Steel Pan Head Machine Screw, Black Zinc Plated, Meets ASME B18.6.3, #2 Phillips Drive, #10-24 Thread Size, 3″ Length, Fully Threaded, Import (Pack of 50)
- . They are available with a variety of head shapes, which determine how the screw interacts with the mating surface, and drive styles, which determine the type of driver required to install and remove the screw. Machine screws are threaded fasteners that are typically used with nuts or drilled and tapped (threaded) holes.
410 Stainless Steel Self-Drilling Screw, Plain Finish, Wafer Head, Phillips Drive, #3 Drill Point, #10-24 Thread Size, 1-1/2″ Length (Pack of 25)
- Wafer head has a flat top, a 70-degree cone-shaped bearing surface, and a small slope between the top and the bearing surface. 410 stainless steel has high strength and hardness ratings and resists corrosion in mild environments. Plain surface has no finish or coating. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening.
18-8 Stainless Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #10-24 Thread Size, 2″ Length, Fully Threaded, Imported (Pack of 25)
- Machine screws are threaded fasteners that are typically used with nuts or drilled and tapped (threaded) holes. . They are available with a variety of head shapes, which determine how the screw interacts with the mating surface, and drive styles, which determine the type of driver required to install and remove the screw.
Nylon 6/6 Machine Screw, Plain Finish, Black, Binding Head, Combination Phillips Slotted Drive, 1/2″ Length, #10-24 Threads (Pack of 100)
- The black nylon 6/6 machine screw has a binding head with a combination phillips slotted drive. The binding head is a slightly undercut, low-profile head with a round top and short vertical sides. Nylon 6/6 can either absorb or lose moisture, which may alter its dimensions and mechanical properties. The undercut feature binds wires beneath the head, making this head style a common choice for electrical applications. Machine screws are available with a variety of head shapes, which determine how the screw interacts with the mating surface, and drive styles, which determine the type of driver required to install and remove the screw. The material is a strong yet lightweight plastic and is nonconductive. Machine screws are threaded fasteners that are typically used with nuts or drilled and tapped (threaded) holes. Nylon 6/6 provides resistance to abrasion, corrosion, and many chemicals and solvents. The head is shorter and wider than a pan head, enabling use in applications that would normally require a washer with the screw. The combination phillips slotted drive accepts both phillips and standard slotted drivers and is designed to allow the driver to slip out of the head when the screw has been tightened enough, helping to prevent over-tightening and damage to the thread or fastener.
Unbrako 1100579 Alloy Steel Socket Cap Screw, Black Oxide Finish, Low-Head Socket Cap Head, Hex Socket Drive, Right Hand Threads, #10-24 Thread Size, 1/2″ Length, Fully Threaded (Pack of 100)
- Low-head socket cap is round with a flat top and half the height of a standard socket cap head for use in thin materials and low-clearance applications. Hex socket drive has a hexagonal slot that turns using an allen key driver, permitting more compact spacing than a hex head cap screw. Alloy steel is often used in applications where strength is the primary consideration. Black oxide finish offers mild corrosion resistance and lubricity.
Steel Pan Head Machine Screw, Zinc Plated, Meets ASME B18.6.3, #2 Phillips Drive, #10-24 Thread Size, 5-1/2″ Length, Fully Threaded, Imported (Pack of 10)
- Flat head has an 82-degree cone-shaped bearing surface for use in countersunk holes and a flat top that fits flush with the mated surface. Black oxide finish offers mild corrosion resistance and lubricity. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Steel is often used in applications where strength is the primary consideration.
18-8 Stainless Steel Thread Cutting Screw, Plain Finish, Hex Washer Head, Type F, #10-24 Thread Size, 1″ Length (Pack of 10)
- Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. 18-8 stainless steel provides good corrosion resistance and strength. Hex washer head has a flange for additional grip with the mating surface and has six flat sides that a wrench can grip to turn from the side. Plain surface has no finish or coating.
18-8 Stainless Steel Thread Cutting Screw, Plain Finish, Hex Washer Head, Type F, #10-24 Thread Size, 1/2″ Length (Pack of 25)
- 18-8 stainless steel provides good corrosion resistance and strength. Plain surface has no finish or coating. Hex washer head has a flange for additional grip with the mating surface and has six flat sides that a wrench can grip to turn from the side. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic.
Nylon 6/6 Thumb Screw, Plain Finish, White, Knurled Head, Slotted Drive, Flat Point, Meets ASTM D4066/ASTM D6779, 1-1/4″ Length, Fully Threaded, #10-24 Threads (Pack of 100)
- Thumb screws allow for simple “by-hand” installation. Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations. Knurled head provides extra grip for manual tightening. Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads. Driven by a flat-bladed driver.
18-8 Stainless Steel Thread Cutting Screw, Plain Finish, 82 Degree Flat Undercut Head, Phillips Drive, Type 23, #10-24 Thread Size, 3/4″ Length (Pack of 25)
- Flat undercut head has a flat top with an 82-degree cone-shaped bearing surface and is undercut for use in shallow countersunk holes. 18-8 stainless steel provides good corrosion resistance and strength. Thread cutting screw with type 23 point style has fine threads that taper down to a blunt point with a large cutting surface suitable for soft metal, provides excellent chip clearance, and requires minimal rotating force to install. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Plain surface has no finish or coating.
316 Stainless Steel Machine Screw, Plain Finish, Flat Head, Phillips Drive, 1-1/4″ Length, #10-24 Threads (Pack of 25)
- 316 stainless steel provides strength and better corrosion resistance than 18-8 stainless steel. Plain surface has no finish or coating. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Flat head is cone shaped for use in countersunk holes and has a flat top that fits flush with the mated surface.
Steel Thread Cutting Screw, Black Oxide Finish, 82 Degree Flat Head, Phillips Drive, Type F, #10-24 Thread Size, 1″ Length (Pack of 100)
- Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Flat head has an 82-degree cone-shaped bearing surface for use in countersunk holes and a flat top that fits flush with the mated surface. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Steel is often used in applications where strength is the primary consideration. Black oxide finish offers mild corrosion resistance and lubricity.
Nylon 6/6 Pan Head Machine Screw, Black, #2 Phillips Drive, #10-24 Thread Size, 1-1/2″ Length, Fully Threaded, USA Made (Pack of 100)
- Plain surface has no finish or coating. 18-8 stainless steel provides good corrosion resistance and strength. Flat undercut head has a flat top with an 82-degree cone-shaped bearing surface and is undercut for use in shallow countersunk holes. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening.
Brass Small Pattern Machine Screw Hex Nut, Plain Finish, #10-24 Thread Size, 5/16″ Width Across Flats, 7/64″ Thick (Pack of 100)
- The nut has a small pattern design, meaning it is narrower than a standard machine screw hex nut for use in areas with limited space. The material is nonmagnetic. It has six flat sides that a wrench can grip to turn from the side, enabling use when there is no space above the nut. Several different nut styles fit a variety of application and installation requirements. . Others, such as eye nuts, thumb nuts, and wing nuts, can be tightened by hand. Brass provides corrosion resistance and offers thermal and electrical conductivity. Some nuts have a self-locking mechanism, such as a nylon patch or distorted threads, that makes them suitable for applications with a high amount of vibration. Nuts are internally threaded fasteners that are used with bolts and threaded rods and studs to connect components. Some styles, such as hex nuts, acorn nuts, flange nuts, and coupling nuts, must be tightened with a tool. The brass small pattern machine screw hex nut has a plain finish.
18-8 Stainless Steel Thread Cutting Screw, Plain Finish, 82 Degree Flat Undercut Head, Phillips Drive, Type F, #10-24 Thread Size, 7/16″ Length (Pack of 50)
- Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. 18-8 stainless steel provides good corrosion resistance and strength. Plain surface has no finish or coating. Flat undercut head has a flat top with an 82-degree cone-shaped bearing surface and is undercut for use in shallow countersunk holes.
Nylon 6/6 Pan Head Machine Screw, Black, Slotted Drive, #10-24 Thread Size, 1/2″ Length, Fully Threaded, USA Made (Pack of 100)
- Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Flat undercut head has a flat top with an 82-degree cone-shaped bearing surface and is undercut for use in shallow countersunk holes. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. 18-8 stainless steel provides good corrosion resistance and strength. Plain surface has no finish or coating.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
