21 Most Wanted Carbide Tipped Saws

 

Makita A-94904 Tungsten Carbide Tipped Saw Blade 5-38-Inch 16Tooth

Makita A-94904 Tungsten Carbide Tipped Saw Blade 5-3/8-Inch 16Tooth

Makita A-94904 Tungsten Carbide Tipped Saw Blade 5-3/8-Inch 16Tooth - Makita a-94904 specifications diameter 5-3/8″ arbor 5/8″ teeth 16makita a-94904 features ideal for general purpose cuts the thin kerf design works well for a lighter cutting load and aids in the elimination of wasted material the precision-ground teeth enable a clean cutting surface and promote a longer blade life applications general purpose, trim cutting, wood cutting, fiber cement cutting.

 

Tenryu SL-16552 6-12 Carbide Tipped Saw Blade  52 Tooth ATAF Grind - 58Ko Arbor - 0063 Kerf

Tenryu SL-16552 6-1/2″ Carbide Tipped Saw Blade ( 52 Tooth ATAF Grind – 5/8″Ko Arbor – 0.063 Kerf)

Tenryu SL-16552 6-1/2″ Carbide Tipped Saw Blade ( 52 Tooth ATAF Grind – 5/8″Ko Arbor – 0.063 Kerf) - High-grade, c-3, fine-grain tungsten carbide tips resist erosion for extended blade life. Thin kerf for less waste and lighter cutting performance (reduced feed pressure). Aggressive rake angles for maximum cutting speed and efficiency. Fully hardened, expertly tensioned tool steel bodies absorb impact, remain flat and true, and resist excess heat build-up. Each tip is precision honed on all four exposed surfaces this minimizes micro-chipping along the sharp edge of the blade and results in a sharper, longer-lasting edge.

 

Timberline 10040-30 Ti-Cut General Purpose and Finishing 10-Inch Diameter by 40-Teeth by 30mm Bore ATB Grind Thin Kerf Carbide Tipped Saw Blade

Timberline 10040-30 Ti-Cut General Purpose and Finishing 10-Inch Diameter by 40-Teeth by 30mm Bore, ATB Grind Thin Kerf Carbide Tipped Saw Blade

Timberline 10040-30 Ti-Cut General Purpose and Finishing 10-Inch Diameter by 40-Teeth by 30mm Bore, ATB Grind Thin Kerf Carbide Tipped Saw Blade - 10-inch dia, 40-teeth. Carbide tipped, professional quality. Thin kerf. 18-degree hook angle, 30mm bore, atb grind. Designed to cut softwood, hardwood & plywood.

 

Tenryu MP-30580CB 12 Carbide Tipped Saw Blade  80 Tooth ATAF Grind - 1 Arbor - 0118 Kerf

Tenryu MP-30580CB 12″ Carbide Tipped Saw Blade ( 80 Tooth ATAF Grind – 1″ Arbor – 0.118 Kerf)

Tenryu MP-30580CB 12″ Carbide Tipped Saw Blade ( 80 Tooth ATAF Grind – 1″ Arbor – 0.118 Kerf) - These are our cadillac/mercedes grade miter saw blades. Tenryu responds to customer demand we now have a line of blades specially designed for high performance and heavier duty applications on miter saws, slide-miter saws and radial arm saws. Zero degree hook angle prevents lifting of workpiece but does not make your saw overwork. Tenryu’s proven, super-true, laser-cut, hand tensioned steel plate with new and improved, patented, resin bond-filled expansion slots ensures smooth, accurate and quiet cuts. Specially designed, top-quality, micrograin carbide tips, honed to a precision edge with 600 grit diamond wheels cut clean and easy. The result is a safe, chip-free and smooth cut.

 

Tenryu AC-30580DN 12 Carbide Tipped Saw Blade  80 Tooth TCG Grind - 1 Arbor - 011 Kerf

Tenryu AC-30580DN 12″ Carbide Tipped Saw Blade ( 80 Tooth TCG Grind – 1″ Arbor – 0.11 Kerf)

Tenryu AC-30580DN 12″ Carbide Tipped Saw Blade ( 80 Tooth TCG Grind – 1″ Arbor – 0.11 Kerf) - Industrial quality for professional or consumer use. Thickness of steel. Coil measures 22mm.

 

Timberline 175-40C Specialty All Purpose Diamond Knockout ATB Grind Thin Kerf Carbide Tipped Saw Blade

Timberline 175-40C Specialty All Purpose Diamond Knockout ATB Grind Thin Kerf Carbide Tipped Saw Blade

Timberline 175-40C Specialty All Purpose Diamond Knockout ATB Grind Thin Kerf Carbide Tipped Saw Blade - Black&decker, bosch, dewalt, hitachi, jepson, makita, milwaukee, porter-cable, ryobi, skil. . All blades fit popular portable 7-1/4″ electric & worm drive circular saws. A durable series of blades designed for the contractors and do-it-yourselfers. These are very popular all-purpose blades used for ripping and cross cutting wood framing, decking and plywood.

 

Neiko 30T Carbide Tipped Saw Blade for Wood 4 38

Neiko 30T Carbide Tipped Saw Blade for Wood 4 3/8″

Neiko 30T Carbide Tipped Saw Blade for Wood 4 3/8″ - High performance triple chip tungsten carbide tipped saws. 10 piece carbide-tipped electrician’s hole saw kit. Features extended life when used to cut wood, pvc, man-made building materials, and fiberglass. Provides superior performance on materials too hard or abrasive for conventional high speed steel saws. Kit includes (6) 7/8-inches, 1-1/8-inches, 1-3/8-inches, 1-3/4-inches, 2-inches, 2-1/2-inches carbide tipped hole saws (2) xa1, xa2 arbors (1) a12 arbor adapter (1) a7 ejector spring and case.

 

Freud SD206C18 6 Diameter X 18 Thick X 2T Chipper Carbide-Tipped Saw Blade With 58 Arbor For Freud SD206 Dado Set

Freud SD206C18 6″ Diameter X 1/8″ Thick X 2T Chipper Carbide-Tipped Saw Blade With 5/8″ Arbor For Freud SD206 Dado Set

Freud SD206C18 6″ Diameter X 1/8″ Thick X 2T Chipper Carbide-Tipped Saw Blade With 5/8″ Arbor For Freud SD206 Dado Set - Outside blades and chippers are made to the same exacting standards or quality as the original set. Application use on all table saws and radial arm saws for cutting slots, grooves, dadoes, and rabbets in softwood, or hardwood. . Wider cuts freud’s precision shim set and additional chippers are available. Freud dado sets are built to last through many years of sharpening and use. Accidents like dropping a chipper do happen and freud offers a full range of replacement parts.

 

Tenryu PT-20360 8 Carbide Tipped Saw Blade  60 Tooth ATAF Grind - 58 Arbor - 0087 Kerf

Tenryu PT-20360 8″ Carbide Tipped Saw Blade ( 60 Tooth ATAF Grind – 5/8″ Arbor – 0.087 Kerf)

Tenryu PT-20360 8″ Carbide Tipped Saw Blade ( 60 Tooth ATAF Grind – 5/8″ Arbor – 0.087 Kerf) - Cost per cut compare to abrasives is less. Cold cutting. Ferrous metal and cement.

 

Ace Carbide-tipped Saw Blade 2126704

Ace Carbide-tipped Saw Blade (2126704)

Ace Carbide-tipped Saw Blade (2126704) - For fine cutting applications. Manufacturer number 2126704. Premium carbide. Sold as one unit. Carded. Lasts 10 times longer than steel blades. ) 12″ dia. Country of origin (tba). 1″ arbor. 80 teeth. (1 unit = each. Distributed by american emblem tool co. Sku # 2126704.

 

Tenryu PT-11536 4-12 Carbide Tipped Saw Blade  36 Tooth ATAF Grind - 38 Arbor - 0063 Kerf

Tenryu PT-11536 4-1/2″ Carbide Tipped Saw Blade ( 36 Tooth ATAF Grind – 3/8″ Arbor – 0.063 Kerf)

Tenryu PT-11536 4-1/2″ Carbide Tipped Saw Blade ( 36 Tooth ATAF Grind – 3/8″ Arbor – 0.063 Kerf) - Each tip is precision honed on all four exposed surfaces this minimizes micro-chipping along the sharp edge of the blade and results in a sharper, longer-lasting edge. Aggressive rake angles for maximum cutting speed and efficiency. High-grade, c-3, fine-grain tungsten carbide tips resist erosion for extended blade life. Fully hardened, expertly tensioned tool steel bodies absorb impact, remain flat and true, and resist excess heat build-up. Thin kerf for less waste and lighter cutting performance (reduced feed pressure).

 

Makita A-96095 MetalGeneral Purpose 32T Carbide-Tipped Saw Blade 5-78

Makita A-96095 Metal/General Purpose 32T Carbide-Tipped Saw Blade, 5-7/8″

Makita A-96095 Metal/General Purpose 32T Carbide-Tipped Saw Blade, 5-7/8″ - For cutting pipe, angle iron, channel and more. For use with makita 5-7/8″ cordless metal cutting saw. Fully hardened steel saw plates are individually hand-hammered for flatness and expertly tensioned for true cuts. Ultra-thin kerf design provides smoother cuts with less drag on the motor and minimal material loss. Modified triple chip grind for increased efficiency and life.

 

Floor King 23416 Comparable to Crain 788 2-34 Dia x 16 Teeth x 12 Beveled Bore x ATB Grind Designed for 795 Toe-Kick Saw Carbide Tipped Saw Blade

Floor King 23416 Comparable to Crain 788, 2-3/4 Dia x 16 Teeth x 1/2 Beveled Bore x ATB Grind Designed for 795 Toe-Kick Saw, Carbide Tipped Saw Blade

Floor King 23416 Comparable to Crain 788, 2-3/4 Dia x 16 Teeth x 1/2 Beveled Bore x ATB Grind Designed for 795 Toe-Kick Saw, Carbide Tipped Saw Blade - 10 piece carbide-tipped electrician’s hole saw kit. Features extended life when used to cut wood, pvc, man-made building materials, and fiberglass. Kit includes (6) 7/8-inches, 1-1/8-inches, 1-3/8-inches, 1-3/4-inches, 2-inches, 2-1/2-inches carbide tipped hole saws (2) xa1, xa2 arbors (1) a12 arbor adapter (1) a7 ejector spring and case. High performance triple chip tungsten carbide tipped saws. Provides superior performance on materials too hard or abrasive for conventional high speed steel saws.

 

OrangeA Circular Saw Blade Sharpener 125MM 110V 370W Saw Blade Sharpener Machine Rotary Angle Mill Sharpener Grinder Grinding Machine for Carbide Tipped Saw Blade

OrangeA Circular Saw Blade Sharpener 125MM 110V 370W Saw Blade Sharpener Machine Rotary Angle Mill Sharpener Grinder Grinding Machine for Carbide Tipped Saw Blade

OrangeA Circular Saw Blade Sharpener 125MM 110V 370W Saw Blade Sharpener Machine Rotary Angle Mill Sharpener Grinder Grinding Machine for Carbide Tipped Saw Blade - Circular saw blade grinder can have a very good co-operation with the diamond sanding wheel. Voltage 110v, power 370w, grinding wheel size:492″. This circular saw blade also suitable to grind other material such as plastic, wood, aluminum alloy for different purpose like furniture manufacturing, decoration etc. The circular saw blade grinder is designed for sharpening various kinds of carbide tipped saw blades from size 80mm to 700mm. The saw blade sharpener with steel chassis construction, strong structure.

 

Makita B-07353 6-12 48T Carbide-Tipped Saw Blade

Makita B-07353 6-1/2″ 48T Carbide-Tipped Saw Blade

Makita B-07353 6-1/2″ 48T Carbide-Tipped Saw Blade - The blade features high-grade carbide tips for improved durability, and is engineered for smoother cutting. The makita 48t carbide-tipped saw blade is the ideal accessory for the makita 6-1/2″ plunge circular saw (model sp6000j, sold separately). With the sp6000j, the b-07353 is an ideal blade for a full range of cutting applications including ripping plywood.

 

Timberline 175-60C Specialty All Purpose 7-14-Inch Diameter by 60-Teeth by 58-Inch Bore with Diametermond Knockout ATB Grind Thin Kerf Carbide Tipped Saw Blade

Timberline 175-60C Specialty All Purpose 7-1/4-Inch Diameter by 60-Teeth by 5/8-Inch Bore with Diametermond Knockout ATB Grind Thin Kerf Carbide Tipped Saw Blade

Timberline 175-60C Specialty All Purpose 7-1/4-Inch Diameter by 60-Teeth by 5/8-Inch Bore with Diametermond Knockout ATB Grind Thin Kerf Carbide Tipped Saw Blade - All blades fit popular portable 7-1/4″ electric & worm drive circular saws. These are very popular all-purpose blades used for ripping and cross cutting wood framing, decking and plywood. . A durable series of blades designed for the contractors and do-it-yourselfers. Black&decker, bosch, dewalt, hitachi, jepson, makita, milwaukee, porter-cable, ryobi, skil.

 

Timberline 10181 Ti-Cut and trade Aluminum and Non-Ferrous TC Grind Thin Kerf Carbide Tipped Saw Blade

Timberline 10181 Ti-Cut and trade Aluminum and Non-Ferrous TC Grind Thin Kerf Carbide Tipped Saw Blade

Timberline 10181 Ti-Cut and trade Aluminum and Non-Ferrous TC Grind Thin Kerf Carbide Tipped Saw Blade - Thin kerf. Carbide tipped, professional quality. Negative 5-degree hook angle, 5/8-inch bore, tc grind. Designed to cut pvc, non-ferrous metals, copper and brass. 10-inch diameter, 80-teeth.

 

Tenryu PT-21060 8 Carbide Tipped Saw Blade  60 Tooth ATAF Grind - 58Ko Arbor - 0079 Kerf

Tenryu PT-21060 8″ Carbide Tipped Saw Blade ( 60 Tooth ATAF Grind – 5/8″Ko Arbor – 0.079 Kerf)

Tenryu PT-21060 8″ Carbide Tipped Saw Blade ( 60 Tooth ATAF Grind – 5/8″Ko Arbor – 0.079 Kerf) - Thin kerf for less waste and lighter cutting performance (reduced feed pressure). Each tip is precision honed on all four exposed surfaces this minimizes micro-chipping along the sharp edge of the blade and results in a sharper, longer-lasting edge. Fully hardened, expertly tensioned tool steel bodies absorb impact, remain flat and true, and resist excess heat build-up. High-grade, c-3, fine-grain tungsten carbide tips resist erosion for extended blade life. Aggressive rake angles for maximum cutting speed and efficiency.

 

Makita T-01410 40T Fine Crosscutting Carbide-Tipped Saw Blade 6-12

Makita T-01410 40T Fine Crosscutting Carbide-Tipped Saw Blade, 6-1/2″

Makita T-01410 40T Fine Crosscutting Carbide-Tipped Saw Blade, 6-1/2″ - Ultra-thin kerf carbide-tipped design provides smoother cuts with less drag on the motor and minimal material loss. Fully hardened and expertly hand-tensioned steel saw plates for true cuts. Specially designed for cordless saws to permit more cuts per charge. Carbide tooth construction for clean cuts and long life. For use with 6-1/2″ cordless circular saws with 5/8″ arbor.

 

Makita A-93821 7-14-Inch by 38-Teeth General Purpose Carbide-Tipped Saw Blade

Makita A-93821 7-1/4-Inch by 38-Teeth General Purpose Carbide-Tipped Saw Blade

Makita A-93821 7-1/4-Inch by 38-Teeth General Purpose Carbide-Tipped Saw Blade - Ferrous metal and cement. Cold cutting. Cost per cut compare to abrasives is less.

 

Makita A-91039 12-Inch 76-Teeth Stainless Steel Carbide-Tipped Saw Blade

Makita A-91039 12-Inch 76-Teeth Stainless Steel Carbide-Tipped Saw Blade

Makita A-91039 12-Inch 76-Teeth Stainless Steel Carbide-Tipped Saw Blade - 12-inch by76t. Stainless steel. 1-inch arbor.