Drillco 200 Series 20 Piece High-Speed Steel Jobber Drill Bit Set, Black Oxide Finish, Round Shank, Spiral Flute, 118 Degrees Conventional Point, Size #61 – #80
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems. 20 piece jobber drill set. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge.
Jobber Drill Set, 115 PC, HSS, 118 Deg
- Size 1/16″, 5/64″ ,3/32″ ,7/64″, 1/8″, 9/64″ ,5/32″ ,11/64″ ,3/16″ ,13/64″ ,7/32″ ,15/64″, 1/4″ ,17/64″ ,9/32″ ,19/64″ ,5/16″ ,21/64″ ,11/32″ ,23/64″ ,3/8″,25/64″,13/32″,27/64″,7/16″,29/64″,15/32″,31/64″,1/2″. 29pcs hss jobber length titanium coated twist drill bits set in metal case. 118 degree point configuration is ideal for general purpose drilling applications. High quality material- high speed steel. For drilling in wood, metal and plastic each high speed steel bit is hardened and tempered for long life and high performance in tough application.
Drillco 500E Series 21 Piece Cobalt Steel Heavy-Duty Jobber Drill Bit Set, Bronze Finish, Round Shank, Spiral Flute, 135 Degrees Split Point, 1/16″ – 3/8″ in 1/64″ increments
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. High red hardness of cobalt permits speeds 30 percent greater than hss drills. Round shanks allow use with a wide variety of toolholding systems. 21 jobber length drill bits ranging in size from 1/16″ to 3/8″ in 1/64″ increments. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
Drillco 400N Series Nitro 29 Piece High-Speed Steel Heavy-Duty Jobber Drill Bit Set, Black and Gold Oxide Finish, Round Shank, Spiral Flute, 135 Degrees Split Point, 1/16″ – 1/2″ in 1/64″ increments
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools performance is similar to uncoated tools. 29 jobber length drill bits ranging in size from 1/16″ to 1/2″ in 1/64″ increment. Round shanks allow use with a wide variety of toolholding systems.
Dormer A190204 Jobber Drill Set, 1.0 mm – 13.0 mm x 0.5 mm Size
- Drill bits conform to din 338 standard. 118-degree conventional point for a range of drilling applications. Jobber length drill bit has a drilling depth up to four times its diameter. Black oxide finish reduces bit wear while promoting chip and coolant flow on ferrous material. High-speed steel (hss) provides hardness for wear resistance.
Jobber Drill Set, 21 PC, HSS, 118 Deg
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools performance is similar to uncoated tools. Round shanks allow use with a wide variety of toolholding systems. 29 jobber length drill bits ranging in size from 1/16″ to 1/2″ in 1/64″ increment. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
Drillco 400N Series Nitro 29 Piece High-Speed Steel Heavy-Duty Jobber Drill Bit Set, Black and Gold Oxide Finish, Round Shank, Spiral Flute, 135 Degrees Split Point, Drill Pal 1/16″ – 1/2″ in 1/64″ increments
- Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools performance is similar to uncoated tools. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 29 drill pal mechanics length drill bits ranging in size from 1/16″ to 1/2″ in 1/64″ increments.
Shars Tool 1/16″ to 1/2″ By 64ths Increment 115 Piece High Speed Steel Jobber Drill Set
- 118°. Pieces in set 115. Forged drill type. Black oxide finish. Sizes 1/16~1/2″ by 64ths, a~z, 1~60#.
Dormer A09730 General Purpose Jobber Drill Set, High Speed Steel, Bright/TiN Coated, 1/16″ – 1/2″ x 1/64″, Nr 1 – Nr 60, A-Z Size
- Special dormer ps 118-degree split-point angles are self-centering, to reduce walking, good for hard material, and to reduce pressure on cutting edges. Round shanks, for use on a variety of tool-holding systems. Variable length, for a wide range of applications. High-speed steel (hss), for use on a wide variety of materials. Uncoated (bright) finish with titanium nitride (tin) only at the tip, for hardness and heat resistance.
Kodiak Cutting Tools KCT120404 USA Made Cobalt Jobber Length Drill Set, Heavy Duty, 135 Degree, Split Point, Straw Finish, 1/16-1/2 x 64ths Size Range
- Drill set 1/16-1/2 x 64ths size range jobber length, heavy duty 135 point sty cobalt material straw finish drill set. .
Drillco 400 Series 115 Piece High-Speed Steel Heavy-Duty Jobber Drill Bit Set, Black Oxide Finish, Round Shank, Spiral Flute, 135 Degrees Split Point, includes: 1/16″ – 1/2″ in 1/64″ increments, Sizes #1 – 60 and A – Z
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. 115 jobber length drill bits ranging in size from 1/16″ to 1/2″ in 1/64″ increments, from #1 to #60, and from a to z.
Northland 089101 Jobber Drill Set, Cobalt, Uncoated, 1/16″-1/4″ by 64ths, 13 Piece
- Northland tool high quality cutting tools. Split point drill to prevent drill walking and for a faster starting hole. Heavy duty construction. Cobalt steel for drilling harder materials with better heat displacement.
Max-Power 29pcs HSS Jobber Length General Purpose Titanium Coated Twist Drill Bits Set 1/16″-1/2″ in Metal Case Drilling for Metal, Iron and Alloy
- High quality material- high speed steel. For drilling in wood, metal and plastic each high speed steel bit is hardened and tempered for long life and high performance in tough application. 118 degree point configuration is ideal for general purpose drilling applications. Size 1/16″, 5/64″ ,3/32″ ,7/64″, 1/8″, 9/64″ ,5/32″ ,11/64″ ,3/16″ ,13/64″ ,7/32″ ,15/64″, 1/4″ ,17/64″ ,9/32″ ,19/64″ ,5/16″ ,21/64″ ,11/32″ ,23/64″ ,3/8″,25/64″,13/32″,27/64″,7/16″,29/64″,15/32″,31/64″,1/2″. 29pcs hss jobber length titanium coated twist drill bits set in metal case.
Alfa Tools S250199 High-Speed Steel Split Point Eco Pro Jobber Drill Set, 115-piece
- Heavy duty web geometry provides added rigidity to resist tensional strain when drilling up to three times the drill diameter. Eco pro heavy duty jobber drills are ideal for portable or machine drilling in low-tensile strength alloy steels and for other applications. These drills meet all aircraft manufacturing standards and feature a heavy duty 135 degree split point for self-centering and quick penetration. (#53-#60 do not have a split point).
Viking Drill and Tool 88640 SP-60 Type 240-UB 135 Degree Split Point Magnum Super Premium Jobber Drill Set (60 Piece)
- 60 pc set premium high speed steel heavy duty nas 907b 135-degree split point. 135-degree split point, #1, #60. Precision ground point, flutes, body, clearance and drill diameter for ultimate accuracy and performance. Special hi-molybdenum tool steel/ gold oxide. Nas 907b heavy duty jobber.
Viking Drill and Tool 48350 AN-115 Type 240-BN 118 Degree General Purpose Jobber Drill Set (115 Piece)
- Titanium nitride coating extends tool life 500-percent performs well in abrasive wear applications. 1/16, 1/2, #1, #60, a- z by 64ths, 118-degree point. Spiral flutes with a higher flute angle to remove chips more easily. High speed steel provides good wear resistance, can be used in general purpose applications for ferrous and nonferrous materials. 115 pc set high speed steel tin-titanium nitride coated jobber 118-degree point nas 907a.
Viking Drill and Tool 60090 SP-25M Type 643-UB 135 Degree Split Point Magnum Super Premium Jobber Drill Set (118 Piece)
- 118 pc set premium metric jobber 135-degree split point nas 907b. 135-degree split point for accurate centering and fast penetration. Special hi-molybdenum tool steel/ gold oxide. Nas 907b heavy duty jobber. Precision ground point, flutes, body, clearance and drill diameter for ultimate accuracy and performance.
Viking Drill and Tool by Norseman 88660 SP-26 Type 240-UB 135 Degree Split Point Magnum Super Premium Jobber Drill Set (26 Piece)
- Special hi-molybdenum tool steel/ gold oxide. 135-degree split point, a, z. Nas 907b heavy duty jobber. Precision ground point, flutes, body, clearance and drill diameter for ultimate accuracy and performance. 26 pc set premium high speed steel heavy duty nas 907b 135-degree split point.
Dormer A191413 Jobber Drill Set, 1.5 mm – 6.5 mm x 0.5 mm + 3.3 mm, 4.2 mm Size
- 118-degree conventional point for a range of drilling applications. High-speed steel (hss) provides hardness for wear resistance. Set of 13 jobber length drill bits includes metric sizes 15 through 65 mm in 05 mm increments and sizes 33 and 42 mm. Black oxide finish reduces bit wear while promoting chip and coolant flow on ferrous material. Drill bits conform to din 338 standard.
Drillco 500 Series 115 Piece Cobalt Steel Heavy-Duty Jobber Drill Bit Set, Bronze Finish, Round Shank, Spiral Flute, 135 Degrees Split Point, includes: 1/16″ – 1/2″ in 1/64″ increments, Sizes #1 – 60 and A – Z
- 115 jobber length drill bits ranging in size from 1/16″ to 1/2″ in 1/64″ increments, from #1 to #60, and from a to z. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems. High red hardness of cobalt permits speeds 30 percent greater than hss drills. Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
GEKKOU GKSM17 17 PCMM COB 118DG JOBBERS DRILL SET
- Beautiful spiral swarf ejection of chips vs grind away small metal chips. Can be re-sharpened 4 times. Made in japan. M35 cobalt. 32° helix angle.
Drillco 400N Series Nitro 115 Piece High-Speed Steel Heavy-Duty Jobber Drill Bit Set, Black and Gold Oxide Finish, Round Shank, Spiral Flute, 135 Degrees Split Point, includes: 1/16″ – 1/2″ in 1/64″ increments, Sizes #1 – 60 and A – Z
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Round shanks allow use with a wide variety of toolholding systems. Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools performance is similar to uncoated tools. 115 jobber length drill bits ranging in size from 1/16″ to 1/2″ in 1/64″ increments, from #1 to #60, and from a to z.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
