21 Best Steel Band Saw Blades in 2019

 

Magnate M52.75C316R14 Carbon Tool Steel Bandsaw Blade, 52-3/4″ Long – 3/16″ Width; 14 Raker Tooth - Blade has 4-teeth per inch. For wood or metal cutting 1/2″ width 4 hook tooth 0025″ thickness 0049″ kerf. Provides long tooth life and exceptional durability. For wood or metal cutting 3/16″ width 14 raker tooth 0025″ thickness. Replacement blade for hitachi cb75f 14-1/2inch resaw band saw. Cones with a 30-day limited warranty. For wood or metal cutting 1/4″ width 24 raker tooth 0025″ thickness. Replacement blade for hitachi model cb75f 14-1/2-inch resaw band saw.

 

Magnate M62C14R24 Carbon Tool Steel Bandsaw Blade, 62″ Long – 1/4″ Width; 24 Raker Tooth - Cones with a 30-day limited warranty. Replacement blade for hitachi model cb75f 14-1/2-inch resaw band saw. Blade has 4-teeth per inch. For wood or metal cutting 1/4″ width 24 raker tooth 0025″ thickness. Provides long tooth life and exceptional durability. Replacement blade for hitachi cb75f 14-1/2inch resaw band saw. This blade has 4 teeth per inch. Comes with a 30-day limited warranty.

 

Magnate M99.75C14R14 Carbon Tool Steel Bandsaw Blade, 99-3/4″ Long – 1/4″ Width; 14 Raker Tooth - Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 99-3/4 inch ( 8 ft. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. It can cut all types of woods and is especially ideal for soft woods i. Steel). The picture depicted represents one blade the pricing is for one blade/package. Carbon tool steel bandsaw blades are made from high end carbon steel. 3-3/4 inch, 8′ 3-3/4″ ) bandsaw blades suit the following models craftsman professional 14 general international 90-100 m1 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. It is also used for cutting plastics, aluminum, metals, and mild steel. 2, if the owner’s manual is not available, refer to previous invoices. E. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. 3, cut your old bandsaw blade so that it lies flat on a level surf. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Pine, polar, fir and spruce. E.

 

Magnate M70.5C18R18 Carbon Tool Steel Bandsaw Blade, 70-1/2″ Long – 1/8″ Width; 18 Raker Tooth - Pine, polar, fir and spruce. Carbon tool steel bandsaw blades are made from high end carbon steel. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. It is also used for cutting plastics, aluminum, metals, and mild steel. 3, cut your old bandsaw blade so that it lies flat on a level sur. The picture depicted represents one blade the pricing is for one blade/package. It can cut all types of woods and is especially ideal for soft woods i. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Steel). E. 2, if the owner’s manual is not available, refer to previous invoices. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 70-1/2 inch ( 5 ft. E. 10-1/2 inch, 5′ 10-1/2″ ) bandsaw blades suit the following models craftsman 10″ 921400 atlas workshop 9360, 912 rikon 10-305 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced.

 

Magnate M59.25C38R24 Carbon Tool Steel Bandsaw Blade, 59-1/4″ Long – 3/8″ Width; 24 Raker Tooth - Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. It is also used for cutting plastics, aluminum, metals, and mild steel. Carbon tool steel bandsaw blades are made from high end carbon steel. It can cut all types of woods and is especially ideal for soft woods i. Pine, polar, fir and spruce. E. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 59-1/4 inch ( 4 ft. Steel). E. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. 11-1/4 inch, 4′ 11-1/4″ ) bandsaw blades suit the following models ryobi bs903 (59-1/4″ to 59-1/2 ) black & decker, 9411 sears craftsman skil 9″, 3381-01 tradesman 9″pro-tech 9″ collins 9″ toolkraft 4500, 4502 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. 2, if the owner’s manual is not available,. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. The picture depicted represents one blade the pricing is for one blade/package.

 

Magnate M131.5C14H6 Carbon Tool Steel Bandsaw Blade, 131-1/2″ Long – 1/4″ Width; 6 Hook Tooth - The picture depicted represents one blade the pricing is for one blade/package. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 131-1/2 inch ( 10 ft. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. Pine, polar, fir and spruce. 3, cut your old bandsaw blade so t. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. It can cut all types of woods and is especially ideal for soft woods i. 2, if the owner’s manual is not available, refer to previous invoices. 11-1/2 inch, 10′ 11-1/2″ ) bandsaw blades suit the following modelsgrizzly g0513 g0513x2 g0513b g0640x 17″ general international 90-320 m1 (metalcutting) if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Steel). It is also used for cutting plastics, aluminum, metals, and mild steel. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Carbon tool steel bandsaw blades are made from high end carbon steel. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. E. E.

 

Magnate M72C38H6 Carbon Tool Steel Bandsaw Blade, 72″ Long – 3/8″ Width; 6 Hook Tooth - Steel). It is also used for cutting plastics, aluminum, metals, and mild steel. The type of tooth pattern used depends on the thickness of metal material to be cut. E. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. , 6′ ) bandsaw blades suit the following models shopsmith 10. All bandsaw blades are folded into 3 rings to avoid bulky packaging, the picture depicted represents one blade the pricing is for one blade/package. It can cut all types of woods and is especially ideal for soft woods i. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. Pine, polar, fir and spruce. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed 72 inch ( 6 ft. Carbon tool steel bandsaw blades are made from high end carbon steel. In order to cut metal materials, the following is a guideline for choosing the adequate tooth pattern of a carbon tool steel bandsaw blade. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. E. Use 24 raker to cut 1/16″ to 1/4″ thick material, use 18 raker to cut 1/8″ to 3/8″ thick material, use 14 raker to cut 3/16″ to 7/16″ thick material, use 10 raker to cut 1/4″ to 5/8″ thick material, use 6 hook to cut 3/8″ to 2″ thick material, use 4 hook to cut 3/4″ to 4-1/2″ thick material, use 3 hook to cut 1″ to 6″ thick material, use 2 hook to cut 2″ to 12″ thick material, note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc.

 

Magnate M67.5C14H4 Carbon Tool Steel Bandsaw Blade, 67-1/2″ Long – 1/4″ Width; 4 Hook Tooth - All bandsaw blades are folded into 3 rings to avoid bulky packaging, the picture depicted represents one blade the pricing is for one blade/package. 7-1/2 inch, 5′ 7-1/2″ ) bandsaw blades suit the following models 10″ rikon 10-300 jet jwbs-10os. The type of tooth pattern used depends on the thickness of metal material to be cut. E. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed 67-1/2 inch ( 5 ft. It can cut all types of woods and is especially ideal for soft woods i. E. Use 24 raker to cut 1/16″ to 1/4″ thick material, use 18 raker to cut 1/8″ to 3/8″ thick material, use 14 raker to cut 3/16″ to 7/16″ thick material, use 10 raker to cut 1/4″ to 5/8″ thick material, use 6 hook to cut 3/8″ to 2″ thick material, use 4 hook to cut 3/4″ to 4-1/2″ thick material, use 3 hook to cut 1″ to 6″ thick material, use 2 hook to cut 2″ to 12″ thick material, note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Carbon tool steel bandsaw blades are made from high end carbon steel. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. It is also used for cutting plastics, aluminum, metals, and mild steel. Pine, polar, fir and spruce. In order to cut metal materials, the following is a guideline for choosing the adequate tooth pattern of a carbon tool steel bandsaw blade. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Steel).

 

Magnate M72C14H4 Carbon Tool Steel Bandsaw Blade, 72″ Long – 1/4″ Width; 4 Hook Tooth - For wood or metal cutting 1/4″ width 24 raker tooth 0025″ thickness. Blade has 4-teeth per inch. For wood or metal cutting 1/8″ width 18 raker tooth 0025″ thickness 0047″ kerf. Replacement blade for hitachi model cb75f 14-1/2-inch resaw band saw. For wood or metal cutting 3/16″ width 14 raker tooth 0025″ thickness. Cones with a 30-day limited warranty. Replacement blade for hitachi cb75f 14-1/2inch resaw band saw. For wood or metal cutting 1/4″ width 4 hook tooth 0025″ thickness 0047″ kerf.

 

Magnate M80C38R24 Carbon Tool Steel Bandsaw Blade, 80″ Long – 3/8″ Width; 24 Raker Tooth - Pine, polar, fir and spruce. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. E. E. It is also used for cutting plastics, aluminum, metals, and mild steel. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 80 inch ( 6 ft. 2, if the owner’s manual is not available, refer to previous invoices. Carbon tool steel bandsaw blades are made from high end carbon steel. Steel). Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. The picture depicted represents one blade the pricing is for one blade/package. It can cut all types of woods and is especially ideal for soft woods i. 8 inch, 6′ 8″ ) bandsaw blades suit the following models sears craftsman 9ht2433n, 9ht2331n, 2428, 24331n, 24393n industrial 12″, 113 angle head atlas general international 90-060 m1 (woodworking) if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced.

 

Magnate M80C38R10 Carbon Tool Steel Bandsaw Blade, 80″ Long – 3/8″ Width; 10 Raker Tooth - It is also used for cutting plastics, aluminum, metals, and mild steel. E. It can cut all types of woods and is especially ideal for soft woods i. Carbon tool steel bandsaw blades are made from high end carbon steel. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Steel). 2, if the owner’s manual is not available, refer to previous invoices. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 80 inch ( 6 ft. 8 inch, 6′ 8″ ) bandsaw blades suit the following models sears craftsman 9ht2433n, 9ht2331n, 2428, 24331n, 24393n industrial 12″, 113 angle head atlas general international 90-060 m1 (woodworking) if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. The picture depicted represents one blade the pricing is for one blade/package. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Pine, polar, fir and spruce. E.

 

Magnate M133C114H2 Carbon Tool Steel Bandsaw Blade, 133″ Long – 1-1/4″ Width; 2 Hook Tooth - The picture depicted represents one blade the pricing is for one blade/package. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. 1 inch, 11′ 1″ ) bandsaw blades suit the following models jet jwbs-18 18″ dayton 2ac29 18″ rikon 10-336 grizzly g8146z (133-3/4″ to 136-1/4″) if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. It can cut all types of woods and is especially ideal for soft woods i. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 133 inch ( 11 ft. Pine, polar, fir and spruce. Steel). Carbon tool steel bandsaw blades are made from high end carbon steel. E. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. 2, if the owner’s manual is not available, refer to previous invoices. E. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. 3, cut your old bandsaw blade so that it lies flat. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. It is also used for cutting plastics, aluminum, metals, and mild steel.

 

Magnate M62C38R24 Carbon Tool Steel Bandsaw Blade, 62″ Long – 3/8″ Width; 24 Raker Tooth - Steel). Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. It is also used for cutting plastics, aluminum, metals, and mild steel. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 62 inch ( 5 ft. Carbon tool steel bandsaw blades are made from high end carbon steel. The picture depicted represents one blade the pricing is for one blade/package. E. Pine, polar, fir and spruce. It can cut all types of woods and is especially ideal for soft woods i. 2 inch, 5′ 2″ ) bandsaw blades suit the following models skil 3104 sears craftsman 103-24556, 2442 9ht2442n central machinery d0686-4bmf, 01629-icea mark 1 rexon bs-12 alltrade 1996bbr powerline dbs-12 jet dbs-12 black & decker (some models) grizzly g8976 12″ walker-turner 10″ if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the. E. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc.

 

Magnate M62C38R18 Carbon Tool Steel Bandsaw Blade, 62″ Long – 3/8″ Width; 18 Raker Tooth - 2 inch, 5′ 2″ ) bandsaw blades suit the following models skil 3104 sears craftsman 103-24556, 2442 9ht2442n central machinery d0686-4bmf, 01629-icea mark 1 rexon bs-12 alltrade 1996bbr powerline dbs-12 jet dbs-12 black & decker (some models) grizzly g8976 12″ walker-turner 10″ if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the. E. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Carbon tool steel bandsaw blades are made from high end carbon steel. Pine, polar, fir and spruce. The picture depicted represents one blade the pricing is for one blade/package. Steel). It is also used for cutting plastics, aluminum, metals, and mild steel. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 62 inch ( 5 ft. It can cut all types of woods and is especially ideal for soft woods i. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. E. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i.

 

Magnate M62C12R14 Carbon Tool Steel Bandsaw Blade, 62″ Long – 1/2″ Width; 14 Raker Tooth - Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Carbon tool steel bandsaw blades are made from high end carbon steel. E. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 62 inch ( 5 ft. Pine, polar, fir and spruce. E. 2 inch, 5′ 2″ ) bandsaw blades suit the following models skil 3104 sears craftsman 103-24556, 2442 9ht2442n central machinery d0686-4bmf, 01629-icea mark 1 rexon bs-12 alltrade 1996bbr powerline dbs-12 jet dbs-12 black & decker (some models) grizzly g8976 12″ walker-turner 10″ if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the. It is also used for cutting plastics, aluminum, metals, and mild steel. The picture depicted represents one blade the pricing is for one blade/package. Steel). Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. It can cut all types of woods and is especially ideal for soft woods i. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i.

 

Magnate M92C38H3 Carbon Tool Steel Bandsaw Blade, 92″ Long – 3/8″ Width; 3 Hook Tooth - It can cut all types of woods and is especially ideal for soft woods i. Pine, polar, fir and spruce. 2, if the owner’s manual is not available, refer to previous invoices. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 92 inch ( 7 ft. 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. 8 inch, 7′ 8″ ) bandsaw blades suit the following models enco 199-9001 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Steel). E. Carbon tool steel bandsaw blades are made from high end carbon steel. E. It is also used for cutting plastics, aluminum, metals, and mild steel. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. This method will provide the mos. The picture depicted represents one blade the pricing is for one blade/package. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results.

 

Magnate M70.5C14R18 Carbon Tool Steel Bandsaw Blade, 70-1/2″ Long – 1/4″ Width; 18 Raker Tooth - Pine, polar, fir and spruce. It can cut all types of woods and is especially ideal for soft woods i. 3, cut your old bandsaw blade so that it lies flat on a level sur. E. Steel). Carbon tool steel bandsaw blades are made from high end carbon steel. 2, if the owner’s manual is not available, refer to previous invoices. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. It is also used for cutting plastics, aluminum, metals, and mild steel. 10-1/2 inch, 5′ 10-1/2″ ) bandsaw blades suit the following models craftsman 10″ 921400 atlas workshop 9360, 912 rikon 10-305 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. E. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 70-1/2 inch ( 5 ft. The picture depicted represents one blade the pricing is for one blade/package. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results.

 

Magnate M80C14R24 Carbon Tool Steel Bandsaw Blade, 80″ Long – 1/4″ Width; 24 Raker Tooth - Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 80 inch ( 6 ft. E. E. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. It can cut all types of woods and is especially ideal for soft woods i. Carbon tool steel bandsaw blades are made from high end carbon steel. Pine, polar, fir and spruce. It is also used for cutting plastics, aluminum, metals, and mild steel. The picture depicted represents one blade the pricing is for one blade/package. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Steel). 8 inch, 6′ 8″ ) bandsaw blades suit the following models sears craftsman 9ht2433n, 9ht2331n, 2428, 24331n, 24393n industrial 12″, 113 angle head atlas general international 90-060 m1 (woodworking) if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. 2, if the owner’s manual is not available, refer to previous invoices.

 

Magnate M57C14R18 Carbon Tool Steel Bandsaw Blade, 57″ Long – 1/4″ Width; 18 Raker Tooth - Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. The picture depicted represents one blade the pricing is for one blade/package. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Pine, polar, fir and spruce. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. Steel). It is also used for cutting plastics, aluminum, metals, and mild steel. 9 inch, 4′ 9″ ) bandsaw blades suit the following models central machinery d4473-obmb black & decker 12″ duracraft bbs4i2, v5312 shopcraft t676020 nuway 12″ if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. 2, if the owner’s manual is not available, refer to previous invoices. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, 57 inch ( 4 ft. 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. Carbon tool steel bandsaw blades are made from high end carbon steel. It can cut all types of woods and is especially ideal for soft woods i. E. E. This method will provide the most possible ac. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i.

 

Magnate M70.5C38R24 Carbon Tool Steel Bandsaw Blade, 70-1/2″ Long – 3/8″ Width; 24 Raker Tooth - The picture depicted represents one blade the pricing is for one blade/package. Pine, polar, fir and spruce. It can cut all types of woods and is especially ideal for soft woods i. E. E. 10-1/2 inch, 5′ 10-1/2″ ) bandsaw blades suit the following models craftsman 10″ 921400 atlas workshop 9360, 912 rikon 10-305 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. Steel). 3, cut your old bandsaw blade so that it lies flat on a level sur. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. It is also used for cutting plastics, aluminum, metals, and mild steel. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 70-1/2 inch ( 5 ft. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Carbon tool steel bandsaw blades are made from high end carbon steel. 2, if the owner’s manual is not available, refer to previous invoices. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i.

 

Magnate M92.5C38R10 Carbon Tool Steel Bandsaw Blade, 92-1/2″ Long – 3/8″ Width; 10 Raker Tooth - 8-1/2 inch, 7′ 8-1/2″ ) bandsaw blades suit the following models jet j-8203k powerline mark 1 shopcraft 28-283f mit 5125 american industrial amt 4113 enco 505-1372 (models 8201, 8203, 8201vs and 8203vs), 199-9013, 199-9011, 199-9001 dayton 3z981 central machinery 32206-ocea, 32208-ocea, 5687-ocea, 2146-3bmf, 00580-ocea nu-mark 14″ united 14″ wilton tradesman 8201, 8203, 8201vs, 8203vs grizzly g0580x g0555x (92-1/2″ to 93-1/2″) 14″ ohio fo. It is also used for cutting plastics, aluminum, metals, and mild steel. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Steel). Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 92-1/2 inch ( 7 ft. E. Carbon tool steel bandsaw blades are made from high end carbon steel. It can cut all types of woods and is especially ideal for soft woods i. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Pine, polar, fir and spruce. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. The picture depicted represents one blade the pricing is for one blade/package. E.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.