17 Best and Coolest Carbide Turning Tools

 

3/4″ Indexable Carbide Insert Turning Tool Bit Set - . 52 inserts made of c6 carbide material. There is one each of ar, al, br, bl and e, 5 pcs spare screws, 2 l wrench, a and built-in chipbreaker groove is included. This 3/4 inch indexible turning tool set contains 5 tcmt32.

 

Individual Indexable Carbide Turning Tool – SHANK: .750″ SQ Overall Length : 4-1/2″ - 750″ sq use insert # tcmt-32. 5x overall length 4-1/2″ cutting direction left hand insert ic 3/8″. Shank.

 

Carbide Mini Turning Tool 3-Piece Set - The solid carbide cutting edges stay sharper, longer when compared to steel. The handles are turned from fine, solid ash, and are ergonomic with molded rubber that enhances your grip and reduces fatigue. Square carbide mini turning tool is ideal for flat or convex areas on spindles and pen turnings. Square cutter is 3/8″ square. Ash handles are 9-1/2″ long from the butt of the handle to the top of the stainless steel ferrule. Carbide cutters are not interchangeable between the different tools. Our mini carbide turning tools feature a replaceable and rotatable cutter that eliminates the hassle and downtime of sharpening. Simply rotate the carbide cutter for a fresh, sharp edge, and replace it once all available edges have grown dull. Diamond carbide mini turning tool is ideal for use as a parting tool, and for tight profiles. The tools are available in three cutting profiles round, square and diamond-shaped. Round carbide mini turning tool is ideal for producing a smooth finish on curved, concave surfaces and for general turning applications. Angle of diamond cutter is approximately 35 degrees. Total overall length of mini turning tools is approximately 13-1/2″. Length of the shaft is approximately 4″. Diameter of the circular cutter is just under 1/2″. Overall length of the diamond cutter is 1-1/8″.

 

Round Carbide Turning Tool Replacement Cutter -R1 - This solid carbide cutter was sharpened on a diamond wheel to 1500 grit, and can be rotated to give you a fresh edge in only seconds use it with the round carbide mini turning tool or the round carbide pen turning tool (both sold separately) to get smooth finishes on concave surfacestechnical details ideal for giving you a smooth finish on curved, concave surfaces and for general turning applications. Sharpened on a diamond wheel to 1500 grit. Cutter rotates, giving you numerous fresh edges with no need for sharpening. Solid carbide stays sharper for longer, when compared with steel. .

 

YUFU-Diamond shape Carbide Replacement Insert Cutter 10mm(.39″)X28mm(1.10″),Diameter 4.3mm(.17″) , Pack of 1, For Mini, Mid Full And Pro Size Detailers Lathe Wood Turning Cutting Tools - Size diamond shape 10mm (39″) x 28mm(110″) , thickness 25mm (10″) , dia 43mm(17″). Optimal grinding process produces the flattest and smoothest cutting surface. 30 degree cutting angle , mount with #4-40 8mm flat head screw. Made of solid tungsten carbide, providing you a better experience and durable use. Holds a cutting edge up to 20 times longer than hss,1 pcs per pack, save more .

 

Savannah Large Round Carbide Turning Tool - It is ideal for wood turners of all skill levels and helps ensure success right from the start. All you have to do is rotate the the cutter head for a clean, sharp edge and continue turning. The large round cutter (item # 10747) is ideal for curved, concave surfaces and can also be used for general woodturning applications. With the savannah large carbide turning tool, you can get right to turning without all the fuss. The savannah large carbide turning tool is designed with ease of use in mind. Once the cutter head is completely used, simply replace it with a new carbide cutter ((item # 10747). To make turning even more enjoyable, the shaft of the savannah carbide turning tool also features a flat back for stability while your turning. The solid carbide stays sharper for a longer period of time in comparison to steel tools. The comfortable rubber grip helps reduce hand fatigue while turning. The savannah large round carbide turning tool eliminates the need for sharpening of your turning tools since it features a rotatable cutter head. The solid wood ash handle is coated with a comfortable rubber grip on the base that transitions to the wooden top part of the handle seamlessly. 7537 features • sharpening not necessary • last longer than steel tools • replaceable cutter heads • solid ash handle is coated with a soft rubber grip • shaft length is approximately 6-1/2″ • handle length is approximately 13-1/2″ from the butt to the stainless steel ferrule • round carbide cutter head included please note the carbide cutter on this tool is not interchangeable with any of the other savannah carbide turning tools (7538,7539 & 7540).

 

Savannah 3 Piece Large Carbide Turning Tool Set - Set includes the large round (# 7537), square (# 7538) and diamond (# 7539) cutter tools, each of which can be purchased separately for $89. The comfortable rubber grip helps reduce hand fatigue while turning. Once the cutter head is completely used, simply replace it with a new carbide cutter. The solid wood ash handle is coated with a comfortable rubber grip on the base that transitions to the wooden top part of the handle seamlessly. It is ideal for wood turners of all skill levels and helps ensure success right from the start. All you have to do is rotate the the cutter head for a clean, sharp edge and continue turning. 99 each. The savannah large carbide turning tools are designed with ease of use in mind. The savannah carbide turning tools eliminate the need for sharpening of your turning tools since it features a rotatable cutter head. To make turning even more enjoyable, the shaft of the savannah carbide turning tool also features a flat back for stability while your turning. With the savannah large carbide turning tool, you can get right to turning without all the fuss. The solid carbide stays sharper for a longer period of time in comparison to steel tools.

 

Diamond Carbide Mini Turning Tool - Length of the shaft is approximately 4″. The handles are made of solid ash encased with a thick, molded rubber end for an enhanced grip and reduced fatigue. Ash handles feature a molded rubber end for a secure, effortless grip and excellent ergonomics. Shaft features a flattened back for stability when using the tool rest. Note carbide cutters are not interchangeable between the different tools. Technical details ideal for use as a parting tool, and for tight profiles. Total overall length of mini turning tool is approximately 13-1/2″. Length of the diamond cutter is 1-1/8″, with an angle of about 35 degrees. This diamond carbide mini turning tool from rockler features a replaceable and rotatable cutter that eliminates the hassle and downtime of sharpening. Simply rotate the carbide cutter for a fresh, sharp edge, and replace it once all available edges have grown dull. The solid carbide cutter also stays sharp for longer when compared with steel, giving you a much longer useful life. Ash handles are 9-1/2″ long from the butt of the handle to the top of the stainless steel ferrule.   Also available from rockler round carbide mini turning tool square carbide mini turning tool carbide mini turning tool 3-piece set.

 

Mid-size Simple Woodturning Tools Set of 3 Carbide Turning Tools with Interchangeable Handle for Wood Lathe (3 Tools w/Red Metallic handle) - Interchangeable handle comes in metallic red, blue, green, gold, charcoal or super mirror black. Comes with mid simple turner & hollower, mid simple rougher 2″ radius, mid simple 55° detailer. Set of 3 woodturning tools plus interchangeable handle of your color choice, or all 3 handles. Simple woodturning tools are made in st michael, minnesota made in the usa. Handle is interchangeable with all mid size simple woodturning tools.

 

YUFU-TOOL Wood Working Reversible Index-able Carbide Inserts(14mm lengthX14mm widthX2.0mm thickness) ,Pack of 1, Designed for Spiral/Helical Planer Cutter Head, wood turning lathe tool - Holds a cutting edge up to 20 times longer than hss. Made of solid tungsten carbide, providing you a better experience and durable use. Designed for numerous spiral/helical planer cutter head system and diy wood lathe turning tools. Easy to replace your jointers and planers, excellent accessory for wood turning work. Four usable sides(14mm length x14mm width), and all are of the same sharpness.

 

Individual Indexable Carbide Turning Tool – SHANK: .500″ SQ Overall Length : 3-1/2″ - 500″ sq use insert # tcmt-32. 5x overall length 3-1/2″ cutting direction right hand insert ic 3/8″. Shank.

 

7 Pc 3/8” Indexable Carbide Turning Tool Set SCLCL SDJCR SWGCR SDNCN MGEHR SER - Carbide inserts length3″ longcarbide inserts includes(1) sclcl 3/8″(1) sdncn 3/8″(1)sdjcr 3/8″. 7 pc 3/8” indexable carbide turning tool set. Quantity 1 shipping weight 14 lbs. Case includedcase overall dimension 5”-7/8l x 7”w x 1-3/8”h. (1) sclcr 3/8″(1) swgcr 3/8”(1) ser 3/8”-11(1) mgehr 3/8”-2.

 

Round Carbide Mini Turning Tool - Ash handles are 9-1/2″ long from the butt of the handle to the top of the stainless steel ferrule. Length of the shaft is approximately 4″. Total overall length of mini turning tool is approximately 13-1/2″. Ash handles feature molded rubber for a secure, effortless grip and excellent ergonomics. The handles are made of solid ash encased with a thick, molded rubber end for an enhanced grip and reduced fatigue.   Also available from rockler diamond carbide mini turning tool square carbide mini turning tool carbide mini turning tool 3-piece set note carbide cutters are not interchangeable between the different tools. Diameter of the round cutter is just under 1/2″. The solid carbide cutter also stays sharp for longer when compared with steel, giving you a much longer useful life. Technical details ideal for giving you a smooth finish on curved, concave surfaces and for general turning applications. Simply rotate the carbide cutter for a fresh, sharp edge, and replace it once all available edges have grown dull. This round carbide mini turning tool from rockler features a replaceable and rotatable cutter that eliminates the hassle and downtime of sharpening. Shaft features a flattened back for stability when using the tool rest.

 

YUFU-Diamond shape Carbide Replacement Insert Cutter 10mm(.39″)X28mm(1.10″),Diameter 4.3mm(.17″) , Pack of 10, For Mini, Mid Full And Pro Size Detailers Lathe Wood Turning Cutting Tools - Size diamond shape 10mm (39″) x 28mm(110″) , thickness 25mm (10″) , dia 43mm(17″). Optimal grinding process produces the flattest and smoothest cutting surface. Holds a cutting edge up to 20 times longer than hss,10 pcs per pack, save more . 30 degree cutting angle , mount with #4-40 8mm flat head screw. Made of solid tungsten carbide, providing you a better experience and durable use.

 

YUFU-Round Carbide Replacement lathe tools Insert Cutter 5/8 Inch Diameter 16mm, Pack of 10, For Full And Pro Size Hollower Lathe Wood Turning - Optimal grinding process produces the flattest and smoothest cutting surface. The perfect grade of carbide provides the best combination of the sharpness and durability. Excellent for hollowing bowls, designed for all small &mid size hollowers,the right geometry or cutting angle is ground to provide an edge the cuts cleanly and safely,ex. Mounts with flat head screws, m4 or m5, leaves smooth finishing after cut. Per pack of 10 pcs round carbide insert cutters,diameter approximately 5/8″ (16mm) thickness 118″ (3mm) with a 178″ dia countersink mounting hole at std 82 degrees.

 

Individual Indexable Carbide Turning Tool – SHANK: .3750″ SQ Overall Length : 3-1/2″ - Shank. 3750″ sq use insert # tcmt-21. 5x overall length 3-1/2″ cutting direction neutral insert ic 1/4″.

 

Savannah Hollowing Carbide Turning Tool - The shank is flat on both sides offering you great stability while hollowing small or large forms. The shank measure approximately 8-3/4″ from the top of the stainless steel ferrule to the center of the carbide cutter head. The handle measures approximately 19″ in length from the butt to the stainless steel ferrule and is coated with a rubber grip at the base to reduce hand fatigue. Designed to allow any skill level of turners to achieve high quality results for hollowing work with virtually no fuss. The unique shape of the hollower neck is designed to give you better access to the most difficult hollow form shapes. Once the carbide cutter is completely used up, simply replace the tip with a new one (item#10753). . The round carbide cutter head can be rotated as needed for clean, sharp cutting edge. The savannah hollowing carbide turning tool is the perfect tool for under-cutting hollow forms.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.