22 Greatest Jack Hammers

 

ARKSEN 3600W Electric Demolition Jack Hammer Concrete Breaker Punch Bit w/ Chisel + Case - Speed 1900 impacts per minute, motor power 3600 watts. 3600 watt electric jack hammer delivers 1900 impacts per minute at 55 ft/lbs which can break up the hardest of surfaces. Perfect for demolition, trenching, chipping, breaking holes in concrete, block, brick, tile stucco, housing foundation removal, concrete slab, oil chimney and much more. 360° swivel foregrip handle for maximum control. Heavy duty carrying case with handle chisel bit are made from hardened steel to reduce breakage and provide long life use.

 

Tooluxe 02625 40Crv Jack Hammer Bit Set | Includes Two Chisels - Chromium-vanadium steel made tough to break through hard surfaces. Replacement bits for jack hammers, these extra-long and sturdy drill bits are designed for serious demolition. Versatile uses designed to cut through concrete, clay or many other hard surfaces. Two-piece set two, 16-inch long chisels fit all it all jack hammers larger than type 65#. Flat and pointed tips includes one 16-inch flat tip bit and one 16-inch point bit so you’re ready for the next job.

 

Interstate Pneumatics CU-853 3/4 Inch Hose Barb Straight Through Jack Hammer Coupler - Universal design provides quick, easy and effective coupling of air hose. Note the use of an interstate pneumatics jack hammer hose safety cable is recommended to assure that if couplings are accidentally disconnected they will not fly and hurt someone. Ideal for jack hammer and other industrial applications. Only one jack hammer hose safety cable is required for each universal coupling set, two couplers coupled together. Interstate pneumatics 3/4 inch hose barb jack hammer universal twist lock coupling. Includes safety pin and rubber gasket, also sold individually. With the universal head, any fittings within that range can be connected regardless of hose shank or thread size. Maximum working pressure 200 psi. The pin guarantees the fittings are properly connected as pin will not go through holes in mating flanges until couplings are locked in place.

 

Yescom 2400W 1550BPM Electric Demolition Jack Hammer with Double Insulated Motor Casing 2 Chisels Case - Features- double insulated motor casing-designed for secure operation- shock mounted handles and heavy duty aluminum casing help to reduce fatigue by absorbing vibration- 360 degrees swivel handle makes it easy to control- lock-on button allows continuous operation without holding the trigger- suitable for demolition, trenching, chipping, breaking holes, housing foundation removal and so onspecification- rated power 2400w, 110v/60hz- impact rate 1550bmp- impact energy 45j- power cord length 9. 5″h- chisel size 1. 6″w x 5. 5ft/114″- overall size (without chisel) 26. 18″w x 15. 35″lpackage content- 1x demolition hammer- 1x point chisel- 1x flat chisel- 1x steel case- 1x mask- 1 pair of glasses- 1 pair of gloves- 1 pair of earplug- 3x wrench- 1x oil can- 2x carbon brush- 1x manual. 4″l x 10.

 

Neiko 02858A Industrial-Grade Electric Demolition Jack Hammer with 2 Huge Bits - 360-degree swivel auxiliary handle for maximum versatility. Comes with rugged steel carry case. 1240 watt 120v electric motor 1400 bpm no-load speed. Includes two large hardened chrome-vanadium steel chisels.

 

Heavy Duty 1-1/2″ Rotary Demolition Jack Hammer Concrete Breaker With Core Drill Bit 2 in 1 - 360° swivel foregrip handle for maximum control. Perfect for demolition, trenching, chipping, breaking holes in concrete, block, brick, tile stucco, housing foundation removal, concrete slab, oil chimney and much more. Heavy duty 1-1/2″ rotary demolition jack hammer concrete breaker with core drill bit 2 in 1. Heavy duty carrying case with handle. 2800 watt electric jack hammer delivers 1800 impacts per minute at 55 ft/lbs which can break up the hardest of surfaces.

 

XtremepowerUS 1-1/8″ Hex Shank 5-3/8″ Shovel Width Construction Clay Spade Scoop Shovel Bit for Electric Demolition Jack Hammer - Spade shovel for use with xtremepowerus demolition hammers. Rounded end works more like a shovel so you can scoop larger areas at without having to chip away as. 17-1/2″ total length. 1-1/8″ hex shank. 5-3/8″ shovel width.

 

JGB Enterprises Eagle Hosee Red Jackhammer Rubber Air Hose, 3/4″ Universal (Chicago) Couplings, 50′ Length - Tube made of a natural rubber/sbr blend for flexibility and resistance to abrasion, and red epdm synthetic rubber cover for resistance to ozone, chemicals, and aging. Two factory-installed steel universal couplings. Temperature range of -22 to +176 degrees f (-30 to +80 degrees c). Spiral polyester yarn reinforcement for strength. Hose designed for air tool applications on construction sites.

 

Heavy Duty 1-1/2″ Demolition Jack Hammer Concrete Breaker - Drill capacity dia. Grease packed gear box shock mounted handle-absorbs vibration body color dark blue specifications voltage 110 v/60 hz input power 900w hammer frequency 2900bpm(rpm) max. 1-1/2”/38mm body color may vary package included 1 x 1-1/2”demolition jack hammer 1 x side handle 1 x point chisel (5/8″ hex shank,270mm-long) 1 x flat chisel (5/8″ hex shank, 270mm-long) 1 x key wrench 1 x pair of spare carbon brushes 1 x heavy duty metal case 1 x user’s manual. . Ideal for demolition/concrete jobsite, crushing chipping digging and squaring.

 

Interstate Pneumatics CU-901 1″ Male NPT Straight Through Jack Hammer Coupler - Ideal for jack hammer and other industrial applications. Includes safety pin and rubber gasket, also sold individually. Note the use of an interstate pneumatics jack hammer hose safety cable is recommended to assure that if couplings are accidentally disconnected they will not fly and hurt someone. With the universal head, any fittings within that range can be connected regardless of hose shank or thread size. Only one jack hammer hose safety cable is required for each universal coupling set, two couplers coupled together. Universal design provides quick, easy and effective coupling of air hose. Maximum working pressure 200 psi. The pin guarantees the fittings are properly connected as pin will not go through holes in mating flanges until couplings are locked in place. Interstate pneumatics 1 inch male npt jack hammer universal twist lock coupling.

 

ARKSEN 2800W Electric Demolition Jack Hammer Concrete Breaker Point & Chisel w/ Case - 360° swivel foregrip handle for maximum control. Perfect for demolition, trenching, chipping, breaking holes in concrete, block, brick, tile stucco, housing foundation removal, concrete slab, oil chimney and much more. Heavy duty carrying case with handle. 2800 watt electric jack hammer delivers 1800 impacts per minute at 55 ft/lbs which can break up the hardest of surfaces. Speed 1800 impacts per minute, motor power 2800 watts.

 

BEAMNOVA 52CC Gasoline Demolition Jack Hammer Concrete Gas Breaker Jackhammer Drill Punch Single Cylinder, Air Cooling - Certification ce. Fuel consumption rate ≤ 06l/h, impact frequency 770-1500 bpm, impact energy 20～55j. Displacement52cc, fuel mixture ratio 251 (25 gasoline 1 motor oil). Engine type1-3/4″ x 1-3/8″ (44x34mm), gas powered, single cylinder, air cooling, 2 stroke. Suitable for tearing up foundations, ripping up driveways, demolishing re-enforced, concrete floors or walls, breaking through solid rock, etc.

 

TR Industrial TR89305 60 Joules Electric Jack Hammer for Demolition, Graphite - 60 joules (442 ft-lbs) of impact energy delivers powerful, maximum performance. 1800 bpm ultra fast demolition helps you get the job done faster. Etl listed, rigorously tested and certified to comply with ul safety standards. All-metal housing built for heavy-duty applications. 20-ft extra long ul listed power cord with double insulated plug, handles extreme-weather.

 

Jack Hammer Flat Nose Digging Shovel Bit - Heavy duty steel weighs over six pounds. For use on concrete and also digging in hard dirt or wet/dry clay. Shovel width 525″. Overall length 175″. Standard jack hammer flat nose digging attachement bit.

 

XtremepowerUS Jack Hammer Bit Set 2-Pieces - 1-1/8″ bull point chisel, 1-1/8″ flat chisel. Compatible for xtremepowerus jackhammer. Sturdy drill bits are designed for serious demolition.

 

TR Industrial 6-Piece Electric Jack Hammer with Extra Spade and Chisels Accessories - Total portability comes with a blow-molded case secured with durable metal clips and rollers. Accessories included jackhammer, 2 hex/2 flat/1 spade chisels, safety goggles, working gloves. Break on through power you can trust to break through concrete, clay, concrete floors, and more. Power excellent heavy-duty drilling power, 11 amp motor, 1,800 bpm, and tÃœv tested, 176 hours. Safety inspected and certified with etl listing, double-insulated plug, and ul listed cable.

 

Demolition Hammer 1000W Jackhammer Concrete Breaker With Case by XtremepowerUS - Includes 1pc 5/8″ hex shank point chilse & 1pc 5/8″ hex shank flat chiselx extr. Maximum drill capacity diameter 1-1/2′. Hammer frequency 3000bpm( rpm). Input power 1000w.

 

Goodyear 20665550 3/4″ X 50′ 200 PSI Red Jack Hammer Hose Assembly w/ Coupled Universals on Both Ends - From us you will receive a goodyear hose, which in our opinion is the best brand in the market for this hose type. Goodyear 3/4″ x 50′ 200 psi red jack hammer hose assembly w/ coupled universals on both endsnote this hose is also available in 250 psi & 300 psi versions. This jackhammer hose is tough, durable and flexible which allows for maximum performance. Item descriptionred jack hammer hose 3/4″ id x 50′ goodyear 200 psi red pneumatic air tool/jackhammer hose assembly, complete with universal/chicago/crowsfoot fittings crimped on each end. Brandtrusted brand this hose is made by goodyear, branding on hose 200 wp jackhammer hose, made in usa note there are many sellers who are selling off-brand, damaged, or low quality hoses. Perfect for mobile compressors. Additional colors are also available, please contact us if you are interested. Related search terms red jackhammer hose, red rubber jack hammer hose assembly, red rubber jackhammer air hose, red rubber air hose jack hammer assembly, goodyear red jackhammer hose, novaflex jackhammer hose, jack hammer jackhammer hose, 200# jackhammer hose, red 200# jack hammer hose.

 

TR Industrial Asphalt Cutter Chisel Hex Shank for TR Electric Demolition Jackhammer - Not for use with concrete. Does not fit makita, milwaukee, dewalt or hitachi demolition jackhammers. Forged in one piece of high-grade steel for strength and durability. Use with tr industrial jackhammers 100 and 300 series (tr89100, tr89105, tr89300, tr89305). 4-3/4-inch wide for cutting asphalt and hard ground.

 

1500 Watt Electric Powered Jack Hammer Set for Digging and Breaking (Includes 3 Giant Bits) - Easy to engage trigger lock button allows for a continuous operation option. Specifications 110 voltage, frequency 60 hz, max impact rate 1,400 bpm. Oversized 360 degree swiveling side handle, 3-bits include 1 chisel, 1 point and 1 spade bit. Safety start pressure engaging mechanism feels when pressure it put on the bit giving you complete control and less wear on the unit. Complete with gloves, eye protection, 3 giant bits, wrenches for maintenance, instruction manual, metals storage case and a mini gear oil can (no oil included).

 

ARKSEN 2200W Electric Demolition Jack Hammer Drill 2-Piece Concrete Bit - Since an air compressor is not required, this is one of the most portable jack hammers in the market. Hex shank bits•side handle swivels 360° for greater control•delivers 1800 bpm for fast demolition•plug in anywhere hammer does not need a compressor•suitable for home and business specifications•color orange•power type electric•motor power 2200 watts•chuck size 1-1/8 in. Our jack hammer is perfect for breaking up concrete, asphalt, mortar, hard clay, rocks, bricks and more this jack hammer is perfect for home renovations or stone masonry project. Adjustable 360° foregrip provides extra control and comfort during extended use. •Chuck type hex•voltage 110v/60hz•no load speed 1900rpm•speed 1800 impacts per minute includes•2200 watt electric demolition jack hammer•16″ bull point chisel•16″ flat chisel•protective gloves•protective goggles•oil bottle•3 x hex keys•wrench•carrying case with handle. •Heavy duty, durable construction•perfect for demolition, trenching, chipping, breaking holes in concrete, block, brick, tile stucco, housing foundation removal, concrete slab, oil chimney and much more•360° swivel foregrip handle•industrial quality, very durable •heavy duty carrying case with handle•storage carrying case included •it accepts 1-1/8 in. Arksen 2200 watt electric jack hammer delivers 1800 impacts per minute at 55 ft/lbs which can break up the hardest of surfaces.

 

Interstate Pneumatics CU-851 3/4″ Male NPT Straight Through Jack Hammer Coupler - The pin guarantees the fittings are properly connected as pin will not go through holes in mating flanges until couplings are locked in place. Includes safety pin and rubber gasket, also sold individually. Universal design provides quick, easy and effective coupling of air hose. Ideal for jack hammer and other industrial applications. Maximum working pressure 200 psi. Interstate pneumatics 3/4 inch male npt jack hammer universal twist lock coupling. Only one jack hammer hose safety cable is required for each universal coupling set, two couplers coupled together. Note the use of an interstate pneumatics jack hammer hose safety cable is recommended to assure that if couplings are accidentally disconnected they will not fly and hurt someone. With the universal head, any fittings within that range can be connected regardless of hose shank or thread size.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.