Foredom Jacobs Chuck Key
- Standard chuck key for most foredom handpieces and other drills. Picture is for reference only.
Jacobs Chuck 31414 High Torque and Precision Keyless Drill Chuck with Integrated Shank, MT3 Mount, 0.630″ Maximum Capacity, 2-1/8″ Diameter x 3-25/32″ Closed Length
- Chuck-arbor is integrated into the internal socket of the drill chuck. It makes impossible for the arbor and the drill chuck to become accidentally separated, providing a unit of greater rigidity and precision with. 100 percent individually controlled to ensure not to exceed a maximum total integrated run-out of 00016-inch. Right handed operation only. Self tightening feature automatically increases gripping force proportional to increased torque to prevent tool shank slippage.
SEPTLS4033637 – Jacobs chuck T-Handle Chuck Keys – 3637
- Handle type, t-handle. Wt, 004 lb. Type, key.
Jacobs 14865 36KD Heavy Duty Plain Bearing Keyed Chuck Equipped with Positive Drive Slot. 5.0 to 20.3 Millimeter Capacity with No.3 Jacobs Taper Mount
- Heavy duty models for taper mounting tir 0004-inch maximum at half capacity. Each chuck 100-percent inspected for performance and precision. Through-hardened sleeve teeth, plus hardened nose and keyholes provide outstanding wear resistance. One-piece sleeve eliminates crack between driving teeth often found in other designs. Jaws center-ground for absolute straightness and alignment.
Jacobs Chuck 3643 1 Series Stainless Steel T-handle Chuck Key
- Never apply extensions, pliers, wrenches or ‘cheaters’ of any kind to chuck key handles. Nickel thumb grip styles increase leverage and user comfort. Self-ejecting models with spring-loaded ejectors ensure key disengagement after tightening. Do not subject chuck key handles to hammer or other impact blows. Soft steel handles limit the potential for dangerous fracturing under excessive load.
AIRCAT 4338 3/8-Inch Red Composite Reversible Power Drill With Jacobs Chuck
- Its ergonomically engineered handle is designed to relieve stress and fatigue on user’s hands, wrists and arms. The aircat acr4314r air drill features a low noise level of only 85db yet delivers the power you need to get the job done.
Jacobs Chuck 30243D Multi-Craft Drill Chuck, 0.25″ Maximum Capacity, 1-1/8″ Sleeve Diameter, 2-1/64″ Close Length
- 2-1/64-inches close and 1-37/64-inches open length. Jacobs chuck multi-craft drill chuck. 3/8″-24 thread chuck mount and kg1 key number. 0. 1-1/8-inches sleeve diameter. 028-inches minimum and 0. 25-inches maximum capacity. Through-hardened jaws for hard, wear resistant gripping surfaces.
Jacobs Chuck 7347D Threaded Shank to Morse Taper Arbor, 2 Morse 5/8″-16 Mount, 4-3/16″ Length
- 4-3/16-inches length. Shank type 2 morse taper. Jacobs chuck threaded shank to morse taper arbor. 5/8″-16 arbor thread. 11/16 threaded extension (l-1). Ideal for use with custom tool and work holder designs and for specialized machining applications. Precision machined and ground to master gages for maximum performance with jacobs drill and tap chucks.
Jacobs 31050 3000 Series 3/8-Inch SoftGrip Sleeve Keyless Drill Chuck with 3/8 to 24 Mount
- Upgrade it now, and get a better grip the jacobs 31050 3000 series softgrip 3/8-inch keyless drill chuck comes with one year factory warranty. With this patented softgrip sleeve design, the jacobs 31050 3000 series softgrip 3/8-inch keyless chuck not only increases the comfort level when tightening the bit, but also prevents hands from being irritated during frequent tightening. Technical details 3/8-inch capacity (1. More importantly, the jacobs 31050 3000 series softgrip 3/8-inch keyless drill chuck allows users to apply more input torque, therefore, more output torque is applied to the drill bit, which eliminates the bit slippage problem. The patented softgrip sleeve allows users to tighten the drill bit faster and easier. This jacobs 3000 series softgrip 3/8-inch keyless chuck is noticeably easier to grip than a traditional hard metal or plastic chuck. The jacobs 31050 3000 series softgrip 3/8-inch keyless drill chuck with 3/8 to 24 threaded mount is one of the best drill chucks for 3/8-inch rotary drills. 0 to 10 mm) 3/8 to 24 threaded mount patented softgrip sleeve for easier tightening and better grip torque more comfortable from the manufacturer get a better grip.
Jacobs 31051 1/2″ SoftGrip Single Sleeve Keyless Drill Chuck
- Soft sleeve resists surface marring. The jacobs chuck softgrip 1/2 in. . Steel keyless drill chuck designed for comfortable use, even during frequent tightening. Ideal for rotary drills and can also be used on hammer drills faster bit change, helps user to tighten bits quickly and easily steel construction for strength and durability helps make it easy to apply more input torque to help reduce bit slippage for 1/2″ drills with a spindle lock 1/16″, 1/2″ capacity 1/2-20 (13mm) mount fits 1/2″ dewalt, black & decker, milwaukee, makita, skil, bosch, craftsman and most major brands. Single-sleeve design.
KD Tools (KDT31136) K3 Jacobs Chuck Key by KD Tools
- Chuck key for 3jt. Ships from 1 of 10 warehouses around the country you get your tools fast with standard shipping. Chuck keys. Professional. Electric and cordless tools.
Jacobs Chuck 30221D Ball Bearing Taper Mount Chuck, 0.5″ Maximum Capacity, 2-7/16″ Sleeve Diameter, 3-7/8″ Close Length
- 2-7/16-inches sleeve diameter. 04-inches minimum and 0. 003-inches maximum at half capacity. 3jt mount and k3 key number. 3-7/8-inches close and 2-31/32-inches open length. One-piece sleeve eliminates crack between driving teeth often found in other designs. Tir 0. 0. 5-inches maximum capacity. Through-hardened sleeve teeth plus hardened nose and keyholes provide outstanding wear resistance. Jacobs chuck ball bearing taper mount chuck.
Jacobs 3653 K3C Thumb Handle Chuck Key with 5/16-Inch Pilot-Size for Jacobs Series 34-33C ,633C Keyed Chucks
- Dimensions overall product weight -0. 2 pounds. 403-3653 features -soft steel handles. -Precision crafted. Product type -chuck keys. -Handle type thumb.
Jacobs Chuck 30247 3/8-Inch Keyed Chuck for 3/8-Inch 24 Thread Spindle with Key
- This are highly durable. This is manufactured in china. This are hex keys.
SEPTLS40330598 – Jacobs chuck Multi-Craft Drill Chucks – 30598
- Bit/blade mounting size, 0078 in [min], 1/2 in [max]. Housing diam, 1600 in. Mounting, threaded 3/8-24. Key size, kk. Type, keyed chuck.
Jacobs Chuck 33351 Heavy Duty Thread Mounted Chuck, 1/2-20 Mount, 0.625″ Maximum Capacity, 2-3/64″ Diameter x 3-33/64″ Closed Length
- Through hardened sleeve teeth, plus hardened nose and keyholes provide outstanding wear resistance. Each chuck 100 percent inspected for performance and precision. Jaws center ground for absolute straightness and alignment. One piece sleeve eliminates crack between driving teeth often found in other designs. Tir 0004-inch maximum at half capacity.
Jacobs Chuck 9757 Rubber Flex Die Grinder Collet, 3/32″-11/64″ Capacity, 15/32″ Contact Length, 19/32″ OD
- 19/32-inches outside diameter. Rubber flex die grinder collet. 3/32-inches minimum capacity, 11/64-inches maximum capacity. Number of inserts 6. 15/32-inches contact length. 26 degree cone angle.
Jacobs 3655 K4 Thumb Handle Chuck Key with 3/8-Inch Pilot-Size for Jacobs Series 36 ,16N, 18N Keyed Chucks
- Soft steel handles limit the potential for dangerous fracturing under excessive load. Nickel thumb grip styles increase leverage and user comfort.
Jacobs Chuck 14451 Heavy Duty Plain Bearing Taper Mounted Chuck, 0.5″ Maximum Capacity, 2″ Sleeve Diameter, 3-45/64″ Close Length
- It has smooth sleeve with locking collar. Jaws center-ground for absolute straightness and alignment. Heavy duty plain bearing taper mounted chuck. One-piece sleeve eliminates crack between driving teeth often found in other designs. Each chuck 100 percent inspected for performance and precision.
Jacobs Chuck 31248 Hex Bit Adapter Keyless Chuck, 1/4″ Mount, 3/8″ Capacity
- Plastic front and metal rear sleeves for greater durability. Quick change chuck attachment enables impact drivers to be used in drill applications. Converts an impact driver into a drill. Fits all round shank bits. Ideal for drilling holes and hard-to-reach spaces.
Jacobs Chuck 30605 1/4″ and 3/8″ Chuck Key with 1/4″ Pilot
- Precision crafted for exact fit. Soft steel handles limit the potential for dangerous fracturing under excessive loads. Backed by jacobs warranty. Nickel humb grip styles increase leverage and user comfort.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
