17 Best and Coolest Ball Nose End Mills

 

Niagara Cutter N56017 Carbide Ball Nose End Mill, Inch, TiAlN Finish, Roughing and Finishing Cut, 30 Degree Helix, 4 Flutes, 1.5″ Overall Length, 0.063″ Cutting Diameter, 0.125″ Shank Diameter - Titanium aluminum nitride (tialn) coating lubricates the end mill for high-temperature stability and abrasion resistance, offering better heat resistance than tin and ticn coatings. Four flutes produce a better finish than fewer flutes. Ball nose end mills (also called ball end) create contoured surfaces. Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures. Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling.

 

Niagara Cutter N56016 Carbide Ball Nose End Mill, Inch, TiAlN Finish, Roughing and Finishing Cut, 30 Degree Helix, 4 Flutes, 1.5″ Overall Length, 0.063″ Cutting Diameter, 0.125″ Shank Diameter - Titanium aluminum nitride (tialn) coating lubricates the end mill for high-temperature stability and abrasion resistance, offering better heat resistance than tin and ticn coatings. Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures. Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling. Ball nose end mills (also called ball end) create contoured surfaces. Four flutes produce a better finish than fewer flutes.

 

Kodiak Cutting Tools KCT133637 USA Made Ball Nose Premium Carbide End Mill, AlTiN Coated, 4 Flute, 1/8″ Shank, 1/4″ Length of Cut, 1-1/2″ Overall Length, 1/8″ Diameter - 0001″/-. 0004″altin is a high performance coating for milling, tapping and drilling in stainless steels, carbon steels, alloy steels, titanium and cast iron. This coating is extremely heat resistant and can be used with or without coolant. 000″/-. 1/8 inch diameter solid carbide end mill, coated 1/8″ shank 1/4″ length of cut 1-1/2″ overall length 4 flute carbide, altin coated diameter tolerance +. It is exceptional in difficult to machine materials where adhesive wear is particularly high. 002″shank diameter tolerance -.

 

Richards Micro-Tool Carbide Micro Ball Nose End Mill, Diamond-Like Finish, 35 Deg Helix, 3 Flutes, 2.5″ Overall Length, 1/64″ Cutting Diameter, 1/8″ Shank Diameter - Round shanks allow use with a wide variety of toolholding systems. Diamond coatings provide extreme wear resistance, making them ideal for machining abrasive non-metals such as ceramic, fiberglass, plastics, and composites not for use machining metal. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Ad (amorphous diamond) coated “g” mills are specifically designed for machining graphite electrodes. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

 

Richards Micro-Tool Carbide Ball Nose End Mill, Diamond-Like Finish, 35 Deg Helix, 3 Flutes, 3″ Overall Length, 1/8″ Cutting Diameter, 1/8″ Shank Diameter - Ad (amorphous diamond) coated “g” mills are specifically designed for machining graphite electrodes. Diamond coatings provide extreme wear resistance, making them ideal for machining abrasive non-metals such as ceramic, fiberglass, plastics, and composites not for use machining metal. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Round shanks allow use with a wide variety of toolholding systems.

 

Richards Micro-Tool Carbide Micro Ball Nose End Mill, Diamond-Like Finish, 35 Deg Helix, 3 Flutes, 2.5″ Overall Length, 1/16″ Cutting Diameter, 1/8″ Shank Diameter - Round shanks allow use with a wide variety of toolholding systems. Ad (amorphous diamond) coated “g” mills are specifically designed for machining graphite electrodes. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Diamond coatings provide extreme wear resistance, making them ideal for machining abrasive non-metals such as ceramic, fiberglass, plastics, and composites not for use machining metal.

 

YG-1 E5062 Carbide Ball Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 6″ Overall Length, 0.25″ Cutting Diameter, 0.25″ Shank Diameter - Ball nose end mills (also called ball end) create contoured surfaces­­­. Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures. Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills. Four flutes produce a better finish than fewer flutes. Suitable for machining on hardened and high-alloy steel, steel casting, chill casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic.

 

Kodiak Cutting Tools KCT133351 USA Made Ball Nose Premium Carbide End Mill, AlTiN Coated, 4 Flute, 1/4″ Shank, 3/4″ Length of Cut, 2-1/2″ Overall Length, 1/4″ Diameter - 1/4 inch diameter solid carbide end mill, coated 1/4″ shank 3/4″ length of cut 2-1/2″ overall length 4 flute carbide, altin coated diameter tolerance +. 0001″/-. It is exceptional in difficult to machine materials where adhesive wear is particularly high. . 000″/-. 002″shank diameter tolerance -. This coating is extremely heat resistant and can be used with or without coolant. 0004″altin is a high performance coating for milling, tapping and drilling in stainless steels, carbon steels, alloy steels, titanium and cast iron.

 

Micro 100 BMSM-008-2 30° Helix Miniature Stub Length Ball Nose End Mill, 2 Flute, Metric Dimensions, Solid Carbide Tool, 0.3 mm Cutter Diameter, 3 mm Shank Diameter, 0.5 mm Flute Length, 38 mm Overall Length - Manufactured with close tolerances to ensure ultimate precision and performance. Their substrate is in a class of its own resulting from exclusive treating processes that allow for vastly increased speed and feed rates. Designed and engineered for milling applications in softer type materials requiring increased ship evacuation. Each tool’s cutting edge/tip has a distinctive mirror like finish that significantly adds to material removal while improving surface finishes. 5x to 12x reach lengths. The micro 100 bmsm-008-2 miniature, uncoated, solid carbide, 2 flute, 30° helix, center cutting, stub length ball nose end mill. Micro 100 solid carbide tools feature more than just a micro-grain of excellent quality. This line of end mills features 1. For over 45 years, micro 100 is a known industry leader and internationally acclaimed when it comes to solid carbide tooling. End mills can be utilized for both roughing and finishing.

 

Kyocera USA Made 4 Flute Standard Length Ball Nose End Mill Uncoated 0.0625 1/16in Diameter 1/8in Shank 0.188in LOC 1 1/2in OAL Series 1825 1825-0625.188 - 1/8in shank. This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. 0188in length of cut. 1 1/2in overall length. 00625 1/16in diameter.

 

Kodiak Cutting Tools KODIAK147827 USA Made Micro Carbide Ball Nose End Mill, 4 Flute, 0.060″ Diameter, 1/8″ Shank - 060 inch diameter solid carbide end mill, micro 0. 0. 180″ length of cut 1-1/2″ overall length 4 flute carbide, micro. . 125″ shank 0.

 

1/8″ Flute Carbide CNC Router Bits Ball Nose End Mills 22mm Tools Pack of 10 - Note please allow a bit hand measuring errors of 0-2mm. Can be engraved copper, aluminum ,abs, acrylic, pvc, nylon, resin, most plastics ect. Mainly used in cutting and engraving. 175mm (1/8″) shank diameter 3. Come to move slowly and accelerate gradually, but the move should not be too fast. 175mm (1/8″) cutting edge length (flute length) 22mm total length 38mm quantity 1 box /10pcs features high-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Using tips lower the cutter grasper as far as possble. Specification material carbide number of flutes 2 flute cutting diameter 3. Package includes 10 x ball nose end mills. If the chuck works with vibration, reduce the feeding speed to check if there is something wrong with chuck or fixture.

 

Lukcase® 1/8 Inch Shank 2 Flutes Router Bit Carbide Ball Nose End Mills 17mm 2 Flute CNC Cutting Tool - Note please allow a bit hand measuring errors of 0-2mm. Can be engraved copper, aluminum ,abs, acrylic, pvc, nylon, resin, most plastics ect. Specification material carbide number of flutes 2 flute cutting diameter 3. 175mm (1/8″) cutting edge length (flute length) 17mm total length 38mm quantity 1 box /10pcs features high-density polished, wear-resistant, high temperature. Come to move slowly and accelerate gradually, but the move should not be too fast. 175mm (1/8″) shank diameter 3. Using tips lower the cutter grasper as far as possble. If the chuck works with vibration, reduce the feeding speed to check if there is something wrong with chuck or fixture. Mainly used in cutting and engraving. Package includes 10 x ball nose end mills. High cost-effective, improve efficiency.

 

Micro 100 BMS-028-2 Flute 30° Helix Miniature Stub Length Ball Nose End Mill, 0.028″ Cutter Diameter, 1/8″ Shank Diameter, 0.042″ Flute Length, 1.500″ Overall Length, Solid Carbide Tool - The micro 100 bms-028-2 miniature, uncoated, solid carbide, 2 flute, 30° helix, center cutting, stub length ball nose end mill. Designed and engineered for milling applications in softer type materials requiring increased ship evacuation. 5x to 12x reach lengths. Manufactured with close tolerances to ensure ultimate precision and performance. Each tool’s cutting edge/tip has a distinctive mirror like finish that significantly adds to material removal while improving surface finishes. Micro 100 solid carbide tools feature more than just a micro-grain of excellent quality. End mills can be utilized for both roughing and finishing. Their substrate is in a class of its own resulting from exclusive treating processes that allow for vastly increased speed and feed rates. This line of end mills features 1. For over 45 years, micro 100 is a known industry leader and internationally acclaimed when it comes to solid carbide tooling.

 

Niagara Cutter N46462 Carbide Ball Nose End Mill, Metric, AlTiN Finish, Roughing and Finishing Cut, 30 Degree Helix, 4 Flutes, 39mm Overall Length, 3mm Cutting Diameter, 3.000mm Shank Diameter - Ball nose end mills (also called ball end) create contoured surfaces. Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling. Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures. Aluminum titanium nitride (altin) coating lubricates the end mill for high-temperature stability and abrasion resistance, offering better heat resistance than tin, tialn, and ticn coatings. Four flutes produce a better finish than fewer flutes.

 

Autek 10x 1/8″ Titanium Coated 2 Two Flute Carbide Ball Nose End Mills CNC Bit Router 22mm(2Qx3.22Tix10) - Material blade carbide (tungsten steel). Coated with titanium：improve the speed and feed rate of the tool ,improve the surface wear resistance. Range of processing pcb, smt, the cnc, mold, plastic, copper, stainless steel and other precision metal parts processing. “Product name two flute ball nose bit (carbide plating titanium bit) carbide rods and tungsten steel rods, with high hardness, high wear resistance, high strength, resistance to bending, anti-impairment and long tool life.

 

Autek 10x 1/8″ Titanium Coated 2 Two Flute Carbide Ball Nose End Mills CNC Bit Router 12mm(2Qx3.12Tix10) - Material blade carbide (tungsten steel). Range of processing pcb, smt, the cnc, mold, plastic, copper, stainless steel and other precision metal parts processing. “product name two flute ball nose bit (carbide plating titanium bit) carbide rods and tungsten steel rods, with high hardness, high wear resistance, high strength, resistance to bending, anti-impairment and long tool life. Coated with titanium：improve the speed and feed rate of the tool ,improve the surface wear resistance.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.