SKT46158 3 Pc. 1/2 Drive Locking Impact Extensions Set (3″, 5″, 10″)
- Designed for automotive, aviation, and heavy duty applications single body construction for maximum durability and strength patented locking feature locks sockets to the extension preventing it from becoming loose or disengaged set contains 3″, 5″, and 10″
.
Sunex 3500 3/8-Inch Drive Impact Extension Set, 4-Piece
- Overall product weight -2. 7 inches. 7 pounds. 4 inches. -fully guaranteedincludes sizes 3″, 5″, 10″ and 15″. Overall width, side to side -5. Generic dimensions -4 piece 3/8” drive impact extension set. . -Comes in a heavy molded storage tray. Su3500 features -forged from the finest chrome molybdenum alloy steel, the best choice for strength and durability. Dimensions overall height, top to bottom -1.
SK Hand Tool 31160 Drive Impact Extension Set, 1/4-Inch, 3-Piece
- This not only provides increased strength, but also avoids the rounding of rusted or damaged fasteners, which can occur when using a sharp cornered hex tool. Black coating for corrosion resistance. A. S. Suregrip drive design drives the side of the fastener, not the corner, to provide increased strength and avoid rounding of rusted or damaged fasteners. , Featuring the sk suregrip hex design, which drives the side of the hex, not the corner. Made in the u.
TEKTON 4883 1/2-Inch Drive Deep Impact Socket Set, Metric, 10 mm – 24 mm, 15-Sockets with TEKTON 4971 1/2-Inch Drive Impact Extension Bar Set
- Sockets extra-deep broach accommodate longer fasteners. Engineered for use with impact drivers. Extensons spring-loaded detent balls securely latch onto sockets, preventing them from being dropped. Extensions add length to access hard-to-reach fasteners. Extensions through-hole in drive ends locks onto drive tang. Sockets high-torque, 6-point socket design grips the flat sides of fasteners, not just the corners, preventing round-off.
Sunex 3504 3/8-Inch Drive Impact Wobble Extension Set, 4-Piece
- This sunex 3/8 inch drive 4 piece wobble extension set includes the most common sizes used for automotive repair. The wobble drive provides 15 degree offset in all directions, with a steel ball retainer on male end. It includes 4 sae pieces (in) 3, 5, 10, 15. It is fully guaranteed, and includes a heavy duty blow molded storage case. It is made of cr-mo alloy steel for long life.
Sunex 3501 3/8-Inch Drive Locking Impact Extension Set, 3-Piece by Sunex International
- Feature a positive locking ball and sliding collar for quick release of sockets and accessoriesuseful in hard to reach where a positive lock on the socket is requiredradius corners of square drive reduces socket wear over timeforged from high quality cr-mo alloy steelall sunex impact sockets meet or exceed asme specifications.
Sunex 2501 1/2-Inch Drive Locking Impact Extension Set, 3-Piece
- Feature a positive locking ball detent and sliding collar for quick release of sockets and accessories. Radius corner design of square drives reduces socket wear over time. Useful in hard to reach areas where a positive lock on the socket is required. Includes 3″, 6″, and 12″ locking extensions. Forged from high quality cr-mo alloy steel.
Sk Hand Tool SKT-46159 3 Pc. 1/2 Drive Locking Impact Extensions Set [18, 24, 31]
- Recesses machined into female end is designed for new impact guns. 4 pc 3/8″ drive impact extension set. Set locking im 1/2dr 3pc. Incorporates a pin on the square drive providing maximum security against accidental disengagement of the socket, safety. Manufactured from high alloy steel using the most up-to-date manufacturing process and heat treat for greater strength and durability.
EPAuto 1/2″ Drive Impact Socket Extension Bar Set, Cr-V, 3 Pieces
- Durability made from hardened treated chrome vanadium steel alloy (cr-v). Corrosion-retardant black phosphate coating. Locks onto drive tang. Make in taiwan.
4 Piece 3/8″” Drive Impact Extension Set
- This product also meets the large package requirement per ups/fedex. Features and benefits forged from the finest chrome molybdenum alloy steel – the best choice for strength and durability comes in a heavy molded storage tray fully guaranteedincludes sizes 3″, 5″, 10″ and 15″. This product meets the oversized requirement per ups/fedex. The shipping weight reflected is the dimensional weight. . The estimated shipping cost will include this fee.
Sunex 3501 3/8-Inch Drive Locking Impact Extension Set, 3-Piece by Sunex
- Feature a positive locking ball and sliding collar for quick release of sockets and accessoriesuseful in hard to reach where a positive lock on the socket is requiredradius corners of square drive reduces socket wear over timeforged from high quality cr-mo alloy steelall sunex impact sockets meet or exceed asme specifications.
4pc 1/2 in dr. Impact Extension Set
- 4 pc 1/2 inch dr impact extension set-2pack. 4 piece 1/2 drive impact extension set (1 3/4, 2 1/2, 4 1/4 & 9 1/4), pittsburgh. 4 pc 3/8 inch dr impact extension set-2pack.
6pc 3/8″ 1/2″ Drive Impact Extension Set Socket 3″ 6 8 Air Mechanics Long Socket
- Extension bar 3pc 3/8″. Sizes 3″ 6″ and 8″. 6pc air impact. Dr sizes 3″ 6″. And 8″ 3pc 1/2″ dr.
6pc 3/8″ 1/2″ Drive Impact Extension Set Socket 3″ 6 8 Air Mechanics Long Socket
- 3/8″ drive 3″, 6″, 8″ long. 1/2″ drive 3″, 6″, 8″ long.
Stanley Proto J7515 1/2-Inch Drive Locking Impact Extension Set, 3-Piece
- Patented locking feature locks sockets to the extension with exceptional force. Stanley j7515 proto 1/2-inch drive 3 piece locking impact extension set solid one-piece design helps prevent the locking components from becoming loose or disengaged. Proto 1/2″ drive 3 piece locking impact extension set includes the following items j7503, j7505, j7510. . Knurled shank provides a slip-resistant grip when hand-turning the extension.
Sunex 3501 3/8-Inch Drive Locking Impact Extension Set, 3-Piece
- Radius corners of square drive reduces socket wear over time. Forged from high quality cr-mo alloy steel. Feature a positive locking ball and sliding collar for quick release of sockets and accessories. Useful in hard to reach where a positive lock on the socket is required. All sunex impact sockets meet or exceed asme specifications.
SK 46164 4-Piece 1/2-Inch Drive Impact Extension Set by SK Hand Tool
- Ships from 1 of 10 warehouses around the country you get your tools fast with standard shipping. Sk 46164 4-piece 1/2-inch drive impact extension set. Hand tools. Extension 3/8 dr impact set 4pc. Professional.
OEMTOOLS 25240 1/2 Inch Drive Impact Conversion Extension Set, 3-Piece
- Drive socket. The oemtools 3 piece 1/2 to 3/8 inch drive impact extension adapter set is a specialty extension set is great for working in tight areas that need the power of a 1/2 in. Drive impact tool but only have space for a 3/8 in.
Sunex 3501 3/8-Inch Drive Locking Impact Extension Set, 3-Piece by Sunex
- Feature a positive locking ball and sliding collar for quick release of sockets and accessoriesuseful in hard to reach where a positive lock on the socket is requiredradius corners of square drive reduces socket wear over timeforged from high quality cr-mo alloy steelall sunex impact sockets meet or exceed asme specifications.
4 Pc. 3/8 Inch Dr. Impact Extension Set-2pack
- 4 pc 1/2 inch dr impact extension set-2pack. 4 pc 3/8 inch dr impact extension set-2pack. 4 piece 1/2 drive impact extension set (1 3/4, 2 1/2, 4 1/4 & 9 1/4), pittsburgh.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
