Martin 24H100SDS EF-1 Type Timing Pulley, 1/2″ Pitch, 24 Grooves, Heavy, 3/4 and 1″ Wide Belts, SDS QD Bushing, Double Flange
- Grooved design with 24 grooves for applications requiring synchronous rotation. For use with sds quick disconnect (qd) bushing (sold separately). High carbon steel for resistance to wear. Heavy (h) pitch profile for use with same-pitch trapezoidal tooth 3/4 and 1″ wide belts. Double flange to resist belt side thrust and maintain belt contact.
Atoplee 10pcs 3*12*4mm High Carbon Steel Wire V Groove Pulley
- Specifications materialhigh carbon steel dimension(inside diameter)3mm x (outer diameter)12mm x (thickness)4mm v groove width 2. 5mm v groove deepness 1mm package included 10pcs wire pulley with v groove.
Martin 60H100SF H-2 Type Timing Pulley, 1/2″ Pitch, 60 Grooves, Heavy, 3/4 and 1″ Wide Belts, SF QD Bushing, Flangeless
- For use with sf quick disconnect (qd) bushing (sold separately). Heavy (h) pitch profile for use with same-pitch trapezoidal tooth 3/4 and 1″ wide belts. Grooved design with 60 grooves for applications requiring synchronous rotation. Astm a48 class 30 gray cast iron for resistance to wear, corrosion, and galling. Flangeless pulley for use where belt side thrust is not an issue.
Boston Gear PA3011DF090 Timing Pulley, 3 mm Pitch, 9 mm Wide Belts, 11 Grooves, 0.125″ Bore Diameter, 0.384″ Outside Diameter, 0.688″ Overall Length, Aluminum, Double Flange
- Stock bore with 0125″ diameter does not require use of a bushing. Double flange to resist belt side thrust and maintain belt contact. Grooved design with 11 grooves for applications requiring synchronous rotation. Clear anodized aluminum for light weight and corrosion resistance. 3 mm pitch profile for use with same-pitch curvilinear tooth 9 mm wide belts.
Atoplee 3124mm 5225mm 5165mm High Carbon Steel Wire V Groove Pulley [3124mm, 20pcs]
- Specifications materialhigh carbon steel dimension(inside diameter)3mm x (outer diameter)12mm x (thickness)4mm v groove width 2. 5mm v groove deepness 1mm package included 20pcs wire pulley with v groove.
Martin 18H150SH EF-1 Type Timing Pulley, 1/2″ Pitch, 18 Grooves, Heavy, 1-1/2″ Wide Belts, SH QD Bushing, Double Flange
- Heavy (h) pitch profile for use with same-pitch trapezoidal tooth 1-1/2″ wide belts. High carbon steel for resistance to wear. For use with sh quick disconnect (qd) bushing (sold separately). Grooved design with 18 grooves for applications requiring synchronous rotation. Double flange to resist belt side thrust and maintain belt contact.
Martin 28H100SDS HF-1 Type Timing Pulley, 1/2″ Pitch, 28 Grooves, Heavy, 3/4 and 1″ Wide Belts, SDS QD Bushing, Double Flange
- High carbon steel for resistance to wear. Heavy (h) pitch profile for use with same-pitch trapezoidal tooth 3/4 and 1″ wide belts. Grooved design with 28 grooves for applications requiring synchronous rotation. Double flange to resist belt side thrust and maintain belt contact. For use with sds quick disconnect (qd) bushing (sold separately).
Boston Gear PLB5015DF09-3/8 Timing Pulley, 5 mm Pitch, 9 mm Wide Belts, 15 Grooves, 0.375″ Bore Diameter, 0.895″ Outside Diameter, 0.813″ Overall Length, Lexan with Aluminum Insert, Double Flange
- Stock bore with 0375″ diameter does not require use of a bushing. Grooved design with 15 grooves for applications requiring synchronous rotation. Double flange to resist belt side thrust and maintain belt contact. Fiberglass-reinforced polycarbonate resin thermoplastic for light weight and low noise. 5 mm pitch profile for use with same-pitch curvilinear tooth 9 mm wide belts.
Boston Gear G1216 Grooved Pulley, Fits Round Belts 0.1875″ or Smaller, 0.250″ Face, Brass
- Pulleys (sheaves) are available in different types v-belt, timing, round, or flat. The company, founded in 1877, is headquartered in charlotte, nc, and meets international organization for standardization (iso) standard 90012008 standard. . Pulley drive systems consist of two or more pulleys that connect with a belt to transmit mechanical power across greater distances than systems that use gears. Pulleys are used in drive designs in the automotive, appliance, agriculture, textile, printing, mining, and office equipment industries. Pulleys must match the belts that connect them (timing pulleys with trapezoidal grooves require a belt with trapezoidal teeth) and engage either on the sides of the pulley flange (classical v-belts, narrow v-belts, or round belts), on the flat outer diameter of the pulley (flat belts), or in pulley grooves that match belt teeth (timing belts, synchronous belts, or curvilinear belts). Pulleys are made of various materials, including cast iron, steel, aluminum, polycarbonate resin thermoplastic, and nylon, and they can meet a broad range of requirements, including increased torque, resistance to wear, and light weight. Boston gear manufactures gears, gear drives, bearings, valves, shaft collars, couplings, and other power and fluid transmission components.
G & G Manufacturing Company 011-4A08 V-Belt Idler Pulley, A Groove, 4″ O.D.
- Bore size 1/2″ id extended race bearing pressed in. V-belt idler pulley single groove. Fits ‘a’ belt. Outside diameter 4″.
G & G Manufacturing Company 007201005 AB Combination Groove Split Steel Weldapulley, 10″ O.D.
- Fits any w series weldahub to make a bored to size pulley. Rated up to 15 horsepower. Groove ab combination will fit either an ‘a’ or ‘b’ v-belt. Bore size 1-5/8″. 10″ od, single groove split steel pulley.
Martin 18H100SH EF-1 Type Timing Pulley, 1/2″ Pitch, 18 Grooves, Heavy, 3/4 and 1″ Wide Belts, SH QD Bushing, Double Flange
- High carbon steel for resistance to wear. Double flange to resist belt side thrust and maintain belt contact. For use with sh quick disconnect (qd) bushing (sold separately). Heavy (h) pitch profile for use with same-pitch trapezoidal tooth 3/4 and 1″ wide belts. Grooved design with 18 grooves for applications requiring synchronous rotation.
Martin 20H150SH EF-1 Type Timing Pulley, 1/2″ Pitch, 20 Grooves, Heavy, 1-1/2″ Wide Belts, SH QD Bushing, Double Flange
- Grooved design with 20 grooves for applications requiring synchronous rotation. Double flange to resist belt side thrust and maintain belt contact. Heavy (h) pitch profile for use with same-pitch trapezoidal tooth 1-1/2″ wide belts. For use with sh quick disconnect (qd) bushing (sold separately). Steel for resistance to wear.
Boston Gear G1215 Grooved Pulley, Fits Round Belts 0.1875″ or Smaller, 0.250″ Face, Brass
- Pulleys (sheaves) are available in different types v-belt, timing, round, or flat. Pulleys must match the belts that connect them (timing pulleys with trapezoidal grooves require a belt with trapezoidal teeth) and engage either on the sides of the pulley flange (classical v-belts, narrow v-belts, or round belts), on the flat outer diameter of the pulley (flat belts), or in pulley grooves that match belt teeth (timing belts, synchronous belts, or curvilinear belts). Pulley drive systems consist of two or more pulleys that connect with a belt to transmit mechanical power across greater distances than systems that use gears. The company, founded in 1877, is headquartered in charlotte, nc, and meets international organization for standardization (iso) standard 90012008 standard. Pulleys are used in drive designs in the automotive, appliance, agriculture, textile, printing, mining, and office equipment industries. Pulleys are made of various materials, including cast iron, steel, aluminum, polycarbonate resin thermoplastic, and nylon, and they can meet a broad range of requirements, including increased torque, resistance to wear, and light weight. Boston gear manufactures gears, gear drives, bearings, valves, shaft collars, couplings, and other power and fluid transmission components.
G & G Manufacturing Company 007200555 AB Combination Groove Split Steel Weldapulley, 5-1/2″ O.D.
- Bore size 1-5/8″. Rated up to 15 horsepower. Groove ab combination will fit either an ‘a’ or ‘b’ v-belt. Fits any w series weldahub to make a bored to size pulley. 5-1/2″ od, single groove split steel pulley.
Boston Gear PLB5020DF09-1/4 Timing Pulley, 5 mm Pitch, 20 Grooves, 9mm Wide Belts, 0.250″ Bore Diameter, 1.208″ Outside Diameter, 0.813″ Overall Length, Lexan with Aluminum Insert, Double Flange
- Fiberglass-reinforced polycarbonate resin thermoplastic for light weight and low noise. Grooved design with 20 grooves for applications requiring synchronous rotation. Stock bore with 0250″ diameter does not require use of a bushing. Double flange to resist belt side thrust and maintain belt contact. 5 mm pitch profile for use with same-pitch curvilinear tooth 9 mm wide belts.
Boston Gear G1220 Grooved Pulley, Fits Round Belts 0.1875″ or Smaller, 0.250″ Face, Brass
- Pulley drive systems consist of two or more pulleys that connect with a belt to transmit mechanical power across greater distances than systems that use gears. Pulleys (sheaves) are available in different types v-belt, timing, round, or flat. Pulleys are made of various materials, including cast iron, steel, aluminum, polycarbonate resin thermoplastic, and nylon, and they can meet a broad range of requirements, including increased torque, resistance to wear, and light weight. The company, founded in 1877, is headquartered in charlotte, nc, and meets international organization for standardization (iso) standard 90012008 standard. . Pulleys are used in drive designs in the automotive, appliance, agriculture, textile, printing, mining, and office equipment industries. Pulleys must match the belts that connect them (timing pulleys with trapezoidal grooves require a belt with trapezoidal teeth) and engage either on the sides of the pulley flange (classical v-belts, narrow v-belts, or round belts), on the flat outer diameter of the pulley (flat belts), or in pulley grooves that match belt teeth (timing belts, synchronous belts, or curvilinear belts). Boston gear manufactures gears, gear drives, bearings, valves, shaft collars, couplings, and other power and fluid transmission components.
Martin TB48L075 CF-1 Type Timing Pulley, 3/8″ Pitch, 48 Grooves, Light, 3/4″ Wide Belts, 2012 Taper Bushing, Double Flange
- Light (l) pitch profile for use with same-pitch trapezoidal tooth 3/4″ wide belts. Astm a48 class 30 gray cast iron for resistance to wear, corrosion, and galling. For use with 2012 taper bushing (tb) (sold separately). Grooved design with 48 grooves for applications requiring synchronous rotation. Double flange to resist belt side thrust and maintain belt contact.
TOOGOO(R) Double Flange XL Type 1/5″ Pitch 20 Tooth Groove Belt Timing Pulley
- Toogoo(r) double flange xl type 1/5″ pitch 20 tooth groove belt timing pulleydescriptiondesigned with double flange, is suitable for 0. Used widely in milling machine, cnc engine lathe, gear shaper, hobbing machine, drilling machine or other machinery transmission occassions. Toogoo is a registered trademark. Our products will enhance your experience to unparalleled inspiration. 43″ wide belt. Only authorized seller of toogoo can sell under toogoo listings. The timing pulley permit synchronizing shaft rotations and is also useful in high-reduction drives where there is need to improve the wrap-around capabilities of belts. Notelight shooting and differnent displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is 1¡À cm.
G & G Manufacturing Company 007200655 AB Combination Groove Split Steel Weldapulley, 6-1/2″ O.D.
- Fits any w series weldahub to make a bored to size pulley. Bore size 1-5/8″. Rated up to 15 horsepower. Groove ab combination will fit either an ‘a’ or ‘b’ v-belt. 6-1/2″ od, single groove split steel pulley.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
