Straight Flute Screw Extractor
- Use for 3/8″, 10mm. Designed for softer materials or thin-walled pieces such as pipes and fittings. Removes both left-hand and right-hand threaded parts. Design eases extraction because it does not expand the material as you remove it. Extractor size and recommended drill bit size are etched on each tool.
10 Pack Irwin 53604 Hanson ST-4 Straight Flute Screw Extractor (1/2″ to 9/16″)
- Extractor size and recommended drill bit size are etched on each tool. Design eases extraction because it does not expand the material as you remove it. Use for 1/2″, 9/16″, 1/4″ npt, 12mm, 14mm, 1/4″ bsp. Designed for softer materials or thin-walled pieces such as pipes and fittings. Removes both left-hand and right-hand threaded parts.
Straight Flute Screw Extractor
- Sharp, straight tapered flutes bit into work without building. . Made of special tool steel. Carded for easy display. Drill size to use is permanently marked on shank of extractor. Remove broken screws, bolts, pipes, and studs.
Irwin Tools 53645 Straight Flute Screw Extractors, 6 Piece Set
- Extractor size and recommended drill bit size are etched on each screw extractor. Screw extractors can remove both left-hand and right-hand threaded parts. Irwin® screw extractor is designed to ease extraction by not expanding material as it is removed. This screw extractor set is designed for softer materials or thin-walled pieces, such as pipes. 6-piece set includes st-1 to st-6 screw extractors.
Straight Flute Screw Extractor
- 9/64″ drill. Removes sizes 3/16″ to 5/16″. Carded. Sold as 3 units at $9. Country of origin (tba). ) Not for removing hardened screws & bolts. Sku # 23691. 23 per unit. (1 unit = 3 each. Manufacturer number 53601. Distributed by irwin industrial.
Straight Flute Screw Extractor
- Use for 3/8″, 10mm. Removes both left-hand and right-hand threaded parts. Extractor size and recommended drill bit size are etched on each tool. Irwin industrial tool. Design eases extraction because it does not expand the material as you remove it.
Vermont American 21872 Straight Flute Screw Extractor Set, Red, 5-Piece
- 5-piece straight flute screw extractor set. Includes one each of straight screw extractor sizes no 1 through no 5. Required drill size is permanently laser-marked on the shank of each extractor for easy reference.
Irwin 53605 Hanson ST-5 Straight Flute Screw Extractor (5/8″)
- Designed for softer materials or thin-walled pieces such as pipes and fittings. Use for 5/8″, 3/8″ npt, 16mm, 3/8″ bsp. Removes both left-hand and right-hand threaded parts. Design eases extraction because it does not expand the material as you remove it. Extractor size and recommended drill bit size are etched on each tool.
Straight Flute Screw Extractor
- #4, straight flute screw extractor, designed for softer materials or thin walled pieces such as pipes & fittings, design eases extraction because it does not expand the material as you remove it, removes both left-hand & right-hand threaded parts, r.
Straight Flute Screw Extractor – ST – 2 by American Tool Exchange
- Design eases extraction because it does not expand the material as you remove itdesigned for softer materials or thin-walled pieces such as pipes and fittingsextractor size and recommended drill bit size are etched on each toolremoves both left-hand and right-hand threaded parts.
Vermont American 21862 Number 2 High Carbon Steel Straight Flute Screw Extractor by Vermont American
- Heat-treated and tempered for long lifetreated for rust resistancestraight flutes provide maximum bite without binding or chewing.
Hanson Straight Flute Screw Extractors 4 Piece Set (Carded) by Hanson
- Removes broken piece without damage to threads. Hanson straight flute screw extractors 4 piece set (carded). Straight tapered flute will not expand piece being removed. Use drill size 3/16″. Designed for use with taps, reamers, screw extractors. Adjusted & tightened to size by twisting knurled nut. Manufactured in united states. Correct drill size stamped on each screw extractor.
Irwin 53602 Hanson ST-2 Straight Flute Screw Extractor (3/8″)
- Design eases extraction because it does not expand the material as you remove it. Extractor size and recommended drill bit size are etched on each tool. Designed for softer materials or thin-walled pieces such as pipes and fittings. Use for 3/8″, 10mm. Removes both left-hand and right-hand threaded parts.
Hanson 53601 Straight Flute Screw Extractors by Hanson
- This irwin hanson 536/526 series st-1 straight-flute screw extractor is designed for softer materials or thin-walled pieces, such as pipes and fittingsthe design on these screw extractors eases extraction because it does not expand the material as it is removedeach irwin screw extractor can remove both left-hand and right-hand threaded parts and has the size and recommended drill bit size etched onto ituse drill size 9/64for removing broken screws, studs and bolts in soft materials, or thin-walled pieces such as pipe and fittingsstraight tapered flute will not expand piece being removedremoves broken piece without damage to threadscorrect drill size stamped on each screw extractor.
Irwin 53606 Hanson ST-6 Straight Flute Screw Extractor (3/4″)
- Designed for softer materials or thin-walled pieces such as pipes and fittings. Use for 3/4″, 1/2″ npt, 20mm, 1/2″ bsp. Removes both left-hand and right-hand threaded parts. Extractor size and recommended drill bit size are etched on each tool. Design eases extraction because it does not expand the material as you remove it.
Straight Flute Screw Extractor – ST – 2
- Removes both left-hand and right-hand threaded parts. Designed for softer materials or thin-walled pieces such as pipes and fittings. Extractor size and recommended drill bit size are etched on each tool. Design eases extraction because it does not expand the material as you remove it.
Irwin 53603 Hanson ST-3 Straight Flute Screw Extractor (7/16″)
- Designed for softer materials or thin-walled pieces such as pipes and fittings. Design eases extraction because it does not expand the material as you remove it. Removes both left-hand and right-hand threaded parts. Use for 7/16″, 1/8″ npt, 10mm, 1/8″ bsp. Extractor size and recommended drill bit size are etched on each tool.
Hanson 53602 Straight Flute Screw Extractors
- Removes broken piece without damage to threads. Manufactured in united states. For removing broken screws, studs, and bolts in soft materials, or thin-walled pieces. Correct drill size stamped on each screw extractor. Use drill size 3/16″. Straight tapered flute will not expand piece being removed. Designed for use with taps, reamers, screw extractors. Adjusted & tightened to size by twisting knurled nut.
Hanson 53601 Straight Flute Screw Extractors
- Correct drill size stamped on each screw extractor. The design on these screw extractors eases extraction because it does not expand the material as it is removed. Each irwin screw extractor can remove both left-hand and right-hand threaded parts and has the size and recommended drill bit size etched onto it. For removing broken screws, studs and bolts in soft materials, or thin-walled pieces such as pipe and fittings. Use drill size 9/64″. Removes broken piece without damage to threads. Straight tapered flute will not expand piece being removed. This irwin hanson 536/526 series st-1 straight-flute screw extractor is designed for softer materials or thin-walled pieces, such as pipes and fittings.
Straight Flute Screw Extractor by Irwin Tools
- Straight flute screw extractor. Straight flute screw extractor.
Straight Flute Screw Extractor
- Able to remove left-hand bolts as well as right-hand bolts. Made from rugged high carbon steel to handle the stress of removing bolts. Extractor size and recommended drill bit size are etched on each tool for easy identification. Will not expand soft material being removed resulting in easier removal.
Straight Flute Screw Extractor
- 03 pounds. -Price is for 1 each. Dimensions overall product weight -0. -Extractor size and recommended drill bit size are etched on each extractor. Number of bits -1. . -Ideal for thin-walled materials such as pipe and fittings. 585-53601 features -extractor will not expand material being removed, resulting in easier removal.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
