Freud UC-215 Quadra-Cut Raised Panel Cutter for 3/4-Inch Stock
- The small cutter, with opposite shear angle, will push wood fibers down and shear them off leaving a crisp edge at the top of the panel. 4-15/16″ diameter. 5/8″ height and 15/64″ minor height. 10 degree angle with 3/4″ bore.
3/8″ Rotary Spot Weld Sheet Metal Hole Cutter Punch Remover Panel Separator for Power Drill Welding Autobody Body Work Tool Laser Tack Removal
- Rotary spot weld cutter 2-sided long life 3/8″ rotary blade 3″ long x 9/32″ wide 6 point arbor hardened hss steel removes spot welds on sheet metal provides better separation than a panel cutter cuts around spot welds, freeing the panel without damage blades interchange with many spot weld arbors including blair, eastwood and more cuts around the edge of the hole and ejects scrap as a slug. Spring loaded pilot “pops” slugs out virtually burr-free holes unlike twist drills and hole cutters that rip and tear.
Freud UC-211 2+2 Raised Panel Shaper Cutter For 3/4-Inch Stock – 3/4 Bore
- Covered by freud’s limited lifetime warranty. Thick micrograin carbide tips. Kickback reducing design.
Bosch 85639M Raised Panel Cutter 1-1/2-Inch Diameter 5/8-Inch Cut 1/2-Inch Shank Router Bit
- Recommended for use with a routing table. All bits must be inserted in the full length of the collet be sure to use only router bits and accessories specifically designed for your router.
Art Deco Raised Panel Shaper Cutter 3/4″ Bore 4-5/8″ C.D
- 3-wing micro-grain carbide tips for a long life and repeated sharpening. Art deco profile. Silver ptfe coating reduces resin build-up for fast and easy cleaning. 3/4″ bore x 4-5/8″ cutter diam x 1-1/2″ profile width. Precision machined from fatigue-proof steel for extra strength.
Amana SC654 OGEE PANEL CUTTER
- Horizontal, 3-wing, carbide tipped ogee profile 3/4″ bore 1-3/16″ reveal. 4-5/8″ overall diameter ——— degree 1-1/2″ radius c-005 rub collar.
Infinity Tools 83-004, Cove Raised Panel Shaper Cutter, 3/4″ Bore
- 3-wing micro-grain carbide tips for a long life and repeated sharpening. 3/4″ bore x 4-5/8″ cutter diam x 1-1/2″ profile width. Silver ptfe coating reduces resin build-up for fast and easy cleaning. Cove profile. Precision machined from fatigue-proof steel for extra strength.
Raised Panel Shaper Cutters – B 3/4 | D 4-5/8 | CL 5/8 | R 15/16 | DG – | P B
- I m p o r t a n t select size above based on legend below. B = bore d = diameter cl = cutting length r = radius dg = degree p = profile. 100% satisfaction guaranteed.
6Pc Roman Ogee Router Bit Raised Panel Back Cutters Rail & Stile 1/2″ Bits Case
- Wooden case included. Raised panel w/back cutters rail & stile roman ogee cove straight router bits. 6pc roman ogee router bit raised panel back cutters rail & stile 1/2″ bits case. Suitable for home of wood work shop, carbide tipped.
Spot Weld Cutter Drill Bit Tool For Auto Body Panel Repair Steel Seperator
- Spot weld cutter is a great addition to the tool kit of any welder double sided 3/8″,rotary cutter blade fits most 1/4″ drills provides better panel separations than a panel cutt”. Use this spot weld cutter drill bit to easily separate spot-welded panels without distorting. Drills and separates spot-welded panels more effectively than a panel cutter this great. The sheet metal the weld cutter’s double sided 3/8 rotary cutter blade fits most 1/4″”.
Infinity Tools 83-002, Standard Raised Panel Shaper Cutter, 3/4″ Bore
- 3-wing micro-grain carbide tips for a long life and repeated sharpening. 3/4″ bore x 4-5/8″ cutter diam x 1-1/2″ profile width. Silver ptfe coating reduces resin build-up for fast and easy cleaning. Precision machined from fatigue-proof steel for extra strength. Standard profile.
Bosch 85640M Ogee Raised Panel Cutter 3-1/2-Inch Diameter 5/8-Inch Cut 1/2-Inch Shank Router Bit
- The fully hardened and tempered steel shank provides ultimate durability. Premium-quality micro grain carbide tips are ground on specialized cnc equipment for an extra-fine finish with maximum sharpness and edge retention. This bit is used for making an attractive ogee design in raised panel doors and paneling.
Freud RP-A 5/8-Inch Stock Knife Set For Freud RP1000 Or RP2000 Raised Panel Cutter
- 401 shank. Covered by freud’s limited lifetime warranty. Claw ripper and panel cutter air tool, 7-inch length. When you need performance, you need sunex air tools. Zinc phosphate finish.
Freud UP016 3 Wing Bevel Raised Panel Shaper Cutter For 5/8-Inch Stock, 1-1/4 Bore
- Thick micrograin carbide tips. Covered by freud’s limited lifetime warranty. Kickback reducing design.
BOSCH 85640MC Ogee Raised Panel Cutter 3-3/8-Inch Diameter 5/8-Inch Cut 1/2-Inch Shank Router Bit
- We offer more than 500 items in solid carbide, carbide tipped and high speed steel varieties. . Bosch router bits are distinguished for their careful selection of materials exactly calculated cutting geometry, long bit life, extra sharp cutting edges and low vibration.
Grizzly C2066 Panel Cutter Face Cut Bore, 3/4-Inch
- An excellent selection. Shaped and sharpened with diamond wheels as fine as 600 grit these outstanding cutters are constructed with a high-tensile silver-based brazing which offers the utmost in strength and durability. Grizzly 3/4-inch bore shaper cutters feature top-quality c-2 carbide–the best available for wood cutting applications. Can be used on woods wood composites plywood and some plastics at 5 000 to 10 000 rpm.
Freud RP-E 5/8-Inch Stock Knife Set For Freud RP1000 Or RP2000 Raised Panel Cutter
- Covered by freud’s limited lifetime warranty.
Infinity Tools 83-001, Ogee Raised Panel Shaper Cutter, 3/4″ Bore
- Silver ptfe coating reduces resin build-up for fast and easy cleaning. Ogee profile. 3/4″ bore x 4-5/8″ cutter diam x 1-1/2″ profile width. Precision machined from fatigue-proof steel for extra strength. 3-wing micro-grain carbide tips for a long life and repeated sharpening.
Freud RP-B 5/8-Inch Stock Knife Set For Freud RP1000 Or RP2000 Raised Panel Cutter
- Silver ptfe coating reduces resin build-up for fast and easy cleaning. Shaker profile. Covered by freud’s limited lifetime warranty. Covered by freud’s limited lifetime warranty. Precision machined from fatigue-proof steel for extra strength.
Grizzly C2078 Panel Cutter with Convex 1-1/4-Inch Bore
- Grizzly 3/4-inch bore shaper cutters feature top-quality c-2 carbide–the best available for wood cutting applications. Can be used on woods wood composites plywood and some plastics at 5 000 to 10 000 rpm. An excellent selection. Shaped and sharpened with diamond wheels as fine as 600 grit these outstanding cutters are constructed with a high-tensile silver-based brazing which offers the utmost in strength and durability.
Freud UC-202 Bevel Raised Panel Shaper Cutter For 5/8-Inch Stock – 3/4 Bore
- Thick micrograin carbide tips. Kickback reducing design. Covered by freud’s limited lifetime warranty.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
