18 Best and Coolest 2 Clamps

 

Dundas Jafine CHK100ZW Heat Keeper Kit With 2 Clamps

Dundas Jafine CHK100ZW Heat Keeper Kit With 2 Clamps

Dundas Jafine CHK100ZW Heat Keeper Kit With 2 Clamps - Safety valve that helps to eliminate back pressure. This product should not be used with gas clothes dryers. Directs warm, moist air from electric clothes dryers back into your home. The proflex dryer transition duct in this kit is ul approved for safe dryer venting.

 

Blackfire BBM888-2 Clamp Light 100-Lumen  3AAA LED Flashlight

Blackfire BBM888-2 Clamp Light 100-Lumen  3AAA LED Flashlight

Blackfire BBM888-2 Clamp Light 100-Lumen  3AAA LED Flashlight - Features molded from high-impact abs plastic with non-slip tpr over-molds and stainless steel fittings uses a 1-watt cree xr-c led bulb pumps out up to 100 lumens clamps virtually anywhere two axis swivel head direct light to any position shaped like a traditional flashlight for easy portability clamp converts to a stand runs on 3 aaa batteries (not included). Blackfire original clamplight flashlight pumps out a bright 100 lumens hands-free lighting solution this blackfire original clamplight flashlight clips to virtually anything, or can stand on its own. Great for when you’re fixing the car, replacing a fuse, or working under the sink and need both hands free. Order yours today blackfire clamplight original flashlight.

 

iPower  GLDUCT8C Non-Insulated Ducting Aluminum Foil Vent with 2 Clamps 8-Feet 6-Inch ProFlex Clothes Dryer Transition Duct Fire-Resistance Coating Strong Flexible Contains Corrosion Resistant Wire Helix Temperature Range from 0 to 185 F Free Pa

iPower GLDUCT8C Non-Insulated Ducting Aluminum Foil Vent with 2 Clamps, 8-Feet 6-Inch, ProFlex Clothes Dryer Transition Duct, Fire-Resistance Coating. Strong & Flexible, Contains Corrosion Resistant Wire Helix, Temperature Range from 0 to 185+ F, Free Pa

iPower GLDUCT8C Non-Insulated Ducting Aluminum Foil Vent with 2 Clamps, 8-Feet 6-Inch, ProFlex Clothes Dryer Transition Duct, Fire-Resistance Coating. Strong & Flexible, Contains Corrosion Resistant Wire Helix, Temperature Range from 0 to 185+ F, Free Pa - Benefits of air duct helically shaped and internally crimped galvanized steel strip. Strong and flexible. Interlocking steel strips to form an air tight and leak proof system. . 1 year manufacturer warranty. Wide variety of applications hvac, bathroom, greenhouse, grow room, tent and etc. Made from high quality aluminum, not only does the duct act as in intake and exhaust piping for active-cooled fixtures and reflectors, but also stores and dissipates heat at a steady rate, which reduces room temperature fluctuations.

 

SE 326SC6 6-Piece 2-Inch Metal Spring Clamps with Rubber Tips

SE 326SC6 6-Piece 2-Inch Metal Spring Clamps with Rubber Tips

SE 326SC6 6-Piece 2-Inch Metal Spring Clamps with Rubber Tips - . 2-inch clamp with rubber tips 2-inch clamp with rubber tips.

 

Bosch RA1171RA1180RA1181 Routing Table 2 Pack Clamp Knob  2610923280-2pk

Bosch RA1171/RA1180/RA1181 Routing Table (2 Pack) Clamp Knob # 2610923280-2pk

Bosch RA1171/RA1180/RA1181 Routing Table (2 Pack) Clamp Knob # 2610923280-2pk - Includes (2), clamp knob # 2610923283 genuine oem replacement part new, oem bulk packed please refer to list below for compatibility bosch ra1171 (2610930908) routing, ra1180 (2610914514) routing, ra1181 (2610927684) routing, ra1190 (2610914650) routing.

 

Pipe Threader Ratchet Type With 5 Dies  Pipe Cutter  2  Clamp On Pipe Vise 1

Pipe Threader Ratchet Type With 5 Dies + Pipe Cutter # 2 + Clamp On Pipe Vise #1

Pipe Threader Ratchet Type With 5 Dies + Pipe Cutter # 2 + Clamp On Pipe Vise #1 - Pipe threader ratchet type with 5 dies + pipe cutter # 2 + clamp on pipe vise #1 tool kit 1. Alloy steel rollers wheels align for cleaner cuts high grade malleable castings . Type handle plastic carry case . Pipe cutter no 2 pipe diameter capacity from 1/2 up to 2″ hardened”. Pipe threader ratchet type with 5 dies set 3/8“ 1/2“ 3/4“ 1“ 1-1/4“ ratchet.

 

3951449 - FACTORY OEM ORIGINAL WHIRLPOOL KENMORE MAYTAG ROPER TUB TO PUMP HOSE W 2 CLAMPS

3951449 – FACTORY OEM ORIGINAL WHIRLPOOL KENMORE MAYTAG ROPER TUB TO PUMP HOSE W/ 2 CLAMPS

3951449 – FACTORY OEM ORIGINAL WHIRLPOOL KENMORE MAYTAG ROPER TUB TO PUMP HOSE W/ 2 CLAMPS - Factory oem original whirlpool kenmore maytag roper tub to pump hose w/ 2 clamps.

 

Pay Per Foot Aluminum Dryer Duct - 6 Choose From 1to 25long Aluminum Foil Duct Hose with 2 Clamps

Pay Per Foot Aluminum Dryer Duct – 6″ Choose From 1’to 25’long Aluminum Foil Duct Hose with 2 Clamps

Pay Per Foot Aluminum Dryer Duct – 6″ Choose From 1’to 25’long Aluminum Foil Duct Hose with 2 Clamps - Pay per foot aluminum dryer duct, 6″ choose from 1’to 25’long aluminum foil duct hose with 2 clamps. Buy 3 -receive 3 feet of duct with 2 clamps, buy 10 receive 10feet and 2 clamps.

 

Plano PC-1 43-Inch Add-On 2 Clamps 1 Rail

Plano PC-1 43-Inch Add-On (2 Clamps, 1 Rail)

Plano PC-1 43-Inch Add-On (2 Clamps, 1 Rail) - Item number 170699, grading is cover/record vg+/ss using goldmine standards. 196,360 label,inner seal intact please see seller profile for abbreviation descriptions. .

 

JET HD-2T 2-Ton Heavy Duty Beam Clamp

JET HD-2T 2-Ton Heavy Duty Beam Clamp

JET HD-2T 2-Ton Heavy Duty Beam Clamp - To fit a broad range of wide flange h- or standard i-beams specially designed clamp jaw distributes the load away from the beam flange edge low headroom with built-in suspension rod. 2 15/16-8 11/16, material steel, capacity ton 2. Portable, lightweight steel construction allows you to mount hoists or lift beams easily adjustable from 2-15/16 in. To 8-11/16 in. This jet heavy-duty beam clamp with 2-ton capacity is a secure choice for construction and commercial vertical or horizontal rigging operations. Flange width in.

 

Woods 0160 182 SPT-2 Clamp Lamp Light w 55-Inch Reflector 60-Watt 6-Foot Cord

Woods 0160 18/2 SPT-2 Clamp Lamp Light w/ 5.5-Inch Reflector, 60-Watt, 6-Foot Cord

Woods 0160 18/2 SPT-2 Clamp Lamp Light w/ 5.5-Inch Reflector, 60-Watt, 6-Foot Cord - 55-inch adjustable reflector, non-marring clamp grips. On off push through switch with 18 awg 6-foot spt-2 cord and rugged molded-on plug. Lamp with spring clamp provides focused light in areas you need. Works great for painters, garages, workshops, photography, art studios, desks, tables and more. Accepts up to 60-watt bulb medium base bulb (e26).

 

285871 - FACTORY OEM ORIGINAL WHIRLPOOL KENMORE MAYTAG ROPER TUB TO PUMP HOSE W 2 CLAMPS

285871 – FACTORY OEM ORIGINAL WHIRLPOOL KENMORE MAYTAG ROPER TUB TO PUMP HOSE W/ 2 CLAMPS

285871 – FACTORY OEM ORIGINAL WHIRLPOOL KENMORE MAYTAG ROPER TUB TO PUMP HOSE W/ 2 CLAMPS - 285871, factory oem original whirlpool kenmore maytag roper tub to pump hose w/ 2 clamps.

 

Greenlee 624L 2 Clamp Long Cable Pulling Grip

Greenlee 624L 2 Clamp Long Cable Pulling Grip

Greenlee 624L 2 Clamp Long Cable Pulling Grip - Minimum cable diameter is 3/8″. Type of pulls heavy, long runs. 1 lbs. Greenlee 624l specificationsmaximum rated capacity 3,250 lbs. 4 mm) diameter galvanized steel aircraft cable connected to 2 cable receptacles with 5/8″ (15. 8 mm) or larger conduit. 5 kn)weight 2. 9 mm) diameter opening and 2 clamping set screws. (14. (1 kg)greenlee 624l featureslong pulling grip, 2 clamp use to pull in 2″ (50. Type of grip flexible eye 1/4″ (6. Select pulling grips with a maximum rated capacity that meets or exceeds the cable puller’s maximum pulling force.

 

Elecwish 6 X 8Ft Aluminum Flexible Ducting 2 Clamp for Inline Exhaust Fan Duct Insulated Spiral Tube

Elecwish, 6″ X 8Ft Aluminum Flexible Ducting, 2 Clamp for Inline Exhaust Fan Duct, Insulated Spiral Tube

Elecwish, 6″ X 8Ft Aluminum Flexible Ducting, 2 Clamp for Inline Exhaust Fan Duct, Insulated Spiral Tube - Package includes free pair of 6-inch stainless steel bridge clamps. Reinforced double-layer aluminum foil construction,black pvc outer shell for leaking proof. Minimum echoes possible, self-supporting & corrosion resistant. Completely flexible ducting for routine exhausting, can be compressed to a 6″ compact cylinder size. Ideal for hvac, bath and general ventilating applications.

 

Abaco Shc25 - Single Handed Carry Clamps Set Of 2 Clamps

Abaco Shc25 – Single Handed Carry Clamps, Set Of 2 (Clamps)

Abaco Shc25 – Single Handed Carry Clamps, Set Of 2 (Clamps) - Rubber padded jaws are vulcanized to increase grip pressure and protect slabs from scratching. The handle is also rubber padded for added comfort. Single handed carry clamps only require one hand from each person, two men can easily lift and position heavy slabs. . The abaco single handed carry clamps are designed to safely lift and carry stone slabs in an upright position.

 

Jorgensen Size 2 8-12-Inch Handscrews Wood Clamp

Jorgensen Size 2 8-1/2-Inch Handscrews Wood Clamp

Jorgensen Size 2 8-1/2-Inch Handscrews Wood Clamp - The product is manufactured in united states. 1-year limited warranty. Handles provide a comfortable grip. Double-lead threads provide strength and durability. The product is 12″ hand screw clamp. Easy to use. Seasoned maple jaws remain firm and won’t damage your work. Wood clamp to keep your work pieces secure.

 

Builders Best 010131 V430 Readi-Pipe Flexible Semi Rigid Aluminum Dryer Vent Duct 4-inch by 8-foot with 2 Clamps

Builder’s Best 010131 V430 Readi-Pipe Flexible Semi Rigid Aluminum Dryer Vent Duct, 4-inch by 8-foot with 2 Clamps

Builder’s Best 010131 V430 Readi-Pipe Flexible Semi Rigid Aluminum Dryer Vent Duct, 4-inch by 8-foot with 2 Clamps - Performance data pressure rating positive 6″ wc max negative 6″ wc max, maximum velocity 5,000 fpm, temperature range -100Ëšf to +430Ëšf, flame spread 0, smoke developed 0. A typical laundry room uses approximately 8 feet of duct. ” We use 100% aluminum, roll formed with crimp-locked seam. Soft cuff ends make smooth connections to standard 4″ connections. Clothes dryer manufacturers specify “only rigid or flexible metal vent shall be used for exhausting. The v430 readi-pipe dryer vent kit is built in the usa by builder’s best, inc. Each 90 degree turn takes 6 inches of clearance will use up 1 foot of the length of the duct. This v430 readi-pipe kit is designed for use as dryer transition duct, connecting the clothes dryer to the wall outlet. The class 0 non-insulated, non-combustible flexible aluminum air duct stretches to 8 feet. Do not use plastic or metal foil vent. The 2 steel screw clamps are designed to resist stretching and are used to secure dryer and wall connections.

 

Set of 2 12 Inch BAR CLAMPS Heavy Duty Woodworking Wood Carpenter Tools

Set of 2: 12″ Inch BAR CLAMPS Heavy Duty Woodworking Wood Carpenter Tools

Set of 2: 12″ Inch BAR CLAMPS Heavy Duty Woodworking Wood Carpenter Tools - Brand new lot of 2 12″ bar clamps total qty with this auction 2 clamps. Perfect for all of your clamping needs. Adjust from 0″ to 12″. .