Amana Tool 51470-Z SC Spiral O Single Flute, Aluminum Cutting 1/16 D x 1/4 CH x 1/8 SHK x 1-1/2 Inch Long Up-Cut ZrN Coated Router Bit with Mirror Finish
- Aluminum cutting router bits by amana feature outstanding tool longevity, a tendency to stay sharper, mirror like carbide finish, excellent carbide brazing, a broad selection of sizes and most importantly quality of cut. Amana tool 51470-z sc spiral ‘o’ single flute, aluminum cutting 1/16 d x 1/4 ch x 1/8 shk x 1-1/2 inch long up-cut zrn coated router bit with mirror finish uses the highest quality sub-micrograin carbide, has a special proprietary edge processing system and features a super high polished cutting edge with a unique mirror finish, resulting in clean cuts, less chance for chip re-welding, a superior surface finish and a longer tool life. Excellent for alpolic copper composite material (ccm), alucobond, aluminum, aluminum 5052, aluminum 6061, aluminum alloys (al-alloy), aluminum composite materials (acm), aluminum composite panel (acp), alupanel, brass, copper, dibond, durabond, e-panel, etalbond, fomex with aluminum face, gold, non-ferrous metals, plastic, silver, solid surface, titanium composite material (tcm), wood. Industrial quality aluminum cutting router bits are made by amana tool, the leading manufacturers of cutting tools. The spiral o flute sharpening/finishing process increases feed rates, allowing for more linear feet routed in less time. Specifications direction up-cut (d) diameter 1/16 (b) cutting height 1/4 (d) shank 1/8 overall length (l) 1-1/2 flutes 1 surface coating zrn.
Amana Tool 51779-Z SC Spiral O Single Flute, Aluminum Cutting 3/16 D x 7/8 CH x 1/4 SHK x 2-1/2 Inch Long Down-Cut ZrN Coated Router Bit with Mirror Finish
- Amana tool 51508-z sc spiral ‘o’ single flute, aluminum cutting 3/16 d x 1/2 ch x 1/4 shk x 2 inch long down-cut zrn coated router bit with mirror finish uses the highest quality sub-micrograin carbide, have a special proprietary edge processing system and feature a super high polished cutting edge with a unique mirror finish, resulting in clean cuts, less chance for chip re-welding, a superior surface finish and a longer tool life. Specifications direction down-cut (d) diameter 3/16 (b) cutting height 1/2 (d) shank 1/4 overall length (l) 2 flutes 1. Industrial quality aluminum cutting router bits are made by amana tool, the leading manufacturers of cutting tools. Aluminum cutting router bits by amana feature outstanding tool longevity, a tendency to stay sharper, mirror like carbide finish, excellent carbide brazing, a broad selection of sizes and most importantly quality of cut. Excellent for alpolic copper composite material (ccm), alucobond, aluminum, aluminum 5052, aluminum 6061, aluminum alloys (al-alloy), aluminum composite materials (acm), aluminum composite panel (acp), alupanel, brass, copper, dibond, durabond, e-panel, etalbond, fomex with aluminum face, gold, non-ferrous metals, plastic, silver, solid surface, titanium composite material (tcm), wood.
LMT Onsrud 63-776 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter
- Round shanks allow use with a wide variety of toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Single flute, 21 degree angle.
Amana Tool – 51405-K Solid Carbide CNC Spektra Extreme Tool Life Coated Spiral ‘O’ Flute
- Right hand helix right hand cut, #51405-k, direction up-cut, (d) diameter 1/4, (b) cutting height 1, (d) shank 1/4, overall length (l) 2-1/2, type naco ceramic coating, flutes 1, 51405-k solid carbide cnc spektra extreme tool life coated spiral ‘o’ flute, plastic cutting 1/4 dia x 1 x 1/4 inch shank up-cut router bit. To be used only on cnc machines and routers with automatic feeding. Ideal for industrial applications and cnc machines. Bits are made according to strict tolerances from an exclusive carbide grade and polished to a mirror finish using amana’s unique process. Designed to eject chips up. Produce super clean, smooth cuts especially in acrylic materials (plexiglas lucite) other plastics and wood.
LMT Onsrud 62-719 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.1875″ Cutting Diameter, 0.1875″ Shank Diameter
- 3/16 in. , Length of cut 5/8 in. , shank dia. , Application routing plastic, number of flutes 1. , Overall length 2 in. , Helix angle 21 deg. 3/16 in. Routing end mill, list number 62-719, end square, end style square, cutting type center, dia.
Amana Tool – 51474 Solid Carbide CNC Spiral ‘O’ Single Flute, Aluminum Cutting 1/8 Dia x 1
- Right hand helix right hand cut, #51474, direction up-cut, (d) diameter 1/8, (b) cutting height 1/4, (d) shank 1/4, overall length (l) 2, flutes 1, 51474 solid carbide cnc spiral ‘o’ single flute, aluminum cutting 1/8 dia x 1/4 x 1/4 shank x 2 inch long up-cut router bit. To be used only on cnc machines and routers with automatic feeding. Using the highest quality sub-micrograin carbide these bits have a special proprietary edge processing system featuring a super high polished cutting edge with a unique “mirror finish” resulting in clean cuts, less chance for chip re-welding, a superior surface finish and a longer tool life.
Amana Tool – 51497 Metric Solid Carbide CNC Spiral ‘O’ Single Flute, Plastic Cutting 6 Dia
- Produce super clean, smooth cuts especially in acrylic materials (plexiglas lucite) other plastics and wood. Ideal for industrial applications and cnc machines. Designed to eject chips up. To be used only on cnc machines and routers with automatic feeding. Bits are made according to strict tolerances from an exclusive carbide grade and polished to a mirror finish using amana’s unique process. Right hand helix right hand cut. , #51497, direction up-cut, (d) diameter 6mm, (b) cutting height 30mm, (d) shank 6mm, overall length (l) 75mm, flutes 1, 51497 metric solid carbide cnc spiral ‘o’ single flute, plastic cutting 6 dia x 30 x 6 shank x 75mm long up-cut router bit.
LMT Onsrud 63-726 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter
- Round shanks allow use with a wide variety of toolholding systems. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Single flute, 21 degree angle. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
LMT Onsrud 63-610 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.1250″ Cutting Diameter, 0.2500″ Shank Diameter
- Single flute, 22 degree angle. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.
LMT Onsrud 63-602 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 1 Flute, 1.5000″ Overall Length, 0.0625″ Cutting Diameter, 0.1250″ Shank Diameter
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Single flute, 22 degree angle. Round shanks allow use with a wide variety of toolholding systems. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
LMT Onsrud 62-713 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.1250″ Cutting Diameter, 0.1250″ Shank Diameter
- Round shanks allow use with a wide variety of toolholding systems. One flute, 21 degree angle. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
Amana Tool – 51414-K Solid Carbide CNC Spektra Extreme Tool Life Coated Spiral ‘O’ Flute
- Designed to eject chips up. Ideal for industrial applications and cnc machines. Bits are made according to strict tolerances from an exclusive carbide grade and polished to a mirror finish using amana’s unique process. Produce super clean, smooth cuts especially in acrylic materials (plexiglas lucite) other plastics and wood. To be used only on cnc machines and routers with automatic feeding. Right hand helix right hand cut, #51414-k, direction up-cut, (d) diameter 3/8, (b) cutting height 1-1/8, (d) shank 3/8, overall length (l) 3, type naco ceramic coating, flutes 1, 51414-k solid carbide cnc spektra extreme tool life coated spiral ‘o’ flute, plastic cutting 3/8 dia x 1-1/8 x 3/8 inch shank up-cut router bit.
LMT Onsrud 52-706 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 2 Flutes, 4.0000″ Overall Length, 0.5000″ Cutting Diameter, 0.5000″ Shank Diameter
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Double flute, 22 degree angle. Round shanks allow use with a wide variety of toolholding systems. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.
Amana Tool – 51413-K Solid Carbide CNC Spektra Extreme Tool Life Coated Spiral ‘O’ Flute
- Ideal for industrial applications and cnc machines. To be used only on cnc machines and routers with automatic feeding. Designed to eject chips up. Produce super clean, smooth cuts especially in acrylic materials (plexiglas lucite) other plastics and wood. Bits are made according to strict tolerances from an exclusive carbide grade and polished to a mirror finish using amana’s unique process. Right hand helix right hand cut, #51413-k, direction up-cut, (d) diameter 1/4, (b) cutting height 1-1/2, (d) shank 1/4, overall length (l) 3, type naco ceramic coating, flutes 1, 51413-k solid carbide cnc spektra extreme tool life coated spiral ‘o’ flute, plastic cutting 1/4 dia x 1-1/2 x 1/4 inch shank up-cut router bit.
Amana Tool – 51470 Solid Carbide CNC Spiral ‘O’ Single Flute, Aluminum Cutting 1/16 Dia x
- Right hand helix right hand cut. Using the highest quality sub-micrograin carbide these bits have a special proprietary edge processing system featuring a super high polished cutting edge with a unique “mirror finish” resulting in clean cuts, less chance for chip re-welding, a superior surface finish and a longer tool life. , #51470, direction up-cut, (d) diameter 1/16, (b) cutting height 1/4, (d) shank 1/8, overall length (l) 1-1/2, flutes 1, 51470 solid carbide cnc spiral ‘o’ single flute, aluminum cutting 1/16 dia x 1/4 x 1/8 shank x 1-1/2 inch long up-cut router bit. To be used only on cnc machines and routers with automatic feeding.
Amana Tool AMS-165-K 8-Pc CNC Spektra Extreme Tool Life Coated Plastic Cutting Solid Carbide Spiral O Flute 1/4 SHK Router Bit Collection
- Specifications (d) shank 1/4. Solid carbide. Advantages of spektra coating naco coating is a micro-thin ceramic coating which enables the tool’s cutting edge to retain crucial sharpness and lubricity this provides longevity and produces cutting results of the highest quality coatings prevents high heat and oxidation which is detrimental to cutting tool performance multi-colored hues, while attractive, will dissipate upon use and yet coating will remain fully effective naco offers approximately 4,500 vickers for impressive solid hardne. Made in usa.
LMT Onsrud 63-775 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.5000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Single flute, 21 degree angle. Round shanks allow use with a wide variety of toolholding systems.
Amana Tool – 51407-K Solid Carbide CNC Spektra Extreme Tool Life Coated Spiral ‘O’ Flute
- Designed to eject chips up. Ideal for industrial applications and cnc machines. To be used only on cnc machines and routers with automatic feeding. Bits are made according to strict tolerances from an exclusive carbide grade and polished to a mirror finish using amana’s unique process. Right hand helix right hand cut, #51407-k, direction up-cut, (d) diameter 1/4, (b) cutting height 1-1/4, (d) shank 1/4, overall length (l) 3, type naco ceramic coating, flutes 1, 51407-k solid carbide cnc spektra extreme tool life coated spiral ‘o’ flute, plastic cutting 1/4 dia x 1-1/4 x 1/4 inch shank up-cut router bit. Produce super clean, smooth cuts especially in acrylic materials (plexiglas lucite) other plastics and wood.
LMT Onsrud 62-725 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.5000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter
- Routing end mill, downcut spiral o-flute, high performance, number of flutes 1, single end, plunge point end style, center cutting type, right hand cut, carbide, uncoated finish, dia 1/4 in, shank dia 1/4 in, length of cut 3/4 in, overall length 2 1/2 in, cut angle 21 deg, helix angle 21 deg, for cast acrylic, nylon, pvc.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
