Drillco 2700E Series Carbon Steel Tap, Uncoated (Bright) Finish, Round Shank with Square End, Pipe Chamfer, 1/4″-18 Size
- Made of carbon steel. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Comes with round with square end shank. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts.
Drillco 2900 Series High-Speed Steel Tap, Uncoated (Bright) Finish, Round Shank with Square End, Pipe Chamfer, 4″-8 Size
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts. Comes with round with square end shank.
Drillco 2700E Series Carbon Steel Tap, Uncoated (Bright) Finish, Round Shank with Square End, Pipe Chamfer, 1/8″-27 Size
- Made of carbon steel. Comes with round with square end shank. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts.
Drillco 2930 Series High-Speed Steel Tap, Uncoated (Bright) Finish, Round Shank with Square End, Pipe Chamfer, 1/4″-18 Size
- Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Comes with round with square end shank.
Drillco 2900 Series High-Speed Steel Tap, Uncoated (Bright) Finish, Round Shank with Square End, Pipe Chamfer, 3″-8 Size
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Comes with round with square end shank. Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts.
Drillco 2930 Series High-Speed Steel Tap, Uncoated (Bright) Finish, Round Shank with Square End, Pipe Chamfer, 1/8″-27 Size
- Comes with round with square end shank. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts.
Drillco 2900 Series High-Speed Steel Tap, Uncoated (Bright) Finish, Round Shank with Square End, Pipe Chamfer, 2-1/2″-8 Size
- Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Comes with round with square end shank.
Drillco 2950 Series High-Speed Steel Tap, Uncoated (Bright) Finish, Round Shank with Square End, Pipe Chamfer, 1/8″-27 Size
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Comes with round with square end shank.
Drillco 2700E Series Carbon Steel Tap, Uncoated (Bright) Finish, Round Shank with Square End, Pipe Chamfer, 1/2-14 Size, Model: 2.7E+135
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most. Comes with round with square end shank. Made of carbon steel.
Drillco 2700E Series Carbon Steel Tap, Uncoated (Bright) Finish, Round Shank with Square End, Pipe Chamfer, 1/2″-14 Size
- Made of carbon steel. Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts. Comes with round with square end shank. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction.
Drillco 2700E Series Carbon Steel Tap, Uncoated (Bright) Finish, Round Shank with Square End, Pipe Chamfer, 2″-11-1/2 Size
- Made of carbon steel. Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts. Comes with round with square end shank. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
Drillco 2950 Series High-Speed Steel Tap, Uncoated (Bright) Finish, Round Shank with Square End, Pipe Chamfer, 1/4″-18 Size
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Comes with round with square end shank. Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction.
Drillco 2950 Series High-Speed Steel Tap, Uncoated (Bright) Finish, Round Shank with Square End, Pipe Chamfer, 1/2″-14 Size
- Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Comes with round with square end shank.
Drillco 2930 Series High-Speed Steel Tap, Uncoated (Bright) Finish, Round Shank with Square End, Pipe Chamfer, 1″-11-1/2 Size
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Comes with round with square end shank.
Drillco 2700E Series Carbon Steel Tap, Uncoated (Bright) Finish, Round Shank with Square End, Pipe Chamfer, 1″-11-1/2 Size
- Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Made of carbon steel. Comes with round with square end shank. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction.
Drillco 2900E Series High-Speed Steel Tap, Uncoated (Bright) Finish, Round Shank with Square End, Pipe Chamfer, 2-1/2″-8 Size
- Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Comes with round with square end shank. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
Drillco 2900 Series High-Speed Steel Tap, Uncoated (Bright) Finish, Round Shank with Square End, Pipe Chamfer, 1-1/2″-11-1/2 Size
- Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Comes with round with square end shank. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
Drillco 2950 Series High-Speed Steel Tap, Uncoated (Bright) Finish, Round Shank with Square End, Pipe Chamfer, 3/4″-14 Size
- Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts. Comes with round with square end shank. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction.
Drillco 2930 Series High-Speed Steel Tap, Uncoated (Bright) Finish, Round Shank with Square End, Pipe Chamfer, 3/8″-18 Size
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Comes with round with square end shank.
Drillco 2700E Series Carbon Steel Tap, Uncoated (Bright) Finish, Round Shank with Square End, Pipe Chamfer, 1/16-27 Size by Drillco
- Made of carbon steeluncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applicationscomes with round with square end shankstraight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cutsright-hand cut tools have a cutting action that engages when they are run in a clockwise direction.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
