heater or -valve kit. 75 gas appliances and manufactured homes standards. 5 psi. The design has been tested on strength and it can withstand an internal hydrostatic pressure of 250 psi or 17 mpa without bursting or showing signs of leaks. 69 and z21. Its flared end fittings result in a metal to metal seal, which is tested to be leak free within a tighten torque of 1040 inch-pounds. The connector is rated for use in the temperature range of -40 f to 150 f and it is certified by csa for use up to a pressure of 0.

 

Flextron FTGC-YC12-18M 18 Flexible Yellow Epoxy Coated Gas Line Connector with 58 Outer Diameter and 12 FIP x 34 MIP Fittings Stainless Steel #ad

Flextron FTGC-YC12-18M 18″ Flexible Yellow Epoxy Coated Gas Line Connector with 5/8″ Outer Diameter and 1/2″ FIP x 3/4″ MIP Fittings, Stainless Steel

Flextron FTGC-YC12-18M 18″ Flexible Yellow Epoxy Coated Gas Line Connector with 5/8″ Outer Diameter and 1/2″ FIP x 3/4″ MIP Fittings, Stainless Steel #ad - The part is certified by commonwealth of massachusetts, the city of new york and by upc and csa for meeting the amse a112. 75 gas appliances and manufactured homes standards. Each connector is 100% tested on leaks before it leaves the factory. The coating gives it extra protection against corrosion when it comes in contact with chemicals that are typically found in households. The design has been tested on strength and it can withstand an internal hydrostatic pressure of 250 psi or 17 mpa without bursting or showing signs of leaks. On the ends of this 18″ long connecter are a 1/2″ fip and a 3/4″ mip fitting, made of zinc-plated stainless steel type s45c. Please consult the product information for the flow capacity for this part, for natural gas. The connector is rated for use in the temperature range of -40 f to 150 f and it is certified by csa for use up to a pressure of 0. 6 and ansi z21. It can also endure up to 30 bends without leaks in water at a depth of maximum 2 inches and withstands 15 twists of 90 degrees, without showing signs of corrosion. This is a flextron gas connector from their yc12 series of connectors, which is designed for indoor and outdoor use with gas ranges and furnaces. It has an outer diameter of 5/8″ and an inner diameter of 1/2″ and is made of stainless steel coated with a yellow epoxy coating along the entire length of the connector. 24, z21. The connector can handle external temperatures of 800 f. 5 psi. 18. Its flared end fittings result in a metal to metal seal, which is tested to be leak free within a tighten torque of 1040 inch-pounds. 69 and z21.

 

Flextron FTGC-YC12-24C 24 Flexible Yellow Epoxy Coated Gas Line Connector with 58 Outer Diameter and 12 FIP x 12 MIP Fittings Stainless Steel #ad

Flextron FTGC-YC12-24C 24″ Flexible Yellow Epoxy Coated Gas Line Connector with 5/8″ Outer Diameter and 1/2″ FIP x 1/2″ MIP Fittings, Stainless Steel

Flextron FTGC-YC12-24C 24″ Flexible Yellow Epoxy Coated Gas Line Connector with 5/8″ Outer Diameter and 1/2″ FIP x 1/2″ MIP Fittings, Stainless Steel #ad - The connector is rated for use in the temperature range of -40 f to 150 f and it is certified by csa for use up to a pressure of 0. 5 psi. 24, z21. Please consult the product information for the flow capacity for this part, for natural gas. The connector can handle external temperatures of 800 f. On the ends of this 24″ long connecter are a 1/2″ fip and a 1/2″ mip fitting, made of zinc-plated stainless steel type s45c. Its flared end fittings result in a metal to metal seal, which is tested to be leak free within a tighten torque of 1040 inch-pounds. The coating gives it extra protection against corrosion when it comes in contact with chemicals that are typically found in households. 6 and ansi z21. It has an outer diameter of 5/8″ and an inner diameter of 1/2″ and is made of stainless steel coated with a yellow epoxy coating along the entire length of the connector. 75 gas appliances and manufactured homes standards. This is a flextron gas connector from their yc12 series of connectors, which is designed for indoor and outdoor use with gas ranges and furnaces. 69 and z21. The design has been tested on strength and it can withstand an internal hydrostatic pressure of 250 psi or 17 mpa without bursting or showing signs of leaks. It can also endure up to 30 bends without leaks in water at a depth of maximum 2 inches and withstands 15 twists of 90 degrees, without showing signs of corrosion. 18. Each connector is 100% tested on leaks before it leaves the factory. The part is certified by commonwealth of massachusetts, the city of new york and by upc and csa for meeting the amse a112.

 

Flextron FTGC-YC12-60M 60 Flexible Yellow Epoxy Coated Gas Line Connector with 58 Outer Diameter and 12 FIP x 34 MIP Fittings Stainless Steel #ad

Flextron FTGC-YC12-60M 60″ Flexible Yellow Epoxy Coated Gas Line Connector with 5/8″ Outer Diameter and 1/2″ FIP x 3/4″ MIP Fittings, Stainless Steel

Flextron FTGC-YC12-60M 60″ Flexible Yellow Epoxy Coated Gas Line Connector with 5/8″ Outer Diameter and 1/2″ FIP x 3/4″ MIP Fittings, Stainless Steel #ad - The part is certified by commonwealth of massachusetts, the city of new york and by upc and csa for meeting the amse a112. 75 gas appliances and manufactured homes standards. This is a flextron gas connector from their yc12 series of connectors, which is designed for indoor and outdoor use with gas ranges and furnaces. The connector is rated for use in the temperature range of -40 f to 150 f and it is certified by csa for use up to a pressure of 0. It can also endure up to 30 bends without leaks in water at a depth of maximum 2 inches and withstands 15 twists of 90 degrees, without showing signs of corrosion. 24, z21. The coating gives it extra protection against corrosion when it comes in contact with chemicals that are typically found in households. 18. 6 and ansi z21. Please consult the product information for the flow capacity for this part, for natural gas. On the ends of this 60″ long connecter are a 1/2″ fip and a 3/4″ mip fitting, made of zinc-plated stainless steel type s45c. 69 and z21. 5 psi. Each connector is 100% tested on leaks before it leaves the factory. Its flared end fittings result in a metal to metal seal, which is tested to be leak free within a tighten torque of 1040 inch-pounds. The connector can handle external temperatures of 800 f. It has an outer diameter of 5/8″ and an inner diameter of 1/2″ and is made of stainless steel coated with a yellow epoxy coating along the entire length of the connector. The design has been tested on strength and it can withstand an internal hydrostatic pressure of 250 psi or 17 mpa without bursting or showing signs of leaks.

 

Flextron FTGC-SS38-72 70 Gas Line Connector with 12 Outer Diameter and Nut Fittings Stainless Steel #ad

Flextron FTGC-SS38-72 70″ Gas Line Connector with 1/2″ Outer Diameter and Nut Fittings, Stainless Steel

Flextron FTGC-SS38-72 70″ Gas Line Connector with 1/2″ Outer Diameter and Nut Fittings, Stainless Steel #ad - 24, z21. This is a flextron gas connector from their ss38 series of connectors, which is designed for indoor and outdoor use with gas dryers and water heaters. 69 and z21. 18. It can also endure up to 30 bends without leaks in water at a depth of maximum 2 inches and withstands 15 twists of 90 degrees, without showing signs of corrosion. The part meets the amse a112. On the ends of this 70″ long connecter are nut fittings. The design has been tested on strength and it can withstand an internal hydrostatic pressure of 250 psi or 17 mpa without bursting or showing signs of leaks. Each connector is 100% tested on leaks before it leaves the factory. The connector is rated for use in the temperature range of -40 f to 150 f and can be used up to a pressure of 0. 5 psi. Please consult the product information for the flow capacity for this part, for natural gas. The connector can handle external temperatures of 800 f. It has an outer diameter of 1/2″ and an inner diameter of 3/8″ and is made of uncoated stainless steel. 6 and ansi z21. 75 gas appliances and manufactured homes standards.

 

Everflow Supplies SSCPM200-NL 2 Lead Free Transition Fitting with a Stainless Steel Male Threaded and with a CPVC Connection #ad

Everflow Supplies SSCPM200-NL 2″ Lead Free Transition Fitting with a Stainless Steel Male Threaded and with a CPVC Connection

Everflow Supplies SSCPM200-NL 2″ Lead Free Transition Fitting with a Stainless Steel Male Threaded and with a CPVC Connection #ad - . This is an ever flow supplies transition fitting for connecting a cpvc pipe and a pipe with threaded ends. In particular, this fitting has on one end a 2 inch male threaded connect, which is made of stainless steel, and on the other end a 2 inch cpvc connect, in which the pipe can be welded with cpvc cement. Moreover, being approved by upc, this is a lead free product, which makes it useable in potable water applications.

 

SuperWhole 1-12x1 Male Hex Nipple Threaded Reducer Pipe Fitting Stainless Steel 304 NPT #ad

SuperWhole 1-1/2″x1″ Male Hex Nipple Threaded Reducer Pipe Fitting Stainless Steel 304 NPT

SuperWhole 1-1/2″x1″ Male Hex Nipple Threaded Reducer Pipe Fitting Stainless Steel 304 NPT #ad - Shape threaded reducer (male x male) connectionnpt-npt material 304 stainless steel measurement 1-1/2″x1″ other size is available too,please check it in our store package include 1 piece x 1-1/2″x1″ male hex nipple threaded reducer pipe fitting stainless steel 304 npt.

 

SuperWhole 1-14x1Female Nipple Threaded Reducer Pipe Fitting Stainless Steel 304 NPT #ad

SuperWhole 1-1/4″x1″Female Nipple Threaded Reducer Pipe Fitting Stainless Steel 304 NPT

SuperWhole 1-1/4″x1″Female Nipple Threaded Reducer Pipe Fitting Stainless Steel 304 NPT #ad - Shape threaded reducer (female x female ) connectionnpt-npt material 304 stainless steel measurement 1-1/4″x1″ other size is available too,please check it in our store package include 1 piece x 1-1/4″x1″female nipple threaded reducer pipe fitting stainless steel 304 npt.

 

SuperWhole 1-14x1 Male Hex Nipple Threaded Reducer Pipe Fitting Stainless Steel 304 NPT #ad

SuperWhole 1-1/4″x1″ Male Hex Nipple Threaded Reducer Pipe Fitting Stainless Steel 304 NPT

SuperWhole 1-1/4″x1″ Male Hex Nipple Threaded Reducer Pipe Fitting Stainless Steel 304 NPT #ad - Shape threaded reducer (male x male) connectionnpt-npt material 304 stainless steel measurement 1-1/4″x1″ other size is available too,please check it in our store package include 1 piece x 1-1/4″x1″ male hex nipple threaded reducer pipe fitting stainless steel 304 npt.

 

SuperWhole 38x14Male Hex Nipple Threaded Reducer Pipe Fitting Stainless Steel 304 NPT #ad

SuperWhole 3/8″x1/4″Male Hex Nipple Threaded Reducer Pipe Fitting Stainless Steel 304 NPT

SuperWhole 3/8″x1/4″Male Hex Nipple Threaded Reducer Pipe Fitting Stainless Steel 304 NPT #ad - Shape threaded reducer (male x male) connectionnpt-npt material 304 stainless steel measurement 3/8″x1/4″ other size is available too,please check it in our store package include 1 piece x 3/8″x1/4″male hex nipple threaded reducer pipe fitting stainless steel 304 npt.

 

Flextron FTGC-SS12-60N 60 Flexible Gas Line Connector with 58 Outer Diameter and 34 x 34 MIP Fittings Stainless Steel #ad

Flextron FTGC-SS12-60N 60″ Flexible Gas Line Connector with 5/8″ Outer Diameter and 3/4″ x 3/4″ MIP Fittings, Stainless Steel

Flextron FTGC-SS12-60N 60″ Flexible Gas Line Connector with 5/8″ Outer Diameter and 3/4″ x 3/4″ MIP Fittings, Stainless Steel #ad - This is a flextron gas connector from their ss12 series of connectors, which is designed for indoor and outdoor use with gas ranges and furnaces. 5 psi. It has an outer diameter of 5/8″ and an inner diameter of 1/2″ and is made of uncoated stainless steel. 6 and ansi z21. 69 and z21. Each connector is 100% tested on leaks before it leaves the factory. The connector can handle external temperatures of 800 f. The connector is rated for use in the temperature range of -40 f to 150 f and it is certified by csa for use up to a pressure of 0. 75 gas appliances and manufactured homes standards. 18. On the ends of this 60″ long connecter are two 3/4″ mip fittings, made of zinc-plated stainless steel type s45c. Its flared end fittings result in a metal to metal seal, which is tested to be leak free within a tighten torque of 1040 inch-pounds. It can also endure up to 30 bends without leaks in water at a depth of maximum 2 inches and withstands 15 twists of 90 degrees, without showing signs of corrosion. The design has been tested on strength and it can withstand an internal hydrostatic pressure of 250 psi or 17 mpa without bursting or showing signs of leaks. 24, z21. Please consult the product information for the flow capacity for this part, for natural gas. The part is certified by commonwealth of massachusetts, the city of new york and by upc and csa for meeting the amse a112.

 

SuperWhole 12x38Female Nipple Threaded Reducer Pipe Fitting Stainless Steel 304 NPT #ad

SuperWhole 1/2″x3/8″Female Nipple Threaded Reducer Pipe Fitting Stainless Steel 304 NPT

SuperWhole 1/2″x3/8″Female Nipple Threaded Reducer Pipe Fitting Stainless Steel 304 NPT #ad - Shape threaded reducer (female x female ) connectionnpt-npt material 304 stainless steel measurement 1/2″x3/8″ other size is available too,please check it in our store package include 1 piece x 1/2″x3/8″female nipple threaded reducer pipe fitting stainless steel 304 npt.

 

SuperWhole 34X12X34 Female Tee Threaded Reducer Pipe Fitting Stainless Steel 304 NPT #ad

SuperWhole 3/4″X1/2″X3/4″ Female Tee Threaded Reducer Pipe Fitting Stainless Steel 304 NPT

SuperWhole 3/4″X1/2″X3/4″ Female Tee Threaded Reducer Pipe Fitting Stainless Steel 304 NPT #ad - Package include1 piece x 3/4″x1/2″x3/4″ female tee threaded reducer pipe fitting stainless steel 304 npt. Shape tee threaded reducer (female x female x female ). Other size is available too,please check it in our store. Material 304 stainless steel. Connectionnpt-npt-nptmeasurement 3/4″x1/2″x3/4″.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.