17 Best and Coolest Chop Saw Blades

 

Forney 72356 Chop Saw Blade Type 1 High Speed Metal with 1-Inch Arbor A24R-BF 14-Inch-by-532-Inch

Forney 72356 Chop Saw Blade, Type 1 High Speed Metal with 1-Inch Arbor, A24R-BF, 14-Inch-by-5/32-Inch

Forney 72356 Chop Saw Blade, Type 1 High Speed Metal with 1-Inch Arbor, A24R-BF, 14-Inch-by-5/32-Inch - 54 cm) arbor. 96 mm) with 1-inch (2. Note harder wheel have a longer life where a softer wheel will cut faster. Fine grain=long life=slower cutting and grinding. The forney 72356 14-inch type 1 steel cutting wheel is an aluminum oxide metal cutting wheel. Wheel types type 1=flat wheel for cutting, type 27=depressed center wheel, type 28=hat shaped for grinding and type 29=flap disc for grinding and finishing. Coarse grain=short life=fast cutting or grinding. Designed to be used on chop saws and hand held gas saws. This warranty does not cover any product that has been subject to misuse, neglect, negligence or accident, or that has been used in any way contrary to the purpose intended. Typical spec example a24r-bf a=used for steel, 24=grit (coarse), r=medium to hard bond. The third series of letters indicates bond hardness a-n=soft, o-s=medium and t-z=hard. A24r-bf with max 5,400 rpm. 56 cm) by 5/32-inch (3. 14-inch (35. Used on ferrous materials. Proof of purchase required. Designed for metal cutting, metal abrasion, body work, metal fabrication and general repair work. The first series of letters indicates grain type a=aluminum oxide (used in metal applications) c=silicon carbide (used for masonry applications) za= alumina zirconium used for (stainless steel and ferrous metal applications) ta=ceramic treated aluminum oxide (used for metal applications) the second series of letters indicates grain size or grit 8-24=coarse, 30-60=medium, 70-180=fine and 220-up=hard. The fourth series of letters indicates type of bond bf=retinoid fiberglass reinforced (double bonded), e=shellac, r=rubber and v=vitrified. Claims for warranty must be made within 90 days of the date of purchase.

 

Forrest CM08Q606100 Chopmaster 8-14-Inch 60 Tooth ATB Miter Saw Blade with 58-Inch Arbor

Forrest CM08Q606100 Chopmaster 8-1/4-Inch 60 Tooth ATB Miter Saw Blade with 5/8-Inch Arbor

Forrest CM08Q606100 Chopmaster 8-1/4-Inch 60 Tooth ATB Miter Saw Blade with 5/8-Inch Arbor - Feeds easily when used for moderate rips and crosscuts on a table saw. Eliminates bottom splintering on radial crosscuts. Reduces “jump in” for better “pull-control”. Saves 1/3 wood loss on each cut. With new 30° atb tooth style this blade stops totally, all bottom and top splintering on ply veneers on both radial and table saw machines.

 

OX OX-UMC-14 Ultimate Metal Cutting 14-Inch Chop Saw Blade

OX OX-UMC-14 Ultimate Metal Cutting 14-Inch Chop Saw Blade

OX OX-UMC-14 Ultimate Metal Cutting 14-Inch Chop Saw Blade - The ox umb ultimate metal cutting blade is designed to cut all metal including ductile iron pipe, plastic pipe, cast iron, rebar, angle iron, threaded rod, fiberglass and rubber. Guaranteed to perform. They’re backed by every safety standard, including iso 9001 and en13235. When only the best will do, ultimate says it all. Ox ultimate series diamond blades stand apart from the crowd. Guaranteed safe.

 

Forney 71866 Chop Saw Blade with 1-Inch Arbor Metal Type 1 A36R-BF 14-Inch-by-332-Inch

Forney 71866 Chop Saw Blade with 1-Inch Arbor, Metal Type 1, A36R-BF, 14-Inch-by-3/32-Inch

Forney 71866 Chop Saw Blade with 1-Inch Arbor, Metal Type 1, A36R-BF, 14-Inch-by-3/32-Inch - 14″ x 3/32″, metal type 1, cutting wheel, 1″ arbor, aluminum oxide, designed for metal cutting metal abrasion, body work, metal fabrication & general repair work, used on ferrous materials, designed to be used on chop saws only. .

 

14 x 18 x 1 T1 Chop Saw Blade Abrasive Cutting Wheel - 10 Pack

14″ x 1/8″ x 1″ T1 Chop Saw Blade Abrasive Cutting Wheel – 10 Pack

14″ x 1/8″ x 1″ T1 Chop Saw Blade Abrasive Cutting Wheel – 10 Pack - These cut off wheels have been engineered to stand up to stringent european standards. . Don’t be fooled by poorly constructed, cheap imitations claiming to offer you the same level of quality. In tests the product has performed as well as or surpassed many of the most recognizable brand names in the construction business, worldwide. Why pay more for the same quality our quality cut off wheels offer a long service life, require less force to complete each cut, vibration free cut and maximized cutting capacity at a fraction of the cost.

 

Forrest CM08H606100 Chopmaster 8-12-Inch 60 Tooth ATB Miter Saw Blade with 58-Inch Arbor

Forrest CM08H606100 Chopmaster 8-1/2-Inch 60 Tooth ATB Miter Saw Blade with 5/8-Inch Arbor

Forrest CM08H606100 Chopmaster 8-1/2-Inch 60 Tooth ATB Miter Saw Blade with 5/8-Inch Arbor - A heavier than normal steel plate maintains maximum stability for the best cut. With new 30° atb tooth style this blade stops totally, all bottom and top splintering on ply veneers on both radial and table saw machines. Eliminates bottom splintering on radial crosscuts. Each blade is hand straightened to run out of 001″/002″ for maximum cut quality. A negative face hook also adds to optimum rigidity when cutting.

 

Forrest CM12806115 Chopmaster 12-Inch 80-tooth ATB Miter Saw Blade with 1-Inch Arbor

Forrest CM12806115 Chopmaster 12-Inch 80-tooth ATB Miter Saw Blade with 1-Inch Arbor

Forrest CM12806115 Chopmaster 12-Inch 80-tooth ATB Miter Saw Blade with 1-Inch Arbor - With new 30° atb tooth style this blade stops totally, all bottom and top splintering on ply veneers on both radial and table saw machines. Saves 1/3 wood loss on each cut. Feeds easily when used for moderate rips and crosscuts on a table saw. Reduces “jump in” for better “pull-control”. Eliminates bottom splintering on radial crosscuts.

 

DEWALT DW8500 14-Inch by 1-Inch Diamond Edge Chop Saw Blade

DEWALT DW8500 14-Inch by 1-Inch Diamond Edge Chop Saw Blade

DEWALT DW8500 14-Inch by 1-Inch Diamond Edge Chop Saw Blade - Advanced brazing technology cuts metal with the speed of a conventional abrasive blades. Use on the same tool as a conventional blades with similar operating speeds and cutting force. Diamond edge provides 100x the life vs standard dewalt chop saw wheels. Exposed diamond matrix allows the blade to cut concrete, plastic, fiberglass, rubbber, non-ferrous metals and other soft materials without loading. Steel blade cores provides constant cutting depth, capcity and stability of a sold core.

 

- Norton Chop Saw Blade - 14india Model 076607-89399-4

– Norton Chop Saw Blade – 14in.dia., Model# 076607-89399-4

- Norton Chop Saw Blade – 14in.dia., Model# 076607-89399-4 - Wheel dimensions are diameter x thickness x arbor. ) 7/64, wheel type a36-p, arbor size (in. ) 1, wheels (qty. ) 14. Max. Aluminum oxide is recommended for all types of ferrous metals. ) 1, wheel diameter (in. Rpm 4,365, recommended use ferrous metals, wheel thickness (in. A36-p chop-saw blade made for a wide range of grinding, shaping and cutting jobs in home workshops, farms and machine shops.

 

Forney 71895 Chop Saw Blade with 1-Inch Arbor Masonry Type 1 C20R-BF 14-Inch-by-18-Inch

Forney 71895 Chop Saw Blade with 1-Inch Arbor, Masonry Type 1, C20R-BF, 14-Inch-by-1/8-Inch

Forney 71895 Chop Saw Blade with 1-Inch Arbor, Masonry Type 1, C20R-BF, 14-Inch-by-1/8-Inch - The fourth series of letters indicates type of bond bf=retinoid fiberglass reinforced (double bonded), e=shellac, r=rubber and v=vitrified. Designed to be used on stationary saw machines only. C20r-bf with max 4,365 rpm. 18 mm) with 1-inch (25. The third series of letters indicates bond hardness a-n=soft, o-s=medium and t-z=hard. Note harder wheel have a longer life where a softer wheel will cut faster. Quality made to provide fast, safe, dependable service. Proof of purchase required. The forney 71895-inch type 1 masonry asphalt cutting wheel is silicon carbide and dual fiberglass reinforced. Used primarily on ceramic, masonry, plastic and other non-ferrous materials. Wheel types type 1=flat wheel for cutting, type 27=depressed center wheel, type 28=hat shaped for grinding and type 29=flap disc for grinding and finishing. 6 mm) by 1/8-inch (3. This warranty does not cover any product that has been subject to misuse, neglect, negligence or accident, or that has been used in any way contrary to the purpose intended. Typical spec example a24r-bf a=used for steel, 24=grit (coarse), r=medium to hard bond. 4 mm) arbor. Claims for warranty must be made within 90 days of the date of purchase. The first series of letters indicates grain type a=aluminum oxide (used in metal applications) c=silicon carbide (used for masonry applications) za= alumina zirconium used for (stainless steel and ferrous metal applications) ta=ceramic treated aluminum oxide (used for metal applications) the second series of letters indicates grain size or grit 8-24=coarse, 30-60=medium, 70-180=fine and 220-up=hard. Coarse grain=short life=fast cutting or grinding. 14-inch (355. Fine grain=long life=slower cutting and grinding.

 

Oshlun SBFD-14 14-Inch Diamond Chop Saw Blade with 1-Inch Arbor of 20mm Bushing for Stainless and Ferrous Metals

Oshlun SBFD-14 14-Inch Diamond Chop Saw Blade with 1-Inch Arbor of 20mm Bushing for Stainless and Ferrous Metals

Oshlun SBFD-14 14-Inch Diamond Chop Saw Blade with 1-Inch Arbor of 20mm Bushing for Stainless and Ferrous Metals - It can also be used to cut almost everything including plastic, fiberglass, concrete, and rubber. Our diamond chop saw blade is ideal for cutting all types of metals, including stainless steel, with an abrasive chop saw. The premium diamond edge will last up to 100 times longer than a standard abrasive chop saw wheel.

 

Norton Chop Saw Blades 14in 5 Pack Model 03970 Misc

Norton Chop Saw Blades 14in, 5 Pack, Model# 03970 [Misc.]

Norton Chop Saw Blades 14in, 5 Pack, Model# 03970 [Misc.] - 5, wheel thickness in. 1, max. 7/64, arbor size in. Stationary chop saws, including wel-bilt item#s 1591300 and 15913. Wheels qty. Quality norton chop saw blades are engineered to cut metal studs, rebar, angle iron and tubing. Rpm 4,365, recommended use metal studs, rebar, angle iron, tubing, wheel diameter in. For use with 14in. 14 inch.

 

Forrest CM10806105 Chopmaster 10-Inch 80 Tooth ATBR Miter and Radial Saw Blade with 58-Inch Arbor

Forrest CM10806105 Chopmaster 10-Inch 80 Tooth ATBR Miter and Radial Saw Blade with 5/8-Inch Arbor

Forrest CM10806105 Chopmaster 10-Inch 80 Tooth ATBR Miter and Radial Saw Blade with 5/8-Inch Arbor - Ends cutting 1/16″ oversize to allow for resurfacing. Double hard and 40% stronger c-4 carbide will give up to 300% longer life between sharpenings. Buy and sharpen one blade instead of 3, (24t rip, 50t combination, 80t crosscut). 20° face hook for easy feed. Ends second-step finishing (jointing and sanding not required).

 

14 x 18 x 1 Metal CUT-OFF WHEELS chop saw blades - 10 Pack

14″ x 1/8″ x 1″ Metal CUT-OFF WHEELS chop saw blades – 10 Pack

14″ x 1/8″ x 1″ Metal CUT-OFF WHEELS chop saw blades – 10 Pack - All of them are externally reinforced with layers of fiberglass for maximum safety, and can reduce cutting time 50%, require less force and provide vibration-free cutting, no burring to avoid rework. They are specially designed for aggressive removal of materials without loading and very fast stock removal on metal and stainless steel. H&m abrasives-usa’s cut-off wheels are manufactured in accordance with iso 9001 standard.

 

Forney 72355 Chop Saw Blade Type 1 High Speed Metal with 20-Millimeter Arbor A24R-BF 14-Inch-by-532-Inch

Forney 72355 Chop Saw Blade, Type 1 High Speed Metal with 20-Millimeter Arbor, A24R-BF, 14-Inch-by-5/32-Inch

Forney 72355 Chop Saw Blade, Type 1 High Speed Metal with 20-Millimeter Arbor, A24R-BF, 14-Inch-by-5/32-Inch - Claims for warranty must be made within 90 days of the date of purchase. The first series of letters indicates grain type a=aluminum oxide (used in metal applications) c=silicon carbide (used for masonry applications) za= alumina zirconium used for (stainless steel and ferrous metal applications) ta=ceramic treated aluminum oxide (used for metal applications) the second series of letters indicates grain size or grit 8-24=coarse, 30-60=medium, 70-180=fine and 220-up=hard. Wheel types type 1=flat wheel for cutting, type 27=depressed center wheel, type 28=hat shaped for grinding and type 29=flap disc for grinding and finishing. 787-inch) arbor. 14-inch (35. Fine grain=long life=slower cutting and grinding. Coarse grain=short life=fast cutting or grinding. Proof of purchase required. Typical spec example a24r-bf a=used for steel, 24=grit (coarse), r=medium to hard bond. Note harder wheel have a longer life where a softer wheel will cut faster. 96 mm) with 20 millimeter (. The forney 72355 14-inch type 1 steel cutting wheel is an aluminum oxide metal cutting wheel. The third series of letters indicates bond hardness a-n=soft, o-s=medium and t-z=hard. Designed for metal cutting, metal abrasion, body work, metal fabrication and general repair work. Used on ferrous materials. 56 cm) by 5/32-inch (3. This warranty does not cover any product that has been subject to misuse, neglect, negligence or accident, or that has been used in any way contrary to the purpose intended. Designed to be used on chop saws and hand held gas saws. The fourth series of letters indicates type of bond bf=retinoid fiberglass reinforced (double bonded), e=shellac, r=rubber and v=vitrified. A24r-bf with max 5,400 rpm’s.

 

2 Evolution Rage355 14 36T Tungsten Carbide Multi-Purpose Chop Saw Blades

(2) Evolution Rage355 14″ 36T Tungsten Carbide Multi-Purpose Chop Saw Blades

(2) Evolution Rage355 14″ 36T Tungsten Carbide Multi-Purpose Chop Saw Blades - 1″ arbor. For use with evolution rage2, 14″ multi-purpose chop saw. Quantity of (2) rage355 14″ tungsten carbide tipped saw blades. Blade diameter 355mm (approx 14″). Capable of cutting steel, aluminum, wood & plastics using single blade.

 

Forney 71860 Chop Saw Blade with 58-Inch Arbor Metal Type 1 A36R-BF 10-Inch-by-18-Inch

Forney 71860 Chop Saw Blade with 5/8-Inch Arbor, Metal Type 1, A36R-BF, 10-Inch-by-1/8-Inch

Forney 71860 Chop Saw Blade with 5/8-Inch Arbor, Metal Type 1, A36R-BF, 10-Inch-by-1/8-Inch - The first series of letters indicates grain type a=aluminum oxide (used in metal applications) c=silicon carbide (used for masonry applications) za= alumina zirconium used for (stainless steel and ferrous metal applications) ta=ceramic treated aluminum oxide (used for metal applications) the second series of letters indicates grain size or grit 8-24=coarse, 30-60=medium, 70-180=fine and 220-up=hard. A36r-bf with max 6,100 rpm. Designed for metal cutting, metal abrasion, body work, metal fabrication and general repair work. Note harder wheel have a longer life where a softer wheel will cut faster. Typical spec example a24r-bf a=used for steel, 24=grit (coarse), r=medium to hard bond. This warranty does not cover any product that has been subject to misuse, neglect, negligence or accident, or that has been used in any way contrary to the purpose intended. 4 cm) by 1/8-inch (3. Wheel types type 1=flat wheel for cutting, type 27=depressed center wheel, type 28=hat shaped for grinding and type 29=flap disc for grinding and finishing. The fourth series of letters indicates type of bond bf=retinoid fiberglass reinforced (double bonded), e=shellac, r=rubber and v=vitrified. 18 mm) with 5/8-inch (15. Used on ferrous materials. 88 mm) arbor. Claims for warranty must be made within 90 days of the date of purchase. The third series of letters indicates bond hardness a-n=soft, o-s=medium and t-z=hard. Proof of purchase required. Designed to be used on chop saws only. Fine grain=long life=slower cutting and grinding. Coarse grain=short life=fast cutting or grinding. 10-inch (25. The forney 71860 10-inch type 1 steel cutting wheel is an aluminum oxide metal cutting wheel.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.