Starrett 93F T-Handle Tap Wrench, 1/4-1/2″ Tap Size, 3/16″ – 5/16″ Square Shank Diameter, 13″ Body Length
- The body is centered, enabling the worker to use it on lathe centers or on an upright drilling machine to start the tap straight. Wrench have a sliding handle that is frictionally held, the handle to be removed entirely or positioned so that leverage can be applied when working in close quarters. Starrett no 93 t-handle tap wrench is for holding taps, drills, reamers and other small tools to be turned by hand, it is properly heat treated to withstand ordinary shop use. It is identical in construction. The jaws conform to the tool being held, making it rigid and less apt to loosen.
QA-1 Quick Change Tap Adapter/Collet Size 1 (Tap size 5/16″)
- When paired with quick change holders, these greatly reduce change-over time. Equivalent to collis # 78916 us shop tools # bz00-31p command # xtc1-0312 techniks # 19/11-4079. The qa-1 is a rigid (no clutch) quick change positive drive tap adaptor that is ideal for mass production tapping applications.
QA-1 Quick Change Tap Adaptor Size 1 (Tap size 8 or 5/32″)
- When paired with quick change holders, these greatly reduce change-over time. The qa-1 is a rigid (no clutch) quick change positive drive tap adaptor that is ideal for mass production tapping applications. .
Morris Products 13396 Bi-Metal Hole Saw, 4-1/8″ Saw Diameter, Pipe Tap Size, 3-1/2″ Pipe Entrance Size, Used with 13460-13470 Arbor Size
- Bi-metal hole saws combine the toughness & shock resistance of an alloy with the cutting ability of high speed steel. M42 bi-metal hole saw for use in most materials wood, plastic, aluminum, brass, cast iron, & stainless steel. Variable pitch design (4-6 teeth/inch) reduces labor & tool costs by cutting 45% faster & lasting longer than straight 6 pitch saws. Better chip clearance, less heat build-up, lower feed pressure & smooth cuts. Bi-metal hole saws, a great bi-metal hole saw for any situation.
Irwin Tools 21201- T-Handle Ratcheting Tap Wrench For Tap Sizes No. 0 to 1/4″ – Carded
- -ideal for hard-to-reach areas. 0 to 1/4″ (3mm to 6mm). 5 inches. -Knurled nut for tightening. Overall product weight -0. Overall width, side to side -3. 9 inches. Han21201 features -three position gear box for quick, efficient ratcheting action. -For taps no. 45 pounds. Dimensions overall height, top to bottom -0. 4 inches. Overall depth, front to back -5.
Irwin Tools 21202- T-Handle ratcheting Tap Wrench For Tap Sizes 1/4″ to 1/2″ – Carded
- Three position gear box for quick, efficient ratcheting action. Designed for use with taps, reamers, screw extractors and other tools with a square shank.
Morris Products 13356 Bi-Metal Hole Saw, 2″ Saw Diameter, Pipe Tap Size, 1-1/2″ Pipe Entrance Size, Used with 13460-13470 Arbor Size
- Bi-metal hole saws combine the toughness & shock resistance of an alloy with the cutting ability of high speed steel. M42 bi-metal hole saw for use in most materials wood, plastic, aluminum, brass, cast iron, & stainless steel. Variable pitch design (4-6 teeth/inch) reduces labor & tool costs by cutting 45% faster & lasting longer than straight 6 pitch saws. Better chip clearance, less heat build-up, lower feed pressure & smooth cuts. Bi-metal hole saws, a great bi-metal hole saw for any situation.
Huot Manufacturing Huot Tap and Drill Bit Index for NF Tap Sizes #6-40 to .sell#(its-raining-deals-2 ,ket20172311978546
- I’ll do your request, send_me_questions w/ item name for help -( huot manufacturing huot tap and drill bit index for nf tap sizes #6-40 to sell#(its-raining-deals-2 ,ket20172311978546. Hss. Metric. Gun tap. High speed steel.
Irwin Tools 21101- T-Handle Ratcheting Tap Wrench For Tap Sizes No. 0 to 1/4″ – Bulk
- Three position gear box for quick, efficient ratcheting action. Designed for use with taps, reamers, screw extractors and other tools with a square shank.
Huot Tap Index for NC Sizes #4-40 to 5/8″-11
- Organizer types include gauges, indexes (also called cases), dispenser cabinets, carts, towers, racks, and platforms. 5 x 3. The index accommodates tap sizes 4-40, 6-32, 8-32, 10-24, 10-32, 1/4″-20, 5/16″-18, 3/8″-16, 1/2″-13, and 5/8″-11. The labeled storage holes provide quick identification and organization. Huot manufactures cutting tool storage systems. Paul, mn, meets international organization for standardization (iso) standard 9001. The huot tap index holds up to 10 taps in national coarse (nc) sizes #4-40 to 5/8″-11 and is made in usa. 25 × 1 inches (h x w x d). The index is 4. The index is made of steel with an epoxy finish and has a snap-lock cover for durability and protection. )Cutting tool organizers provide storage, organization, and quick size identification for drill bits, taps, and reamers. The company, founded in 1926 and headquartered in st. Taps are not included. (H is height, the vertical distance from lowest to highest point w is width, the horizontal distance from left to right d is depth, the horizontal distance from front to back.
Huot Combination Three-Drawer Tap, Drill Bit, and Die Dispenser Cabinet for Metric Sizes
- Made of steel with an epoxy finish for durability and protection. Three-drawer cabinet holds multiple taps, drill bits, and dies in a variety of metric sizes. Label holders for identification. Made in usa. Unit can be stacked with other huot dispenser cabinets.
Morris Products 13376 Bi-Metal Hole Saw, 2-7/8″ Saw Diameter, Pipe Tap Size, Pipe Entrance Size, Used with 13460-13470 Arbor Size
- Bi-metal hole saws, a great bi-metal hole saw for any situation. Bi-metal hole saws combine the toughness & shock resistance of an alloy with the cutting ability of high speed steel. Better chip clearance, less heat build-up, lower feed pressure & smooth cuts. Variable pitch design (4-6 teeth/inch) reduces labor & tool costs by cutting 45% faster & lasting longer than straight 6 pitch saws. M42 bi-metal hole saw for use in most materials wood, plastic, aluminum, brass, cast iron, & stainless steel.
Chicago Latrobe GT18 High-Speed Steel Jobber Length Drill Bit and Spiral Point Tap Set with Metal Case, Uncoated (Bright) Finish, 18-piece, Wire Size, Letter, Inch, #6-32 to 1/2″-13 Tap Sizes
- Set contains 9 spiral point taps, including thread sizes 6-32 unc, 8-32 unc, 10-24 unc, 10-32 unf, 1/4″-20 unc, 5/16″-18 unc, 3/8″-16 unc, 7/16″-14 unc, and 1/2″-13 unc. Uncoated (bright) finish provides an untreated surface. 118-degree conventional point on the drill bit for a range of drilling applications. High-speed steel (hss) provides hardness for wear resistance. Set contains 9 jobber length drill bits, including wire gauge sizes #36, #29, #25, #21,and #7 letter sizes f and u and inch sizes 5/16″ and 27/64″.
Huot Tap and Drill Bit Index for Metric Tap Sizes 2.5 mm x 0.45 mm to 12 mm x 1.75 mm and Metric Drill Bit Sizes 2.05 mm to 10.2 mm
- Labeled storage holes for identification and organization. Meets iso 529 1975 standards. Made of steel with an epoxy finish and has a snap-lock cover for durability and protection. Made in usa. Index holds 18 taps and drill bits in metric tap sizes 25 mm x 045 mm to 12 mm x 175 mm and drill bit sizes 205 mm to 102 mm.
Starrett 93E T-Handle Tap Wrench, 7/32″ – 7/16″ Tap Size, 5/32″ – 1/4″ Square Shank Diameter, 10″ Body Length
- Starrett no 93 t-handle tap wrench is for holding taps, drills, reamers and other small tools to be turned by hand, it is properly heat treated to withstand ordinary shop use. The body is centered, enabling the worker to use it on lathe centers or on an upright drilling machine to start the tap straight. Wrench have a sliding handle that is frictionally held, the handle to be removed entirely or positioned so that leverage can be applied when working in close quarters. The jaws conform to the tool being held, making it rigid and less apt to loosen. It is identical in construction.
Big Gator Tools BGRSTIUNC100SNP 6-32-9/16 V-Tap Guide/STI (Standard UNF Size)
- Universal & portable screw thread insert (sti) v-tap guide provides perpendicular alignment of sti ground thread taps used for heli coil inserts on flat, round or square cornered materials. Heat treated nickel alloy steel provides durability and accuracy. Precision ground base provides perpendicular alignment of sti tap on flat materials. 9 guide holes cover 10 unified course thread (unc) ground thread sti tap sizes 6-32, 8-32, 10-24, 12-24, 1/4-20, 5/16-18, 3/8-16, 7/16-14, 1/2-13, 9/16-12.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
