18 Most Wanted Micro Tools

 

Richards Micro-Tool Carbide Micro Square Nose End Mill Uncoated Bright Finish 35 Deg Helix 3 Flutes 25 Overall Length 116 Cutting Diameter 18 Shank Diameter

Richards Micro-Tool Carbide Micro Square Nose End Mill, Uncoated (Bright) Finish, 35 Deg Helix, 3 Flutes, 2.5″ Overall Length, 1/16″ Cutting Diameter, 1/8″ Shank Diameter

Richards Micro-Tool Carbide Micro Square Nose End Mill, Uncoated (Bright) Finish, 35 Deg Helix, 3 Flutes, 2.5″ Overall Length, 1/16″ Cutting Diameter, 1/8″ Shank Diameter - 1/16″ diameter. Number of flute, 3. 125″ shank diameter. 500″ flute length. 250″ over all length.

 

Smiths DBSF115 11-12-Inch FINE Diamond Bench Stone wMicro Tool Sharpening Pad

Smith’s DBSF115 11-1/2-Inch FINE Diamond Bench Stone w/Micro Tool Sharpening Pad

Smith’s DBSF115 11-1/2-Inch FINE Diamond Bench Stone w/Micro Tool Sharpening Pad - For a diamond stone to finish your edge, choose fine (orange-750 grit). Molded plastic base with non-slip rubber feet for safety clear, plastic lid to protect the stone. Micro-tool sharpening pad for small tools. For a diamond stone to set your edge, choose coarse (yellow-325 grit). One-sided sharpening stone offered in two grits coarse or fine.

 

Richards Micro-Tool Carbide Micro Square Nose End Mill Uncoated Bright Finish 30 Deg Helix 2 Flutes 15 Overall Length 002 Cutting Diameter 18 Shank Diameter

Richards Micro-Tool Carbide Micro Square Nose End Mill, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 1.5″ Overall Length, 0.02″ Cutting Diameter, 1/8″ Shank Diameter

Richards Micro-Tool Carbide Micro Square Nose End Mill, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 1.5″ Overall Length, 0.02″ Cutting Diameter, 1/8″ Shank Diameter - Number of flutes, 2. 0020″ diameter. 150″ overall length.

 

Richards Micro-Tool Carbide Square Nose End Mill Diamond-Like Finish 35 Deg Helix 4 Flutes 3 Overall Length 316 Cutting Diameter 316 Shank Diameter

Richards Micro-Tool Carbide Square Nose End Mill, Diamond-Like Finish, 35 Deg Helix, 4 Flutes, 3″ Overall Length, 3/16″ Cutting Diameter, 3/16″ Shank Diameter

Richards Micro-Tool Carbide Square Nose End Mill, Diamond-Like Finish, 35 Deg Helix, 4 Flutes, 3″ Overall Length, 3/16″ Cutting Diameter, 3/16″ Shank Diameter - Ad (amorphous diamond) coated “g” mills are specifically designed for machining graphite electrodes. Diamond coatings provide extreme wear resistance, making them ideal for machining abrasive non-metals such as ceramic, fiberglass, plastics, and composites not for use machining metal. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.

 

Gerber 31-001040 Dime Micro Tool

Gerber 31-001040 Dime Micro Tool

Gerber 31-001040 Dime Micro Tool - Gerber took the standard keychain multi-tool and made it better. Compact and lightweight, the dime is the most valuable change you’ll find in your pocket. In addition to stainless steel pliers, wire cutters, a fine edge blade, spring-loaded scissors, flathead screwdriver, crosshead driver, tweezers and file, the dime includes a unique blade designed to safely cut and score plastic packaging and a bottle opener that is exposed even when the tool is closed. Imported. Gerber dime multi-tool.

 

True Utility TU42 Stainless Steel Micro Tool Miniature Multi Tool

True Utility TU42 Stainless Steel Micro Tool Miniature Multi Tool

True Utility TU42 Stainless Steel Micro Tool Miniature Multi Tool - These 6 essential tools are kept covered and protects by a built in cover to keep secure. 4″high. 2. 4″wide x. ) This tiny tool is bursting with essentials it includes super sharp scissors, knife, bottle opener, screwdriver, nail file and nail cleaner. True utility is based in bournemouth, england. The body of this tool also works as a handle for many of the tools included. Mango tu42 true utility stainless steel micro tool miniature multi tool, a small strong stainless steel multi-tool. 2″ long x. A quick release cleverclip is also included to make sure the tools are easily accessible at all times. The microtool is a fully functional set of key-ring tools crammed into a tiny 45mm frame. With accomplished designs that are original from idea to end result, founder lee berman has designed inspiring products to de-clutter pockets, arming people with contemporary, minimalist and practical pocket tools. (That�s smaller than your door key. Since its foundation in 2000, true utility has delivered the highest standards in product design, customer service and ongoing brand development.

 

Flexcut 90 Degree Parting Micro Tool Set MT800

Flexcut 90 Degree Parting Micro Tool Set, MT800

Flexcut 90 Degree Parting Micro Tool Set, MT800 - Set contains 4 tools 1. Flexcut’s micro tool sets are crafted in the usa from the same tool steel as flexcut’s bigger tools, but they are much smaller, the new standard for micro tools. There are nine sets, eight four-piece profile sets and one mixed profile set. All are easily sharpened on flexcut’s strops (sold separately) and feature handles designed to provide the secure but relaxed grip so necessary when doing detailed work. Overall tool length is 5-1/2″. Handles are 3-7/8″ long, with a 1″ blade. Flexcut 90° v-parting is the broadest of the v tools designed for broad corners and deep cut when carving fine details such as hair, feathers, fur, mouths and eyes just got a lot easier. 5mm, 2mm, 3mm and 4mm.

 

Richards Micro-Tool Carbide Micro Square Nose End Mill Diamond-Like Finish 35 Deg Helix 3 Flutes 25 Overall Length 116 Cutting Diameter 18 Shank Diameter

Richards Micro-Tool Carbide Micro Square Nose End Mill, Diamond-Like Finish, 35 Deg Helix, 3 Flutes, 2.5″ Overall Length, 1/16″ Cutting Diameter, 1/8″ Shank Diameter

Richards Micro-Tool Carbide Micro Square Nose End Mill, Diamond-Like Finish, 35 Deg Helix, 3 Flutes, 2.5″ Overall Length, 1/16″ Cutting Diameter, 1/8″ Shank Diameter - Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Diamond coatings provide extreme wear resistance, making them ideal for machining abrasive non-metals such as ceramic, fiberglass, plastics, and composites not for use machining metal. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Ad (amorphous diamond) coated “g” mills are specifically designed for machining graphite electrodes.

 

Richards Micro-Tool Carbide Ball Nose End Mill Diamond-Like Finish 35 Deg Helix 3 Flutes 3 Overall Length 18 Cutting Diameter 18 Shank Diameter

Richards Micro-Tool Carbide Ball Nose End Mill, Diamond-Like Finish, 35 Deg Helix, 3 Flutes, 3″ Overall Length, 1/8″ Cutting Diameter, 1/8″ Shank Diameter

Richards Micro-Tool Carbide Ball Nose End Mill, Diamond-Like Finish, 35 Deg Helix, 3 Flutes, 3″ Overall Length, 1/8″ Cutting Diameter, 1/8″ Shank Diameter - Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Diamond coatings provide extreme wear resistance, making them ideal for machining abrasive non-metals such as ceramic, fiberglass, plastics, and composites not for use machining metal. Ad (amorphous diamond) coated “g” mills are specifically designed for machining graphite electrodes. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems.

 

Richards Micro-Tool Carbide Micro Ball Nose End Mill Diamond-Like Finish 35 Deg Helix 3 Flutes 25 Overall Length 164 Cutting Diameter 18 Shank Diameter

Richards Micro-Tool Carbide Micro Ball Nose End Mill, Diamond-Like Finish, 35 Deg Helix, 3 Flutes, 2.5″ Overall Length, 1/64″ Cutting Diameter, 1/8″ Shank Diameter

Richards Micro-Tool Carbide Micro Ball Nose End Mill, Diamond-Like Finish, 35 Deg Helix, 3 Flutes, 2.5″ Overall Length, 1/64″ Cutting Diameter, 1/8″ Shank Diameter - Round shanks allow use with a wide variety of toolholding systems. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Ad (amorphous diamond) coated “g” mills are specifically designed for machining graphite electrodes. Diamond coatings provide extreme wear resistance, making them ideal for machining abrasive non-metals such as ceramic, fiberglass, plastics, and composites not for use machining metal. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

 

Richards Micro-Tool Carbide Micro Ball Nose End Mill Diamond-Like Finish 35 Deg Helix 3 Flutes 25 Overall Length 116 Cutting Diameter 18 Shank Diameter

Richards Micro-Tool Carbide Micro Ball Nose End Mill, Diamond-Like Finish, 35 Deg Helix, 3 Flutes, 2.5″ Overall Length, 1/16″ Cutting Diameter, 1/8″ Shank Diameter

Richards Micro-Tool Carbide Micro Ball Nose End Mill, Diamond-Like Finish, 35 Deg Helix, 3 Flutes, 2.5″ Overall Length, 1/16″ Cutting Diameter, 1/8″ Shank Diameter - Diamond coatings provide extreme wear resistance, making them ideal for machining abrasive non-metals such as ceramic, fiberglass, plastics, and composites not for use machining metal. Ad (amorphous diamond) coated “g” mills are specifically designed for machining graphite electrodes. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.

 

Richards Micro-Tool Carbide Micro Square Nose End Mill Diamond-Like Finish 30 Deg Helix 4 Flutes 15 Overall Length 364 Cutting Diameter 18 Shank Diameter

Richards Micro-Tool Carbide Micro Square Nose End Mill, Diamond-Like Finish, 30 Deg Helix, 4 Flutes, 1.5″ Overall Length, 3/64″ Cutting Diameter, 1/8″ Shank Diameter

Richards Micro-Tool Carbide Micro Square Nose End Mill, Diamond-Like Finish, 30 Deg Helix, 4 Flutes, 1.5″ Overall Length, 3/64″ Cutting Diameter, 1/8″ Shank Diameter - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Round shanks allow use with a wide variety of toolholding systems. Amorphous diamond (ad coating) is a smooth, hard, thin film coating used primarily for machining graphite and non-ferrous materials. Diamond coatings provide extreme wear resistance, making them ideal for machining abrasive non-metals such as ceramic, fiberglass, plastics, and composites not for use machining metal.

 

42 Piece Ultra Electronic Tool Set w Uber Thin Pry Tool 28 Bit Screwdriver Kit  Spudgers Tweezers Suction Cup More DIY iPhone Macbook Air Pro MiniMicro Phillips Torx Pentalobe Y Hex

42 Piece Ultra Electronic Tool Set w/ Uber Thin Pry Tool: 28 Bit Screwdriver Kit + Spudgers, Tweezers, Suction Cup & More, DIY iPhone Macbook Air & Pro, Mini/Micro Phillips Torx Pentalobe Y Hex

42 Piece Ultra Electronic Tool Set w/ Uber Thin Pry Tool: 28 Bit Screwdriver Kit + Spudgers, Tweezers, Suction Cup & More, DIY iPhone Macbook Air & Pro, Mini/Micro Phillips Torx Pentalobe Y Hex - Quality mini/micro tool kit has what you need for almost any small electronics repair. 28 tip mini/micro screwdriver set included with all the sizes for iphone, galaxy, most any project. Also has spudger pry tools, everything you need to repair your cell phones, tablet, game and others. Includes incredibly thin metal pry tool ideal for opening phones, tablets, laptops & more. Diy nintendo gamecube, nintendo game boy advance sp, sanyo & kyocera cell phones, fuji cameras.

 

Streamworks Micro Tool Kit I

Streamworks Micro Tool Kit I

Streamworks Micro Tool Kit I - . Ideal for wade fishing where size and storage is limited and convenience is required. Micro tool kit i carries all of the essential fly fishing accessories in a very small package.

 

True Utility TU242 Micro Tool

True Utility TU242 Micro Tool

True Utility TU242 Micro Tool - The micro tool is a fully functional set of key ring tools crammed into a tiny 1. That’s smaller than a door key this tiny tool is bursting with essentials -super-sharp scissors and knife, bottle opener, screwdriver, file and nail cleaner. 75″ frame.

 

Gerber 30-000468 Micro Tool Green

Gerber 30-000468 Micro Tool, Green

Gerber 30-000468 Micro Tool, Green - In addition to stainless steel pliers, wire cutters, a fine edge blade, spring-loaded scissors, flathead screwdriver, crosshead driver, tweezers and file, the dime includes a unique blade designed to safely cut and score plastic packaging and a bottle opener that is exposed even when the tool is closed. Compact and lightweight, the dime is the most valuable change you’ll find in your pocket. We took the standard keychain multi-tool and made it better.

 

SwissTech ST67129 Micro Wrench Multitool for Keychain Auto Camping Hardware Polished Stainless Steel

Swiss+Tech ST67129 Micro Wrench Multitool for Keychain Auto Camping Hardware, Polished Stainless Steel

Swiss+Tech ST67129 Micro Wrench Multitool for Keychain Auto Camping Hardware, Polished Stainless Steel - Precision-crafted micro tool flat wrench with a micro-slim, heavy-duty design for key ring or carabiner. Made of solid stainless steel. One year limited warranty. A nail puller or pry bar, metric ruler and flathead screwdriver are great for small repairs or projects. Features 10 wrench sizes, including 55mm, 7mm, 8mm, 10mm, 13mm, 14mm, ¼” wrench and hex driver, 3/8″ wrench and 2 spoke wrenches.

 

Richards Micro-Tool Carbide Micro Square Nose End Mill Uncoated Bright Finish 35 Deg Helix 3 Flutes 25 Overall Length 132 Cutting Diameter 14 Shank Diameter

Richards Micro-Tool Carbide Micro Square Nose End Mill, Uncoated (Bright) Finish, 35 Deg Helix, 3 Flutes, 2.5″ Overall Length, 1/32″ Cutting Diameter, 1/4″ Shank Diameter

Richards Micro-Tool Carbide Micro Square Nose End Mill, Uncoated (Bright) Finish, 35 Deg Helix, 3 Flutes, 2.5″ Overall Length, 1/32″ Cutting Diameter, 1/4″ Shank Diameter - Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. General purpose cut. Round shanks allow use with a wide variety of toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.