Kyocera USA Made 2 Flute Standard Length Ball Nose End Mill 0.0625 1/16in Diameter 1/8in Shank 0.188in Length of Cut 1 1/2in Overall Length AlTiN Coated Series 1625 (1625-0625L188)
- Kyocera usa made 1625-0625l188 2 flute standard length ball nose end mill. 00625 1/16in diameter, 1/8in shank, 0188in length of cut, 1 1/2in overall length. Series 1625, altin coated. This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. Reach length n/a, radius n/a.
Sino-max M2 High Speed Steel End Mill, Polished Finish, 2 Flute, Square End, 1″ Cutting Length, 1/2″ Cutting Diameter, 3″ Overall Length, 1/2″ Shank (Pack of 1)
- M2 highs speed steel enable high hardness. Bright polished surface treatment enable nice looking. 2 flutes design to enable quick chips removal and quick cutting. High level heat treatment.
Kyocera USA Made 2 Flute Stub Length Square End Mill 0.2mm Diameter 3mm Shank 0.3mm Length of Cut (LOC) 38mm Overall Length (OAL) Uncoated Series 1620 (1620-0079.012)
- Uncoated. Kyocera 1620-0079012 2 flute stub length square end mill. This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. 02mm diameter, 3mm shank. 03mm length of cut, 38mm overall length.
Kyocera USA Made 2 Flute Standard Length Square End Mill 1mm Diameter 3mm Shank 3mm Length of Cut (LOC) 38mm Overall Length (OAL) AlTiN Coated Series 1610 (1610-0394L118)
- 3mm length of cut, 38mm overall length. 1mm diameter, 3mm shank. Kyocera 1610-0394l118 2 flute standard length square end mill. Altin coated. This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number.
Kyocera Standard Length APOLLO Variable Helix End Mill 0.1250 1/8in Diameter 1/8in Shank 1/2in Length of Cut 1-1/2in Overall Length AlCrN 4 Flute Corner Radius AP4-1250.500
- Coating alcrn, flutes 4 flute. This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. Diameter 01250 1/8in, shank 1/8in, length of cut 1/2in, overall length 1-1/2in. Kyocera ap4-1250500 standard length apollo variable helix end mill. End type corner radius, reach n/a, radius 0010, 0015in, point angle n/a.
Kyocera USA Made 4 Flute Standard Length Small Corner Radius End Mill 0.0250in Diameter 1/8in Shank 0.038in Length of Cut 1 1/2in Overall Length AlTiN Coated Series 1812 (1812-0250L038CR)
- 00250in diameter, 1/8in shank, 0038in length of cut, 1 1/2in overall length. Reach length n/a, radius 0005in. This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. Kyocera usa made 1812-0250l038cr 4 flute standard length small corner radius end mill. Series 1812, altin coated.
Kyocera USA Made 3 Flute Extended Reach Large Corner Radius End Mill 0.1250 1/8in Diameter 1/8in Shank 0.187in Length of Cut 2 1/2in Overall Length AlTiN Coated Series 1746 (1746-1250L1000C)
- Series 1746, altin coated. This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. Kyocera usa made 1746-1250l1000c 3 flute extended reach large corner radius end mill. 01250 1/8in diameter, 1/8in shank, 0187in length of cut, 2 1/2in overall length. Reach length 1in, radius 003in.
Kyocera USA Made 3 Flute Standard Length Square End Mill 0.01in Diameter 1/8in Shank 0.05in Length of Cut 2 1/2in Overall Length Uncoated Series 1710 (1710-0100.050)
- Series 1710, uncoated. Reach length n/a, radius n/a. This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. Kyocera usa made 1710-0100050 3 flute standard length square end mill. 001in diameter, 1/8in shank, 005in length of cut, 2 1/2in overall length.
Kyocera USA Made 3 Flute Extended Reach Stub Length Ball Nose End Mill 0.0500in Diameter 1/8in Shank 0.075in Length of Cut 2 1/2in Overall Length Uncoated Series 1755 (1755-0500.250)
- 00500in diameter, 1/8in shank, 0075in length of cut, 2 1/2in overall length. Reach length 025in, radius n/a. Series 1755, uncoated. Kyocera usa made 1755-0500250 3 flute extended reach stub length ball nose end mill. This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number.
Kyocera USA Made 3 Flute Extended Reach Stub Length Ball Nose End Mill 0.0400in Diameter 1/8in Shank 0.060in Length of Cut 2 1/2in Overall Length AlTiN Coated Series 1755 (1755-0400L203)
- Reach length 0203in, radius n/a. Kyocera usa made 1755-0400l203 3 flute extended reach stub length ball nose end mill. This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. 00400in diameter, 1/8in shank, 0060in length of cut, 2 1/2in overall length. Series 1755, altin coated.
Kyocera USA Made 5 Flute High Helix Standard Length Corner Radius End Mill 1.00mm Diameter 3mm Shank 3.00mm Length of Cut 38mm Overall Length Uncoated Series 1905 (1905-0394.118R)
- This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. 100mm diameter, 3mm shank, 300mm length of cut, 38mm overall length. Series 1905, uncoated. Reach length n/a, radius 010mm. Kyocera usa made 1905-0394118r 5 flute high helix standard length corner radius end mill.
Kyocera USA Made 3 Flute Extended Length Square End Mill 0.0312 1/32in Diameter 1/8in Shank 0.155in Length of Cut (LOC) 2 1/2in Overall Length (OAL) AlTiN Coated Series 1740 (1740-0312L310)
- 00312 1/32in diameter, 1/8in shank. Kyocera 1740-0312l310 3 flute extended length square end mill. 0155in length of cut, 2 1/2in overall length. This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. Altin coated.
Kyocera USA Made 3 Flute Extended Reach Small Corner Radius End Mill 0.0312 1/32in Diameter 1/8in Shank 0.046in Length of Cut 2 1/2in Overall Length AlTiN Coated Series 1743 (1743-0312L375CR)
- Kyocera usa made 1743-0312l375cr 3 flute extended reach small corner radius end mill. 00312 1/32in diameter, 1/8in shank, 0046in length of cut, 2 1/2in overall length. Series 1743, altin coated. Reach length 0375in, radius 0005in. This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number.
Kyocera USA Made 3 Flute Extended Reach Stub Length Square End Mill 0.0750in Diameter 1/8in Shank 0.112in Length of Cut (LOC) 2 1/2in Overall Length (OAL) Uncoated Series 1742 (1742-0750.900)
- Uncoated. 0112in length of cut, 2 1/2in overall length. 00750in diameter, 1/8in shank. Kyocera 1742-0750900 3 flute extended reach stub length square end mill. This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number.
Kyocera USA Made 2 Flute Stub Length Ball Nose End Mill 0.15mm Diameter 3mm Shank 0.23mm Length of Cut 38mm Overall Length Uncoated Series 1635 (1635-0059.009)
- This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. 015mm diameter, 3mm shank, 023mm length of cut, 38mm overall length. Kyocera usa made 1635-0059009 2 flute stub length ball nose end mill. Reach length n/a, radius n/a. Series 1635, uncoated.
Kyocera USA Made 2 Flute Standard Length Square End Mill 0.085in Diameter 1/8in Shank 0.255in Length of Cut (LOC) 1 1/2in Overall Length (OAL) AlTiN Coated Series 1610 (1610-0850L255)
- 0085in diameter, 1/8in shank. This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. Altin coated. Kyocera 1610-0850l255 2 flute standard length square end mill. 0255in length of cut, 1 1/2in overall length.
Kyocera USA Made 2 Flute Standard Length Square End Mill 0.0625 1/16in Diameter 1/8in Shank 0.188in Length of Cut (LOC) 1 1/2in Overall Length (OAL) Uncoated Series 1610 (1610-0625.188)
- Uncoated. Kyocera 1610-0625188 2 flute standard length square end mill. This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. 0188in length of cut, 1 1/2in overall length. 00625 1/16in diameter, 1/8in shank.
Kyocera USA Made 3 Flute Extended Reach Stub Length Square End Mill 0.0156 1/64in Diameter 1/8in Shank 0.022in Length of Cut (LOC) 2 1/2in Overall Length (OAL) Uncoated Series 1742 (1742-0156.156)
- Uncoated. This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. 00156 1/64in diameter, 1/8in shank. 0022in length of cut, 2 1/2in overall length. Kyocera 1742-0156156 3 flute extended reach stub length square end mill.
Kyocera USA Made 3 Flute Extended Reach Stub Length Square End Mill 0.0450in Diameter 1/8in Shank 0.067in Length of Cut (LOC) 2 1/2in Overall Length (OAL) Uncoated Series 1742 (1742-0450.135)
- 00450in diameter, 1/8in shank. Kyocera 1742-0450135 3 flute extended reach stub length square end mill. 0067in length of cut, 2 1/2in overall length. This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. Uncoated.
Kyocera USA Made 3 Flute Extended Reach Standard Corner Radius End Mill 0.1250 1/8in Diameter 1/8in Shank 0.187in Length of Cut 3in Overall Length Uncoated Series 1744 (1744-1250.1500C)
- This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. Reach length 15in, radius 0015in. Series 1744, uncoated. Kyocera usa made 1744-12501500c 3 flute extended reach standard corner radius end mill. 01250 1/8in diameter, 1/8in shank, 0187in length of cut, 3in overall length.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
