22 Top Fitting Stainless Steels for 2020

 

DERNORD Tri Clamp Bowl Reducer Sanitary Fitting Stainless Steel 304 Tri Clamp Size 6 inch x 2 inch #ad

DERNORD Tri Clamp Bowl Reducer Sanitary Fitting Stainless Steel 304 (Tri Clamp Size: 6 inch x 2 inch)

DERNORD Tri Clamp Bowl Reducer Sanitary Fitting Stainless Steel 304 (Tri Clamp Size: 6 inch x 2 inch) #ad - Bowl reducer fitting to connect two pipes of different diameters that are along the same pipe axis. Tri clamp bowl reducer ferrule size 168mm fits 6″ tri clamp. Fitting clamps to tubing on both ends for a non-permanent seal, providing take-down access. Tri clamp bowl reducer ferrule size 64mm fits 2″ tri clamp. Stainless steel 304 for resistance to corrosion and high temperatures.

 

10 X Stainless Steel Cable Railing End Fitting Terminal - Stud End Fitting- Right Hand Swage- 18 Cable - Hand Rail - Deck Railing #ad

10 X Stainless Steel Cable Railing End Fitting Terminal – Stud End Fitting- Right Hand Swage- 1/8″ Cable – Hand Rail – Deck Railing

10 X Stainless Steel Cable Railing End Fitting Terminal – Stud End Fitting- Right Hand Swage- 1/8″ Cable – Hand Rail – Deck Railing #ad - Overall length 3-7/8″, thread length 1-7/8″, 1/4″, 20 right hand thread. A swage tool is required for crimping https//wwwamazoncom/dp/b077xv6dmg. Each order includes 10 each studs terminals, 10 acorn nuts, 10 hex nuts, 10 washers. Type 316 stainless steel hand swage stud end fitting terminal for cable railing. Donsky brand hand swage stud for 1/8″ cable other sellers are selling recycled materials we tested our products for quality and strength.

 

Stainless Steel 304 Threaded Cast Pipe Fitting 90 Degree Street Elbow 12 NPT Female x 12 NPT Male #ad

Stainless Steel 304 Threaded Cast Pipe Fitting, 90 Degree Street Elbow, 1/2″ NPT Female x 1/2″ NPT Male

Stainless Steel 304 Threaded Cast Pipe Fitting, 90 Degree Street Elbow, 1/2″ NPT Female x 1/2″ NPT Male #ad - Double ferrule tube fittings provide torque free, leak proof joints at all tubing. Connections and prevent costly and hazardous leaks in process and instrumentation tubing. Strainer basket with metal stem and rubber seal. Dual couplings for joining two tubes of the same diameter. Back ferrules hold tubing tight within the body of the fitting while front ferrules hold tubing tight through the nut.

 

Elkay LKAD35 3-12 Drain Fitting with Stainless Steel Body Strainer Basket and Offset Tailpiece #ad

Elkay LKAD35 3-1/2″ Drain Fitting with Stainless Steel Body, Strainer Basket, and Offset Tailpiece

Elkay LKAD35 3-1/2″ Drain Fitting with Stainless Steel Body, Strainer Basket, and Offset Tailpiece #ad - Our accessories make the time at your kitchen, prep, bar or laundry sink more convenient, efficient and effortless. From color matched drains to custom-sized stainless steel sink grids and wood cutting boards, we have what you need. Elkay sink accessories are designed to fit perfectly and coordinate with your elkay sink.

 

Flextron FTGC-SS14-36 36 Gas Line Connector with 38 Outer Diameter and Nut Fittings Stainless Steel #ad

Flextron FTGC-SS14-36 36″ Gas Line Connector with 3/8″ Outer Diameter and Nut Fittings, Stainless Steel

Flextron FTGC-SS14-36 36″ Gas Line Connector with 3/8″ Outer Diameter and Nut Fittings, Stainless Steel #ad - 75 gas appliances and manufactured homes standards. 24, z21. On the ends of this 36″ long connecter are nut fittings. This is a flextron gas connector from their ss14 series of connectors, which is designed for indoor and outdoor use with gas log and space heaters. Please consult the product information for the flow capacity for this part, for natural gas. The design has been tested on strength and it can withstand an internal hydrostatic pressure of 250 psi or 17 mpa without bursting or showing signs of leaks. It has an outer diameter of 3/8″ and an inner diameter of 1/4″ and is made of uncoated stainless steel. 5 psi. 18. The connector is rated for use in the temperature range of -40 f to 150 f and can be used up to a pressure of 0. The connector can handle external temperatures of 800 f. Each connector is 100% tested on leaks before it leaves the factory. It can also endure up to 30 bends without leaks in water at a depth of maximum 2 inches and withstands 15 twists of 90 degrees, without showing signs of corrosion. The part meets the amse a112. 6 and ansi z21. 69 and z21.

 

Flexcraft 27124-NL Braided Faucet Connector 24 Inch Long 12 IPS Brass Nut X 38 Female Compression Fitting 24 In Stainless Steel Lead-Free #ad

Flexcraft 27124-NL Braided Faucet Connector 24 Inch Long, 1/2″ IPS Brass Nut X 3/8″ Female Compression Fitting, 24 In, Stainless Steel Lead-Free

Flexcraft 27124-NL Braided Faucet Connector 24 Inch Long, 1/2″ IPS Brass Nut X 3/8″ Female Compression Fitting, 24 In, Stainless Steel Lead-Free #ad - Rugged, braided stainless-steel construction for long lasting durability. Lead free, worry-free water safe for consumption. Flexible, easy to install water supply hose under sink to connect to faucets. Economical, lasts long, easy to install by hand, corrosion resistant. Break resistant, flexible braided design resists kinking and breakage. Performance, can handle pressure up to 125 psi. No leaks, well sealed connectors fits standard valves and prevents leaks.

 

2pcs Locknut 1 NPT Stainless Steel Lock Nut O-Ring Groove Pipe Fitting #ad

2pcs Locknut 1″ NPT Stainless Steel Lock Nut O-Ring Groove Pipe Fitting

2pcs Locknut 1″ NPT Stainless Steel Lock Nut O-Ring Groove Pipe Fitting #ad - Material stainless steel 304. Overall diameter 45mm. Package include 2 x lock nut. Size 1″. Overall thickness 9mm.

 

【10 Pack】Invisible Stud Stud Receiver for 18 Cable Deck Railing Threaded End Fitting Stainless Steel Included 316 Marine Grade Dome Swage Dead End #ad

【10 Pack】Invisible Stud & Stud Receiver for 1/8″ Cable Deck Railing, Threaded End Fitting Stainless Steel, Included 316 Marine Grade Dome Swage Dead End

【10 Pack】Invisible Stud & Stud Receiver for 1/8″ Cable Deck Railing, Threaded End Fitting Stainless Steel, Included 316 Marine Grade Dome Swage Dead End #ad - Marine grade, this cable railing kit is made of t316 stainless steel, super strong resistance to rust ,water and corrosion excellent for both outdoor and indoor applications. Easy to install, the receiver could be rotated to tense wire rope hex socket to prevent slipping while tensioning the cable an allen wrench is included . Detachable, the big end can be remove by turning the receiver in case you need to redo or remove it. Invisible, the receiver can be hided in the post for pretty apprearance be fit for both wood & metal post .

 

Sanitary Weld Elbow 90 Degree OD 51mm 2 Pipe Fitting Stainless Steel SS304 #ad

Sanitary Weld Elbow 90 Degree OD 51mm 2″ Pipe Fitting Stainless Steel SS304

Sanitary Weld Elbow 90 Degree OD 51mm 2″ Pipe Fitting Stainless Steel SS304 #ad - About us –if you have any question with this pipe,please contact us first,we will slove it for you in 24 hours –when receiving your order,please check first,if receive damaged or wrong item ,please contact us,we will arrange return or refund for you wall thickness from 19mm to 51mm 1. 5mm from 57mm to 102mm 2mm features –operating temperatures range from -425 to 1200 degrees f –fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness). Package included1x51mm 2″ pipe fitting. –Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries.

 

Flextron FTGC-SS14-18 16 Gas Line Connector with 38 Outer Diameter and Nut Fittings Stainless Steel #ad

Flextron FTGC-SS14-18 16″ Gas Line Connector with 3/8″ Outer Diameter and Nut Fittings, Stainless Steel

Flextron FTGC-SS14-18 16″ Gas Line Connector with 3/8″ Outer Diameter and Nut Fittings, Stainless Steel #ad - The part meets the amse a112. It has an outer diameter of 3/8″ and an inner diameter of 1/4″ and is made of uncoated stainless steel. Each connector is 100% tested on leaks before it leaves the factory. On the ends of this 16″ long connecter are nut fittings. Please consult the product information for the flow capacity for this part, for natural gas. The design has been tested on strength and it can withstand an internal hydrostatic pressure of 250 psi or 17 mpa without bursting or showing signs of leaks. The connector can handle external temperatures of 800 f. 24, z21. It can also endure up to 30 bends without leaks in water at a depth of maximum 2 inches and withstands 15 twists of 90 degrees, without showing signs of corrosion. 69 and z21. The connector is rated for use in the temperature range of -40 f to 150 f and can be used up to a pressure of 0. 75 gas appliances and manufactured homes standards. 18. 6 and ansi z21. This is a flextron gas connector from their ss14 series of connectors, which is designed for indoor and outdoor use with gas log and space heaters. 5 psi.

 

Flextron FTGC-SS14-12 10 Gas Line Connector with 38 Outer Diameter and Nut Fittings Stainless Steel #ad

Flextron FTGC-SS14-12 10″ Gas Line Connector with 3/8″ Outer Diameter and Nut Fittings, Stainless Steel

Flextron FTGC-SS14-12 10″ Gas Line Connector with 3/8″ Outer Diameter and Nut Fittings, Stainless Steel #ad - Please consult the product information for the flow capacity for this part, for natural gas. The design has been tested on strength and it can withstand an internal hydrostatic pressure of 250 psi or 17 mpa without bursting or showing signs of leaks. 6 and ansi z21. 5 psi. On the ends of this 10″ long connecter are nut fittings. The connector can handle external temperatures of 800 f. It can also endure up to 30 bends without leaks in water at a depth of maximum 2 inches and withstands 15 twists of 90 degrees, without showing signs of corrosion. 24, z21. The part meets the amse a112. This is a flextron gas connector from their ss14 series of connectors, which is designed for indoor and outdoor use with gas log and space heaters. 75 gas appliances and manufactured homes standards. Each connector is 100% tested on leaks before it leaves the factory. 69 and z21. 18. It has an outer diameter of 3/8″ and an inner diameter of 1/4″ and is made of uncoated stainless steel. The connector is rated for use in the temperature range of -40 f to 150 f and can be used up to a pressure of 0.

 

Megairon 90 Degree Weld Short ElbowSanitary Pipe Fitting Stainless Steel 31625MM 1 Tube OD #ad

Megairon 90 Degree Weld Short Elbow,Sanitary Pipe Fitting, Stainless Steel 316,25MM 1″ Tube OD

Megairon 90 Degree Weld Short Elbow,Sanitary Pipe Fitting, Stainless Steel 316,25MM 1″ Tube OD #ad - Made of stainless steel 316 for resistance to corrosion and high temperatures. Od 25mm 1″,wall thickness15 mm,long radius 90-degree elbow for changing flow direction. Operating temperatures range from -425 to 1200 degrees f,meets specification astm a269 for quality assurance. Fitting welds to tubing on both ends to create a tight seal against leaks,low carbon content to ensure greater resistance to corr,low carbon content to ensure greater resistance to corr. 90-degree weld short elbow for connecting two pipes or tubes at an angle,welded connections ensure tight seals and reduce the possibility of leakage.

 

NorthStar Swivel Pressure Washer Coupler - 5000 PSI 38in Fitting Stainless Steel Model Number ND10067P #ad

NorthStar Swivel Pressure Washer Coupler – 5000 PSI, 3/8in. Fitting, Stainless Steel, Model Number ND10067P

NorthStar Swivel Pressure Washer Coupler – 5000 PSI, 3/8in. Fitting, Stainless Steel, Model Number ND10067P #ad - Withstands up to 5000 psi. F x 3/8in. Stainless steel, including insert. Long overall. The northstar swivel pressure washer coupler swivels under pressure. ) 3/8, max. M female inlet (in. Psi 5,000, material stainless steel. 1 1/2in. 200deg f maximum temp. Inlet & outlet 3/8in.

 

15 1-12 Diameter 38mm 3 Way Tee Sanitary Ferrule Pipe Fitting Stainless Steel SS316 #ad

1.5″ 1-1/2″ Diameter 38mm 3 Way Tee Sanitary Ferrule Pipe Fitting Stainless Steel SS316

1.5″ 1-1/2″ Diameter 38mm 3 Way Tee Sanitary Ferrule Pipe Fitting Stainless Steel SS316 #ad - 90-degree weld short elbow for connecting two pipes or tubes at an angle,welded connections ensure tight seals and reduce the possibility of leakage. Made of stainless steel 316 for resistance to corrosion and high temperatures. Od 25mm 1″,wall thickness15 mm,long radius 90-degree elbow for changing flow direction. Operating temperatures range from -425 to 1200 degrees f,meets specification astm a269 for quality assurance. Fitting welds to tubing on both ends to create a tight seal against leaks,low carbon content to ensure greater resistance to corr,low carbon content to ensure greater resistance to corr.

 

34Male x 34 Male Threaded Pipe Fitting Stainless Steel SS304 NPT NEW #ad

3/4″Male x 3/4″ Male Threaded Pipe Fitting Stainless Steel SS304 NPT NEW

3/4″Male x 3/4″ Male Threaded Pipe Fitting Stainless Steel SS304 NPT NEW #ad - Features shape threaded pipe (male x male) connectionnpt-npt material 304 stainless steel measurement 3/4″ length41mm other size is available package include 1 piece x 3/4″male x 3/4″ male threaded pipe fitting stainless steel ss304 npt new.

 

Flexcraf 27920-NL-2 Line Connects Kitchen Sink to Water Supply Braided Faucet Connector with 38 In FIP Female Compression Fitting Stainless Steel 20 in Pack Of 2 #ad

Flexcraf 27920-NL-2 Line Connects Kitchen Sink to Water Supply, Braided Faucet Connector with 3/8 In FIP Female Compression Fitting Stainless Steel, 20 in (Pack Of 2)

Flexcraf 27920-NL-2 Line Connects Kitchen Sink to Water Supply, Braided Faucet Connector with 3/8 In FIP Female Compression Fitting Stainless Steel, 20 in (Pack Of 2) #ad - Specification 3/8″ fip x 3/8″ fip x 12″, 125 psi working temperature 40-140 f. Universal fit has 3/8″ fip brass nut. Burst proof super-high tensile strength braided stainless steel protects pvc inner tube, ensuring maximum pressure and performance. Function faucet supply hose transfers water securely from water supply to faucet, includes two hoses.

 

Megairon 38 NPT Male x 10MM Double Ferrule Compression Tube FittingStainless Steel SS304 Male Straight Adapter #ad

Megairon 3/8″ NPT Male x 10MM Double Ferrule Compression Tube Fitting,Stainless Steel SS304 Male Straight Adapter

Megairon 3/8″ NPT Male x 10MM Double Ferrule Compression Tube Fitting,Stainless Steel SS304 Male Straight Adapter #ad - Push-to-connect fitting connects to pipes or tubing on one end and has an npt male connector on the other. This fitting has a double ferrule construction,reducing the possibility of leakage. Coupler for connecting two pipes in a straight run. Male npt threads on one end and a tube connection on the other. Made of stainless steel 304 for strength,lower carbon content for greater resistance to corrosion.

 

Megairon 12 05 CapNPT Female Threaded Cast Pipe FittingStainless Steel 304 #ad

Megairon 1/2″ 0.5″ Cap,NPT Female Threaded Cast Pipe Fitting,Stainless Steel 304

Megairon 1/2″ 0.5″ Cap,NPT Female Threaded Cast Pipe Fitting,Stainless Steel 304 #ad - Operating temperature range of -65 to +250 degrees f. Higher corrosion resistance,made from stainless steel 304 for strength. Cap for closing and terminating the end of a pipe or fitting. The cap is a stainless steel 304 cast pipe fitting with female national pipe taper (npt) threads for closing the end of a male pipe. Shapecap female, measurement 1/2″,connection npt.

 

Quickun Stainless Steel Reducing Hex Bushing 12 Male NPT to 18 Female NPT Reducer Bushing Pipe Hose Fitting #ad

Quickun Stainless Steel Reducing Hex Bushing, 1/2″ Male NPT to 1/8″ Female NPT, Reducer Bushing Pipe Hose Fitting

Quickun Stainless Steel Reducing Hex Bushing, 1/2″ Male NPT to 1/8″ Female NPT, Reducer Bushing Pipe Hose Fitting #ad - Adapter for connecting pipes or hoses of different end types,diameters,or materials. Typereducer bushing(male x female),connectionnpt-npt,measurement 1/2″ x 3/8″. This reducer hex bushing for connecting pipes or fittings with different end types, diameters, or materials. Temperature range from -30 to +150 degrees f maximum working pressure of 150 psi. Npt thread for creating tighter seals than straight threads.

 

Flextron FTGC-SS38-48 46 Gas Line Connector with 12 Outer Diameter and Nut Fittings Stainless Steel #ad

Flextron FTGC-SS38-48 46″ Gas Line Connector with 1/2″ Outer Diameter and Nut Fittings, Stainless Steel

Flextron FTGC-SS38-48 46″ Gas Line Connector with 1/2″ Outer Diameter and Nut Fittings, Stainless Steel #ad - The part meets the amse a112. 75 gas appliances and manufactured homes standards. The connector is rated for use in the temperature range of -40 f to 150 f and can be used up to a pressure of 0. Please consult the product information for the flow capacity for this part, for natural gas. On the ends of this 46″ long connecter are nut fittings. It can also endure up to 30 bends without leaks in water at a depth of maximum 2 inches and withstands 15 twists of 90 degrees, without showing signs of corrosion. It has an outer diameter of 1/2″ and an inner diameter of 3/8″ and is made of uncoated stainless steel. 5 psi. Each connector is 100% tested on leaks before it leaves the factory. The design has been tested on strength and it can withstand an internal hydrostatic pressure of 250 psi or 17 mpa without bursting or showing signs of leaks. 18. 24, z21. The connector can handle external temperatures of 800 f. 6 and ansi z21. 69 and z21. This is a flextron gas connector from their ss38 series of connectors, which is designed for indoor and outdoor use with gas dryers and water heaters.

 

Megairon 12mm 12 3 Way TEE Compression Plumbing Coupling Pipe FittingStainless Steel SS304 T Shaped Double Ferrule Connector #ad

Megairon 12mm 1/2″ 3 Way TEE Compression Plumbing Coupling Pipe Fitting,Stainless Steel SS304 T Shaped Double Ferrule Connector

Megairon 12mm 1/2″ 3 Way TEE Compression Plumbing Coupling Pipe Fitting,Stainless Steel SS304 T Shaped Double Ferrule Connector #ad - Maximum operating pressure rating of 250 psi at 70 degrees f ambient temperature. Tee with three openings for connecting and branching three pipes. 100% brand new and high quality. This fitting has a double ferrule construction,reducing the possibility of leakage. Made of stainless steel 304 for strength,lower carbon content for greater resistance to corrosion.

 

CellarBrew M22 x 15 Male Stainless Steel Threaded Pipe Fitting Countersunk Plug Internal Hex Head Socket with Flange and Brass Oring #ad

CellarBrew M22 x 1.5 Male Stainless Steel Threaded Pipe Fitting, Countersunk Plug Internal Hex Head Socket with Flange and Brass Oring

CellarBrew M22 x 1.5 Male Stainless Steel Threaded Pipe Fitting, Countersunk Plug Internal Hex Head Socket with Flange and Brass Oring #ad - 【Function】providing tight sealing and used for connecting,terminating,controlling flow,and changing the direction of piping in many different industries. 【Good to buy】m22 x 15 male stainless steel threaded pipe fitting is perfect choice for you to have. 【Durability】reusable, high rusting resistance in extreme environment, capability not to deform with time. 【material】countersunk plug internal hex head socket with flange and brass oring is made of 304 stainless steel. 【Ferrule design】the ferrule design enables the product to attain the withstanding of high pressure.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.