Lenox Tools 1211416DGDS Diamond Grit Hole Saw D/S-16Dg, 1″ or 25.4mm
- Fast and easy cutting. Provides more holes in less time. Ideal for cement board, abrasives, tile and stone. The product is 1″ diamond hole saw. Easy to use. The product is manufactured in china. Easy plug removal. Diamond edge for longer life and speed.
Starrett KD0136-N 1.3/16-Inch Diamond Grit Holesaw
- Always use a coolant and start at a low speed, increase speed as ease of cutting is noticed while avoiding heat build-up on the cutting surface. Effective cutting of hardened steels, fired ceramics, aggregate containing concrete, non-metallics and other difficult to cut materials. Uniform synthetic diamond grit bonded over a durable steel platform. Recommended cutting speed is from 150 to 300-rpm. Clean effective cuts and extended life.
Starrett KD0258-N 2.5/8-Inch Diamond Grit Holesaw
- Recommended cutting speed is from 150 to 300-rpm. Always use a coolant and start at a low speed, increase speed as ease of cutting is noticed while avoiding heat build-up on the cutting surface. Clean effective cuts and extended life. Effective cutting of hardened steels, fired ceramics, aggregate containing concrete, non-metallics and other difficult to cut materials. Uniform synthetic diamond grit bonded over a durable steel platform.
Lenox Tools 1211212DGDS Diamond Grit Hole Saw D/S-12Dg, 3/4″ or 14.3mm
- Easy plug removal. Diamond edge for longer life and speed. Provides more holes in less time. The product is 3/4″ diamond hole saw. Easy to use. Ideal for cement board, abrasives, tile and stone. Fast and easy cutting. The product is manufactured in china.
(1 Piece w/Arbor) 5/16″ Diamond Grit Holesaw
- Diameter 1-3/8″ depth of cut 1-1/2″ uses a standard arbor or snap-back arbors for use on slate, granite, marble, tile, glass and more fast, easy cutting low torque, little pressure required round holes makes removing plugs faster and easier. Diameter 5/16″ shank 3/8″ one piece design for use on slate, granite, marble, tile, glass and more fast, easy cutting low torque, little pressure required oversized slots make for easier plug removal. Diameter 1-1/2″ depth of cut 1-1/2″ uses a standard arbor or snap-back arbors for use on slate, granite, marble, tile, glass and more fast, easy cutting low torque, little pressure required round holes makes removing plugs faster and easier. Quick start tip.
Starrett KD0400-N 4-Inch Diamond Grit Holesaw
- Effective cutting of hardened steels, fired ceramics, aggregate containing concrete, non-metallics and other difficult to cut materials. Recommended cutting speed is from 150 to 300-rpm. Uniform synthetic diamond grit bonded over a durable steel platform. Always use a coolant and start at a low speed, increase speed as ease of cutting is noticed while avoiding heat build-up on the cutting surface. Clean effective cuts and extended life.
Starrett KD0414-N 4.1/4-Inch Diamond Grit Holesaw
- Always use a coolant and start at a low speed, increase speed as ease of cutting is noticed while avoiding heat build-up on the cutting surface. Recommended cutting speed is from 150 to 300-rpm. Uniform synthetic diamond grit bonded over a durable steel platform. Effective cutting of hardened steels, fired ceramics, aggregate containing concrete, non-metallics and other difficult to cut materials. Clean effective cuts and extended life.
M. K. Morse DGAPC Auto Pilot for Diamond Grit Hole Saws
- K. M. They are great for cutting natural stone, porcelain, or masonry products, just to name a few. Morse diamond grit hole saws are the ones home owners and contractors want to make their lives easier. These hole saws provide longer life and faster cutting in hard to cut materials than conventional carbide grit or carbide tipped hole saws.
Lenox Tools 1211520DGHS 20 Diamond Grit Hole Saw, 1-1/4-Inch or 31.8mm
- Ideal for cement board, abrasives, tile and stone. A brazed diamond edge for more holes in tile and stone and cuts holes in less time than carbide grit or carbide tipped hole saws, uses a standard arbor. Fast and easy cutting. Diamond edge for longer life and speed. Easy plug removal. Provides more holes in less time.
Starrett KD0214-N 2.1/4-Inch Diamond Grit Holesaw
- Clean effective cuts and extended life. Effective cutting of hardened steels, fired ceramics, aggregate containing concrete, non-metallics and other difficult to cut materials. Uniform synthetic diamond grit bonded over a durable steel platform. Always use a coolant and start at a low speed, increase speed as ease of cutting is noticed while avoiding heat build-up on the cutting surface. Recommended cutting speed is from 150 to 300-rpm.
Exchange-a-Blade Stay Sharp 2055007 1-1/2-Inch (38mm) Diamond Grit Hole Saw
- Drill clean, accurate holes in ceramic, marble, glass, fiberglass and hardier-plank. Includes drilling template wet cutting only. Measures 1-1/2 inches diameter. For use with handheld or press drills. High grade diamonds ensure long life.
Bastex Diamond Grit Hole Saw Bit Drill Set (3pc). Includes 6mm, 8mm, 10mm bit Sizes, Made for Cutting Ceramic Tile Marble Glass Porcelain and Most Hard Surfaces.
- Warranty we are proud of any product that bears our name so we include a 30 day money back guarantee with every item if you don’t like it for any reason, send it back we also include a 1 year replacement warranty. General usage diamond hole saw bits are versatile drill bits that allow you to cleanly cut glass, ceramics, porcelain, ceramic tile, porcelain tile, limestone, slate, marble, granite, light stone and fiberglass most importantly with diamond drill bits you greatly improve the accuracy of the hole than standard bits it is important to note that you must keep your drill bit wet as the friction of the bits and materials build up heat quickly. Quality made from high strength carbon steel makes these drill bits durable and precise steel construction also makes for a longer lasting tools set when you need to drill holes rest assured these bits will be ready nickel-plated with a diamond dust coating offers superior performance and cutting strength. Sizes includes the following diameters, 6mm, 8mm, 10mm for use on wood, porcelain, glass, tile, ceramics, stone, masonry, granite and other hard surfaces. Precision all the bits are processed for a smooth and exact finish this type of production leads to a consistent product where every job is done fast, efficient and correct will work with all electric drills cuts clean, perfectly round holes to a depth of approximately 7/8 inches.
(No Arbor) 1-3/8″ Diamond Grit Holesaw
- Diameter 1-3/8″ depth of cut 1-1/2″ uses a standard arbor or snap-back arbors for use on slate, granite, marble, tile, glass and more fast, easy cutting low torque, little pressure required round holes makes removing plugs faster and easier. Retractable centering pin. Quick start tip. Diameter 1-1/2″ depth of cut 1-1/2″ uses a standard arbor or snap-back arbors for use on slate, granite, marble, tile, glass and more fast, easy cutting low torque, little pressure required round holes makes removing plugs faster and easier.
Diamond Drill Bits,5 PCS Diamond Grit Hole Saw Drill Bit Set Hollow Core Drill Bits Extractor Remover Tools Hole Saws For Glass,Ceramics,Bottle,Porcelain,Marble.5/32″ – ½”
- Wide usage hollow core drill bitsthis diamond coated core drill bit removes a complete circle from glass,tiles,granite and so on,diy for drill glass,tile bottles,blocks jars,fiberglass porcelain tile ceramic,slate marble,granite light stone. 5 different size diamond drill bit size5/32″, ¼”, 5/16″, 3/8″, and ½”drill bit set,perfect size diamond hole saw for cutting accurate holes in a wide variety of materials such as glass,ceramics,bottles,porcelain and marble. Please attention diamond hole sawplease keep adding lubrication or water when the diamond drill bits are workinglow drill pressure and increased use of water lubrication will extend drill bit life considerable. Durable and sturdy diamond hole sawdiamond grit hole saw bit set made of high-speed steel have a long service life and good performance that excellent for making accurate and clean hole. Sharp and smooth glass drill bit hollow core drill bits with high quality diamond,the diamond hole saw creates a high precision,smooth cut with no broken edges.
Vaorwne 10pcs 5mm Diamond Grit Hole Saw Drill Bit for Tile Glass
- The measurement allowed error is +/- 1-3cm. 5 mm (0. 17)total length 51 mm eachcolor silver-colored weight 50gscope of delivery 10 x glass perforated sawonly the above package content, other products are not included. Vaorwne is a brand that has already been registered. 10pcs 5mm diamond grit hole saw drill bit for tile glassproduct name hole saw material emeryhole diameter approx. Only the authorized sellers are allowed to sell products under gaoominy. Note light shooting and different displays may cause the color of the item in the picture a little different from the real thing. Gaoominy will provide you with high-quality products and best after-sale service. 19 inches)shank diameter 4. 5mm (0.
Starrett KD0300-N 3-Inch Diamond Grit Holesaw
- Effective cutting of hardened steels, fired ceramics, aggregate containing concrete, non-metallics and other difficult to cut materials. Uniform synthetic diamond grit bonded over a durable steel platform. Recommended cutting speed is from 150 to 300-rpm. Always use a coolant and start at a low speed, increase speed as ease of cutting is noticed while avoiding heat build-up on the cutting surface. Clean effective cuts and extended life.
LDEXIN Diamond Grit Hole Saw Drill Bit for Granite and Marble Golden Diamond Saw Hole 35mm / 1.38inch
- 💫【sharp and smooth cut】coated with high quality diamond, the diamond hole saw creates a high precision, smooth cut,less chipping and minimizing any breakage. 💫【drill speed】reduced drill speeds, low drill pressure and increased use of water lubrication will extend drill bit life considerably. 💫【super material 】these diamond drill bits made of vacuum brazed diamond,that is durable and have a long sevice life,which are high quality and good performance that excellent for making clean and accurate hole. 💫【better use advice】dry use,also can be used with water which will help to increase the performance45 degree angle drill positioning before using, and then drilled vertically the rotation speed is about 800~4000 rpm. 💫【ideal application】this diamond coated core drill bit removes a complete circle from glass, marble, tiles,granite, ceramic or otherthey are perfect for drill glass, tile bottles,blocks jars, fiberglass porcelain tile ceramic, slate mable, granite light stone.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
