1-72, HSS Thread Forming Taps, Bottom Style, TiN Coated
- 1-72h2 (gh limit) 1 lube groove, taps hss/thread forming bottoming tin coated.
Morse Cutting Tools 36352 Thread Forming Taps, High-Speed Steel, Bright Finish, Plug Style, D7 Pitch Diameter Limit, M5 x 0.80 Size
- Thread forming taps cold form rather than cut the threads. Advantages include no chips to dispose of, stronger higher quality threads, increased tapping speeds, longer tap life and reduced tap breakage. Lube grooves provide a path for lubrication and act as vents to relieve pressure in blind hole tapping. Recommended for a wide variety of ductile materials.
Dormer E099 Powdered Metal Thread Forming Tap, Coolant-Through, TiN Coated, Round Shank With Square End, Modified Bottoming Chamfer, M5-0.80 Thread Size
- Powdered-metal steel for performance approaching that of solid carbide tools, with the toughness and shock-resistance of high-speed steel. Thread forming tap cold-forms threads in through holes and blind holes without producing chips. Modified bottoming chamfer has additional length to reduce chip load, add tool life, and permit higher tapping speeds. Coolant-through channel with radial outlet and external grooves for improved lubricant flow. Titanium nitride (tin) coating for extended tool life and faster cutting speeds than with uncoated tools.
Kodiak Cutting Tools KCT209713 USA Made Roll Thread Forming Threading Tap, Bottom Style, TiN Coated, High Speed Steel, H2 Limit, 2-56 Size
- 2-56 thread forming tap. 141″ shank 7/16 thread length 1-3/4″ overall length h2 limit thread forming roll threading tap. .
BALAX – 3237485 – #12 X 24 NC BH2 THREAD FORMING TAP MADE IN USA
- These taps are made in the usa and their fluteless design allows high quality threads, faster tapping speeds, higher production and generates no chips, which simplifies tapping of blind bottoming holes where threads can be formed the full depth of the hole. Thread size can be closely maintained. Taps have no flutes except as optionally designed with one or more lubrication grooves. Thread form is lobed so there is a finite number of points contacting the work. This tap forms threads, so it is chipless and will not cause a chip problem.
Union Butterfield 3306E(UNC) High-Speed Steel Thread Forming Tap, Extra-Long, Uncoated (Bright) Finish, Round Shank With Square End, Bottoming Chamfer, H4 Tolerance, 4″ O’all Length, 1/4″-20 Thread Size
- Bottoming chamfer for threading the bottoms of blind holes. High-speed steel for compatibility with a variety of materials. Available in unc (unified coarse) or unf (unified fine) right-hand thread options for different applications. Cold-forms threads in through holes and blind holes without producing chips. Extension rol-form tap is extra-long for extended reach, with lubricant grooves to improve coolant flow.
Dormer E064 Powdered Metal Thread Forming Tap, Gold Oxide Finish, Round Shank With Square End, Modified Bottoming Chamfer, #6-32 Thread Size
- Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools performance is similar to uncoated tools. Powdered metal substrate offers superior performance that approaches that of solid carbide tools but with the toughness and shock-reistance of high-speed steel.
Morse Cutting Tools 36452 Thread Forming Taps, High-Speed Steel, Bright Finish, Bottom Style, D7 Pitch Diameter Limit, M5 x 0.80 Size
- . Recommended for a wide variety of ductile materials. Advantages include no chips to dispose of, stronger higher quality threads, increased tapping speeds, longer tap life and reduced tap breakage. Thread forming taps cold form rather than cut the threads. Lube grooves provide a path for lubrication and act as vents to relieve pressure in blind hole tapping.
Union Butterfield 3306E(UNC) High-Speed Steel Thread Forming Tap, Extra-Long, Uncoated (Bright) Finish, Round Shank With Square End, Bottoming Chamfer, H5 Tolerance, 6 O’all Length, 3/8-16 Thread Size Size: 3/8-16, Model: 1321092
- Available in unc (unified coarse) or unf (unified fine) right-hand thread options for different. Cold-forms threads in through holes and blind holes without producing chips. High-speed steel for compatibility with a variety of materials. Extension rol-form tap is extra-long for extended reach, with lubricant grooves to improve coolant. Bottoming chamfer for threading the bottoms of blind holes.
Titan TT92808 High Speed Steel Thread Forming Bottom Tap, TIN Coated, 2″ – 56″, H2 Limit, 0.141″ Shank Diameter, 7/16″ Thread Length, 1-3/4″ Overall Length
- . Ductile materials producing stringy chips are a good candidate for forming. Features include “lube grooves” for lubrication and venting in blind holes, and a tool life 3-4 times (or more) than cutting taps. Thread forming taps have no flutes or cutting edges and provide chipless tapping. For use with brass, copper, lead, stainless steels, carbon steel and leaded steel and zinc.
Thread Forming Tap, Mbot, TiCN, 1/4-20, H3
- Ideal for forming internal threads in aluminum, carbon, alloy, die and stainless steels, standards 14001. It is made of cobalt material, finish ticn, size 1/4″, pitch 20, thread unc, pitch diameter limit is h3, standard projection, shank diameter is 0. This thread forming tap comes with modified bottoming type and general purpose style. . 255″.
Dormer Applix 1681AP High Speed Steel High Performance Thread Forming Multi-Application Lube Grooves Taps, TiN Coated, Round with Square End, Single-End, Semi Bottom, 1/2″ Size, 13 UNC TPI
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Round shanks with square end allow use with a wide variety of toolholding systems. Single end. Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction.
Morse Cutting Tools 36455 Thread Forming Taps, High-Speed Steel, Bright Finish, Bottom Style, D10 Pitch Diameter Limit, M10 x 1.50 Size
- Recommended for a wide variety of ductile materials. Lube grooves provide a path for lubrication and act as vents to relieve pressure in blind hole tapping. Advantages include no chips to dispose of, stronger higher quality threads, increased tapping speeds, longer tap life and reduced tap breakage. Thread forming taps cold form rather than cut the threads.
Thread Forming Tap, Plug, 1/4-28, NF
- 625 in overall length 2. Gtd 17030 thread forming tap plug tap style general purpose vanadium high speed steel uncoated finish size 1/4 pitch 28 nf/unf thread length 0. 375 in use to produce threads by displacing metal instead of removing tolerance 3b ansi standards. 50 in 3-5 pitches pitch diameter limits h4 shank dia 0. 255 in neck length 0.
North American Tool 19210 HSS Thread Forming Tap, Uncoated Bright Finish, Plug Chamfer, 6-1 M Thread Type, 2.5″ Length
- These taps are made in the usa and their fluteless design allows high quality threads, faster tapping speeds, higher production and generates no chips, which simplifies tapping of blind bottoming holes where threads can be formed the full depth of the hole. Taps have no flutes except as optionally designed with one or more lubrication grooves. Thread form is lobed so there is a finite number of points contacting the work. This tap forms threads, so it is chipless and will not cause a chip problem. Thread size can be closely maintained.
North American Tool 19224 HSS Thread Forming Tap, Uncoated Bright Finish, Plug Chamfer, 12-1.25 M Thread Type, 3.38″ Length
- Thread size can be closely maintained. Taps have no flutes except as optionally designed with one or more lubrication grooves. These taps are made in the usa and their fluteless design allows high quality threads, faster tapping speeds, higher production and generates no chips, which simplifies tapping of blind bottoming holes where threads can be formed the full depth of the hole. Thread form is lobed so there is a finite number of points contacting the work. This tap forms threads, so it is chipless and will not cause a chip problem.
Morse Cutting Tools 36411 Thread Forming Taps, High-Speed Steel, Bright Finish, Bottoming Style, H6 Pitch Diameter Limit, 1/4″-20″ Size
- Advantages include no chips to dispose of, stronger higher quality threads, increased tapping speeds, longer tap life and reduced tap breakage. Lube grooves provide a path for lubrication and act as vents to relieve pressure in blind hole tapping. Thread forming taps cold form rather than cut the threads. Recommended for a wide variety of ductile materials.
Titan TT92871 High Speed Steel Thread Forming Plug Tap, TIN Coated, 1/4″ – 20″, H3 Limit, 0.255″ Shank Diameter, 1″ Thread Length, 2-1/2″ Overall Length
- Thread forming taps have no flutes or cutting edges and provide chipless tapping. Ductile materials producing stringy chips are a good candidate for forming. For use with brass, copper, lead, stainless steels, carbon steel and leaded steel and zinc. Features include “lube grooves” for lubrication and venting in blind holes, and a tool life 3-4 times (or more) than cutting taps.
Union Butterfield 1580(UNC) High-Speed Steel Thread Forming Flute Tap, Uncoated (Bright) Finish, Round Shank With Square End, Bottoming Chamfer, H2 Tolerance, #2-56 Thread Size
- High-speed steel for compatibility with a variety of materials. Round shank with square end helps to minimize rotation in the tool holder. Spiral forming lobe pattern for reducing tapping torque. Available in unc (unified coarse) or unf (unified fine) right-hand thread options for different applications. Cold-forms threads in through holes and blind holes without producing chips.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
