21 Best Spiral Flute Taps in 2020

 

M3 M4 M5 M6 M8 Titanium Coated HSS Spiral Flute Metric Tap Set 5Pcs #ad

M3 M4 M5 M6 M8 Titanium Coated HSS Spiral Flute Metric Tap Set 5Pcs

M3 M4 M5 M6 M8 Titanium Coated HSS Spiral Flute Metric Tap Set 5Pcs #ad - Included 5pcs of m3, m4, m5, m6, m8 titanium plated spiral tap, made of hss 6542. Features spiral groove, can tap to the lowest part of the blind hole, no residual cutting, good chip removal effect, fast cutting, easy to enter the bottom hole. Spiral tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and sticky materials processing. Applicable material suitable for wood, aluminum, iron, thin stainless steel. Use to cut continuously curved material, blind hole processing, hole with an axial groove.

 

YG-1 F4 Series Vanadium Alloy HSS Spiral Flute Tap Steam Oxide Round Shank with Square End Bottoming Chamfer 10-32 Thread Size H3 Tolerance #ad

YG-1 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 10-32 Thread Size, H3 Tolerance

YG-1 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 10-32 Thread Size, H3 Tolerance #ad - Round shanks allow use with a wide variety of toolholding systems. 05-inches thread length. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge.

 

YG-1 F4 Series Vanadium Alloy HSS Spiral Flute Tap Steam Oxide Round Shank with Square End Bottoming Chamfer 716-14 Thread Size H3 Tolerance #ad

YG-1 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 7/16″-14 Thread Size, H3 Tolerance

YG-1 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 7/16″-14 Thread Size, H3 Tolerance #ad - High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. 0875-inches thread length. Round shanks allow use with a wide variety of toolholding systems.

 

YG-1 F8 Series Vanadium Alloy HSS Spiral Flute Tap TiN Coated Round Shank with Square End Bottoming Chamfer 10-32 Thread Size H3 Tolerance #ad

YG-1 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Bottoming Chamfer, 10-32 Thread Size, H3 Tolerance

YG-1 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Bottoming Chamfer, 10-32 Thread Size, H3 Tolerance #ad - High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. 05-inches thread length. Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems.

 

YG-1 F8 Series Vanadium Alloy HSS Spiral Flute Tap TiN Coated Round Shank with Square End Bottoming Chamfer 14-20 Thread Size H5 Tolerance #ad

YG-1 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Bottoming Chamfer, 1/4″-20 Thread Size, H5 Tolerance

YG-1 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Bottoming Chamfer, 1/4″-20 Thread Size, H5 Tolerance #ad - Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools. 0625-inches thread length. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems.

 

12-24 UNC Spiral Flute Tap Bottom GH3 Limit 2 Flute HSS Uncoated Bright Finished Ground Thread Luctool Provides Premium Quality Hand Tools for Metal Threading #ad

12-24 UNC Spiral Flute Tap Bottom GH3 Limit 2 Flute HSS Uncoated Bright Finished Ground Thread. Luctool Provides Premium Quality Hand Tools for Metal Threading.

12-24 UNC Spiral Flute Tap Bottom GH3 Limit 2 Flute HSS Uncoated Bright Finished Ground Thread. Luctool Provides Premium Quality Hand Tools for Metal Threading. #ad - Luctool provides threading tools including taps, dies and related products. Making our hardworking people happy with tools having premium quality and reasonable price. Satisfaction guarantee–60 days money back your satisfaction is always our priority. Prompt shipping from us warehouse. Our tools are widely applied on metal cutting, home improvement, thread repairing and construction.

 

YG-1 F8 Series Vanadium Alloy HSS Spiral Flute Tap TiN Coated Round Shank with Square End Bottoming Chamfer 516-18 Thread Size H5 Tolerance #ad

YG-1 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Bottoming Chamfer, 5/16″-18 Thread Size, H5 Tolerance

YG-1 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Bottoming Chamfer, 5/16″-18 Thread Size, H5 Tolerance #ad - 06875-inches thread length. Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.

 

Morse Cutting Tools 36176 Spiral Flute Taper Pipe Taps High-Speed Steel Bright Finish NPTF Thread 4 Flutes 12-14 Size #ad

Morse Cutting Tools 36176 Spiral Flute Taper Pipe Taps, High-Speed Steel, Bright Finish, NPTF Thread, 4 Flutes, 1/2″-14″ Size

Morse Cutting Tools 36176 Spiral Flute Taper Pipe Taps, High-Speed Steel, Bright Finish, NPTF Thread, 4 Flutes, 1/2″-14″ Size #ad - Nptf threads are used for applications requiring a tight seal without the use of thread sealants. Spiral flute taper pipe taps are recommended for tapping string and ductile materials that produce long stringy chips. The spiral flute lifts the chips out of the hole to eliminate chip packing.

 

MaxTool 38-16 Spiral Flute Tap 16TPI HSS M2 Fully Ground Right Hand SFF02W02R24 #ad

MaxTool 3/8-16 Spiral Flute Tap; 16TPI HSS M2 Fully Ground Right Hand; SFF02W02R24

MaxTool 3/8-16 Spiral Flute Tap; 16TPI HSS M2 Fully Ground Right Hand; SFF02W02R24 #ad - The premium high speed steel material provides long tool life. The spiral flutes are suitable for threading through holes and blind or bottoming holes. They are used to create right-hand threads in a range of materials. Maxtool unc and unf uncoated high-speed steel spiral flute taps have spiral flutes and round shanks with square driver. You can always rely on maxtoolmaxtool’s slogan is consistent quality maxtool toolmax. This uncoated taps can be used on a broad range of materials. Maxtool is a cutting tools distributor in new york to meet a wide range cutting demand of customers in today’s markets, which include automotive, aerospace, electronics, medical, printed circuit boards, optical industries, and moremaxtool maintains the leading spirit in supply of standard and custom-made high performance cutting tools, such as polycrystalline diamond (pcd), polycrystalline cubic boron nitride (pcbn), carbide, high speed steel (hss) tools, hole saws, diamond wheels, etc for machining ferrous, non-ferrous, composite, fiberglass, and carbon fiber materials. The round shank with square driver makes the taps suitable for hand or power-driven applications. We offer our products worldwide, unless otherwise restricted by our suppliersin addition, maxtool offers re-sharpening services and custom tooling solutionsmaxtool warmly welcomes everyone to visit our amazon store, and honestly appreciates everyone very much to give a cooperative chance to discuss your requirementmaxtool will do the best to make each buyer satisfaction. It is available in three different ansi standards unc (unified coarse), unf (unified fine), or uns (unified special).

 

INHDBOX 5 Pcs M3 M4 M5 M6 M8 Titanium Coated HSS Spiral Flute Metric Taps Set #ad

INHDBOX 5 Pcs M3 M4 M5 M6 M8 Titanium Coated HSS Spiral Flute Metric Taps Set

INHDBOX 5 Pcs M3 M4 M5 M6 M8 Titanium Coated HSS Spiral Flute Metric Taps Set #ad - Spiral tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and. Spiral groove is conducive to remove crumbs, not easily broken tap. High hardness, fast cutting, wear high temperature. Sticky materials processing. 100% brand new and high quantity.

 

Yootop M3 HSS 3 Flute Spiral Point Taps 3x05mm Pitch with Storage Case #ad

Yootop M3 HSS 3 Flute Spiral Point Taps 3×0.5mm Pitch with Storage Case

Yootop M3 HSS 3 Flute Spiral Point Taps 3×0.5mm Pitch with Storage Case #ad - Spiral tap is also suitable for machining nuts or cut internal threads on the machine. M3 spiral tap is ideal for hand machine where metric threads are specified. Package included 3 pcs x m3 hss 3 flutes spiral pointed tap. Pointed tap with three flute design on all taps ensures fast and easy chip clearance. The m3 tap is all-steel design with chromium-plated finish for the highest durability.

 

Rocaris 5 Pcs M3 M4 M5 M6 M8 Titanium Coated HSS Spiral Flute Metric Taps Set #ad

Rocaris 5 Pcs M3 M4 M5 M6 M8 Titanium Coated HSS Spiral Flute Metric Taps Set

Rocaris 5 Pcs M3 M4 M5 M6 M8 Titanium Coated HSS Spiral Flute Metric Taps Set #ad - Sticky materials processing. High hardness, fast cutting, wear high temperature. Spiral groove is conducive to remove crumbs, not easily broken tap. Spiral tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and.

 

YG-1 F8 Series Vanadium Alloy HSS Spiral Flute Tap TiN Coated Round Shank with Square End Bottoming Chamfer 38-24 Thread Size H3 Tolerance #ad

YG-1 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Bottoming Chamfer, 3/8″-24 Thread Size, H3 Tolerance

YG-1 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Bottoming Chamfer, 3/8″-24 Thread Size, H3 Tolerance #ad - High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems. 075-inches thread length. Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools.

 

Union Butterfield 1590UNC High-Speed Steel Spiral Flute Tap Heavy-Duty Black Oxide Finish Round Shank with Square End Plug Chamfer 10-24 Thread Size #ad

Union Butterfield 1590(UNC) High-Speed Steel Spiral Flute Tap, Heavy-Duty, Black Oxide Finish, Round Shank with Square End, Plug Chamfer, 10-24 Thread Size

Union Butterfield 1590(UNC) High-Speed Steel Spiral Flute Tap, Heavy-Duty, Black Oxide Finish, Round Shank with Square End, Plug Chamfer, 10-24 Thread Size #ad - Spiral flutes for creating threads in blind holes. Available in unc (unified coarse) or unf (unified fine) right-hand thread options for different applications. Spiral flute tap design pulls chips back from the tip of the tool and out of the hole to prevent clogging. Black oxide finish improves lubricity, resists corrosion, and helps prevent buildup. Heavy-duty design is suitable for tougher materials.

 

YG-1 F8 Series Vanadium Alloy HSS Spiral Flute Tap TiN Coated Round Shank with Square End Bottoming Chamfer 38-16 Thread Size H3 Tolerance #ad

YG-1 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Bottoming Chamfer, 3/8″-16 Thread Size, H3 Tolerance

YG-1 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Bottoming Chamfer, 3/8″-16 Thread Size, H3 Tolerance #ad - Round shanks allow use with a wide variety of toolholding systems. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools. 075-inches thread length.

 

ACCUPRO Modified Bottoming Spiral Flute Tap M8x100 D6 3FL HSSE Oxide #ad

ACCUPRO Modified Bottoming Spiral Flute Tap M8x1.00 D6 3FL HSSE Oxide

ACCUPRO Modified Bottoming Spiral Flute Tap M8x1.00 D6 3FL HSSE Oxide #ad - Chamfer modified bottoming. Thread limit d6. Thread standard metric fine. Thread size m8x100. Class of fit.

 

YG-1 F1 Series Vanadium Alloy HSS Spiral Flute Tap Uncoated Bright Finish Round Shank with Square End Modified Bottoming Chamfer M3-05 Thread Size D3 Tolerance #ad

YG-1 F1 Series Vanadium Alloy HSS Spiral Flute Tap, Uncoated (Bright) Finish, Round Shank with Square End, Modified Bottoming Chamfer, M3-0.5 Thread Size, D3 Tolerance

YG-1 F1 Series Vanadium Alloy HSS Spiral Flute Tap, Uncoated (Bright) Finish, Round Shank with Square End, Modified Bottoming Chamfer, M3-0.5 Thread Size, D3 Tolerance #ad - 0197-inches thread length. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems.

 

Guhring Powertap 14-20 Spiral Flute tap HSS-E Cobalt Oxide #ad

Guhring Powertap, 1/4-20 Spiral Flute tap, HSS-E (Cobalt), Oxide

Guhring Powertap, 1/4-20 Spiral Flute tap, HSS-E (Cobalt), Oxide #ad - Package include total 10 pieces of taps in different sizes, m1 m12 m14 m16 m17 m18 m2 m25 m3 m35 that’s enough for mini tapping. With these machine hand taps, you will have a smooth tapping experience. These micro taps mainly used for clocks and watches, and low hardness of wood and soft metal hole processing. Standard metric thread design, clear and tidy, no burr, provide rapid chip removal for efficient threading. Made of high speed steel with high wear and heat resistant, durable and has long service life.

 

YG-1 F8 Series Vanadium Alloy HSS Spiral Flute Tap TiN Coated Round Shank with Square End Bottoming Chamfer 6-32 Thread Size H3 Tolerance #ad

YG-1 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Bottoming Chamfer, 6-32 Thread Size, H3 Tolerance

YG-1 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Bottoming Chamfer, 6-32 Thread Size, H3 Tolerance #ad - High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Round shanks allow use with a wide variety of toolholding systems. 0375-inches thread length. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools.

 

YG-1 F8 Series Vanadium Alloy HSS Spiral Flute Tap TiN Coated Round Shank with Square End Bottoming Chamfer 2-56 Thread Size H2 Tolerance #ad

YG-1 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Bottoming Chamfer, 2-56 Thread Size, H2 Tolerance

YG-1 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Bottoming Chamfer, 2-56 Thread Size, H2 Tolerance #ad - Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. 04375-inches thread length. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems.

 

10 Pcs Micro Taps for Clocks and Watches Tapping Mini Spiral Flute Taps Machine Tap Sets Metric Straight Flute Coarse Thread Design M1 M12 M14 M16 M17 M18 M2 M25 M3 M35 #ad

10 Pcs Micro Taps for Clocks and Watches Tapping, Mini Spiral Flute Taps Machine Tap Sets Metric Straight Flute Coarse Thread Design, M1 M1.2 M1.4 M1.6 M1.7 M1.8 M2 M2.5 M3 M3.5

10 Pcs Micro Taps for Clocks and Watches Tapping, Mini Spiral Flute Taps Machine Tap Sets Metric Straight Flute Coarse Thread Design, M1 M1.2 M1.4 M1.6 M1.7 M1.8 M2 M2.5 M3 M3.5 #ad - Standard metric thread design, clear and tidy, no burr, provide rapid chip removal for efficient threading. Made of high speed steel with high wear and heat resistant, durable and has long service life. These micro taps mainly used for clocks and watches, and low hardness of wood and soft metal hole processing. Package include total 10 pieces of taps in different sizes, m1 m12 m14 m16 m17 m18 m2 m25 m3 m35 that’s enough for mini tapping. With these machine hand taps, you will have a smooth tapping experience.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.