MKT 263830SP Sup-R-Stud Zinc Wedge Anchor, 3/8″ x 3″ (Pack of 20)
- Hole diameter equals anchor diameter. Excellent for setting immediate can be loaded immediately. Simple installation can be set in a bottomless hole. Made in usa. Approvals icc esr-3235 / gsa spec ff-s-325c, group ii, type 4, class 1 / metro dade nca no 10-09280.
Powers Fastening Innovations 07322 Power-Stud 1/2-Inch by 3-3/4-Inch Type 304 Stainless Steel Wedge Expansion Anchor, 50 Per Box
- Powers fasteners is the leading supplier of concrete and masonry anchors in north america and has been a leader in the fastening industry since 1921. Powers is an iso-9001 international anchoring products company with extensive expertise in the following groups mechanical anchors, adhesive, light duty, roofing and carbide drill bits. .
2 Pack Simpson Strong Tie WA50812 1/2″ x 8-1/2″ Wedge-All Wedge Anchor 25 per Box
- A one-piece clip ensures uniform holding capacity that increases as tension is applied. . The wedge-all is a non-bottom bearing, wedge style expansion anchor for use in solid concrete or grout filled masonry.
The Hillman Group 370980 Wedge Anchor, 1/4 X 2-1/4-Inch, 40-Pack
- Has various dot approvals including cal trans listing for “stud mechanical expansion anchors”. . The power-stud is a torque controlled, wedge expansion anchor that is designed for concrete applications. It is building code approved and can also be used with treated lumber.
Wedge Anchor 304 Stainless Steel – 3/8″-16 x 3″ Qty-10
- Wedge anchors, concrete anchors, or masonry anchors are designed to be installed into solid concrete. Wedge anchors cannot be used on brick or block. Wedge anchors can be used to fasten objects to concrete. These anchors can be used for some of the following concrete applications shelving, railing, duct work, signs, electric pipe, light fixtures, escalators, etc.
Hard-to-Find Fastener 014973237172 3/8 x 3-3/4 Concrete Wedge Anchor (50 Pieces)
- We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. We stock a wide variety of fasteners ideal for many applications arround the home, farm, business, automotives, and in industry. We also sell coated and stainless products for additional rust resistance. Most of our fasteners have a light zinc plating over steel giving a more rust resistant finsh. Not all fasteners are applicable for all applications so be certain to test thouroughly and get the opinion of a licensed builder or certified building or structural engineer before relying on these fasteners for any situations where failure would result in damage to property or person.
Hard-to-Find Fastener 014973443153 Wedge Anchors, 1/2 x 7-Inch
- Most of our fasteners have a light zinc plating over steel giving a more rust resistant finsh. . Not all fasteners are applicable for all applications so be certain to test thouroughly and get the opinion of a licensed building or certified building or structural engineer before relying on these fasteners for any situations where failure would result in damage to property or person. We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. We also sell coated and stainless products for additional rust resistance. We stock a wide variety of fasteners ideal for many applications arround the home, farm, business, automotives, and in industry.
Simpson Strong Tie STB2-50100 1/2-Inch by 10-Inch Bolt Wedge Anchor for Cracked and Uncracked Concrete, 25-Pack
- . The strong-bolt is wedge anchor designed for optimum performance in both cracked and uncracked concrete a requirement that the 2009 ibc places on post-installed anchors. The proprietary tri-segmented clip has dual undercutting embossments on each segment which enable secondary or follow-up expansion if a crack forms and intersects the anchor location. The strong-bolt anchor is proven to offer increased reliability in the most adverse conditions, including cracked concrete under static and seismic loading.
The Hillman Group 370987 Wedge Anchor, 1/2 X 2-3/4-Inch, 12-Pack
- Has various dot approvals including cal trans listing for “stud mechanical expansion anchors”. . It is building code approved and can also be used with treated lumber. The power-stud is a torque controlled, wedge expansion anchor that is designed for concrete applications.
1/2″-13×3 3/4″ COMMERCIAL WEDGE ANCHORS ZINC CR+3 | (QUANTITY: 50)
- Concrete wedge anchor for 3/4 in (19mm) hole with swiveling d-ring. Jet fitting & supply corporation has been providing fasteners since 1946 feel safe when buying from jet. Portable and reusable anchor can be removed and simply re-installed in a new location for added jobsite flexibility and lower overall cost of ownership. Virtually eliminates the need for tools to remove a stuck anchor from the hole, giving the user instant mobility. Installation is simple and efficient, taking just seconds utilizing standard concrete tools. Provides a safe, fall arrest rated 5,000-pound anchor point for vertical or overhead/ceiling applications. Device can be removed and simply re-installed in a new loaction for added jobsite flexibility and lower overall cost of ownership. Unique forged connection ring provides a compatible tie-off point for your personal fall arrest system for added safety. A built-in d-ring provides a compatible connection for your fall protection system and swivels keeping your connecting component in-line at all times. The anchor can be used in mulitple orientations for added jobsite versatility and flexibility.
1″-8×12″ COMMERCIAL WEDGE ANCHORS ZINC CR+3 | (QUANTITY: 5)
- Jet fitting & supply corporation has been providing fasteners since 1946 feel safe when buying from jet. Required hole diameter equals anchor diameter. Can be set in a bottomless hole. Can be loaded immediately. Excellent for setting immediately.
Wedge Anchor 304 Stainless Steel – 1/2″-13 x 4-1/4″ Qty-10
- Wedge anchors can be used to fasten objects to concrete. Wedge anchors, concrete anchors, or masonry anchors are designed to be installed into solid concrete. Wedge anchors cannot be used on brick or block. These anchors can be used for some of the following concrete applications shelving, railing, duct work, signs, electric pipe, light fixtures, escalators, etc.
3M Protecta PRO 2190053 Concrete Wedge Anchor, For 3/4″ Hole, with Swiveling D-Ring, Silver/Gold
- A built-in d-ring provides a compatible connection for your fall protection system and swivels keeping your connecting component in-line at all times. Installation is simple and efficient, taking just seconds utilizing standard concrete tools. Unique forged connection ring provides a compatible tie-off point for your personal fall arrest system for added safety. Portable and reusable anchor can be removed and simply re-installed in a new location for added jobsite flexibility and lower overall cost of ownership. Device can be removed and simply re-installed in a new loaction for added jobsite flexibility and lower overall cost of ownership. Provides a safe, fall arrest rated 5,000-pound anchor point for vertical or overhead/ceiling applications. Exclusive quick-release button boost productivity by providing immediate anchor removal for added worker satisfaction. The anchor can be used in mulitple orientations for added jobsite versatility and flexibility. Concrete wedge anchor for 3/4 in (19mm) hole with swiveling d-ring. Virtually eliminates the need for tools to remove a stuck anchor from the hole, giving the user instant mobility.
Strong Bolt STB2-62700 Wedge Anchor 5/8-Inch by 7-Inch, 20-Piece
- . Following rigorous testing according to icc-es acceptance criteria, the strong-bolt 2 anchor received classification as a category 1 anchor, the highest attainable anchor category for performance in cracked concrete under static and seimic loading. Code listed by icc-es under the 2009 ibc requirements for post-installed anchors in cracked and uncracked concrete. The strong-bolt 2 wedge anchor is the next generation solution for cracked and uncracked concrete.
Simpson Strong Tie STB2-50334 1/2-Inch by 3-3/4-Inch Bolt Wedge Anchor for Cracked and Uncracked Concrete, 25-Pack
- The strong-bolt anchor is proven to offer increased reliability in the most adverse conditions, including cracked concrete under static and seismic loading. The strong-bolt is wedge anchor designed for optimum performance in both cracked and uncracked concrete a requirement that the 2009 ibc places on post-installed anchors. The proprietary tri-segmented clip has dual undercutting embossments on each segment which enable secondary or follow-up expansion if a crack forms and intersects the anchor location.
Strong Bolt STB2-50512 Wedge Anchor 1/2-Inch by 5-1/2-Inch, 25-Piece
- Code listed by icc-es under the 2009 ibc requirements for post-installed anchors in cracked and uncracked concrete. Following rigorous testing according to icc-es acceptance criteria, the strong-bolt 2 anchor received classification as a category 1 anchor, the highest attainable anchor category for performance in cracked concrete under static and seimic loading. . The strong-bolt 2 wedge anchor is the next generation solution for cracked and uncracked concrete.
The Hillman Group 370984 Wedge Anchor, 3/8 X 3-Inch, 25-Pack
- The power-stud is a torque controlled, wedge expansion anchor that is designed for concrete applications. . It is building code approved and can also be used with treated lumber. Has various dot approvals including cal trans listing for “stud mechanical expansion anchors”.
Strong Bolt STB2-50700 Wedge Anchor 1/2-Inch by 7-Inch, 25-Piece
- Code listed by icc-es under the 2009 ibc requirements for post-installed anchors in cracked and uncracked concrete. The strong-bolt 2 wedge anchor is the next generation solution for cracked and uncracked concrete. Following rigorous testing according to icc-es acceptance criteria, the strong-bolt 2 anchor received classification as a category 1 anchor, the highest attainable anchor category for performance in cracked concrete under static and seimic loading.
Wej-It Ankr-TITE ATSS Wedge Anchor, 316 Stainless Steel, Meets QQZ-325Z Type II Class 3 and GSA FFS-325 Group II Type 4 Class 1 Specifications, 5/8″ Diameter, 6″ Length, 4″ Threaded Length (Pack Of 5)
- Anchor consists of a 316 stainless steel body, washer, nut, and clip to provide more corrosion resistance than steel and 304 stainless steel anchors. Ultimate tensile strength is 9,527 lb at 2-5/8″ embedment depth in 4,000-psi concrete with a static load. Wedge anchor provides a secure hold in solid masonry and uncracked concrete. Meets fed specs qqz-325z type ii class 3 and gsa ffs-325 group ii type 4 class 1, and complies with miami-dade noa #08-091102 code. Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
WA373004SS 3/8″ x 3″ Wedge-All 304/303 Stainless Steel Wedge Anchors 50/pk
- Length 7 inches. 3/8″ x 3-3/4″ wedge anchor. Drill size 1/2 inch. Finish hot dip galvanized. Material steel.
5/16″ X 5″ Wedge Anchor
- Use in solid concrete, brick and stone. Includes nut and washer. 5/16″ x 5″ wedge anchor.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
