23 Best Drill Mills in 2020

 

Micro 100 DMM-100-2120 120° Included Point Angle Drill Mill 2 Flute Metric Dimensions Solid Carbide Tool 10 mm Cutter Diameter 10 mm Shank Diameter 72 mm Overall Length 25 mm Flute Length #ad

Micro 100 DMM-100-2120 120° Included Point Angle Drill Mill, 2 Flute, Metric Dimensions, Solid Carbide Tool, 10 mm Cutter Diameter, 10 mm Shank Diameter, 72 mm Overall Length, 25 mm Flute Length

Micro 100 DMM-100-2120 120° Included Point Angle Drill Mill, 2 Flute, Metric Dimensions, Solid Carbide Tool, 10 mm Cutter Diameter, 10 mm Shank Diameter, 72 mm Overall Length, 25 mm Flute Length #ad - Each tool’s cutting edge/tip has a distinctive mirror like finish that significantly adds to material removal while improving surface finishes. Depending on the application, the drill mill can also be utilized as a chamfering tool as well. Micro 100 solid carbide tools feature more than just a micro-grain of excellent quality. Their substrate is in a class of its own resulting from exclusive treating processes that allow for vastly increased speed and feed rates. Tools can be utilized for both roughing and finishing. For over 45 years, micro 100 is a known industry leader and internationally acclaimed when it comes to solid carbide tooling. The micro 100 dmm-100-2120 metric size, uncoated , 2 flute, solid carbide, 120° included point angle, drill mill. Manufactured with close tolerances to ensure ultimate precision and performance. Designed and engineered to perform both drilling and milling applications when applicable.

 

Cobra Carbide 15406 Micro Grain Solid Carbide Regular Length General End Mill Uncoated Bright Finish 2 Flute 30 Degrees Helix Drill Point End 38 Cutting Length 332 Cutting Diameter 1-12 Length Pack of 1 #ad

Cobra Carbide 15406 Micro Grain Solid Carbide Regular Length General End Mill, Uncoated (Bright) Finish, 2 Flute, 30 Degrees Helix, Drill Point End, 3/8″ Cutting Length, 3/32″ Cutting Diameter, 1-1/2″ Length (Pack of 1)

Cobra Carbide 15406 Micro Grain Solid Carbide Regular Length General End Mill, Uncoated (Bright) Finish, 2 Flute, 30 Degrees Helix, Drill Point End, 3/8″ Cutting Length, 3/32″ Cutting Diameter, 1-1/2″ Length (Pack of 1) #ad - Can be used for drilling, slotting, chamfering and profile milling. Round shanks allow use with a wide variety of toolholding systems. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. 90 degrees drill point.

 

SHOP FOX M1111 6-Inch by 21-Inch Mill and Drill #ad

SHOP FOX M1111 6-Inch by 21-Inch Mill and Drill

SHOP FOX M1111 6-Inch by 21-Inch Mill and Drill #ad - Just put the machine in tapping mode, start the tap, and when the thread is completed, push the button at the end of the rack levers and the spindle reverses, immediately withdrawing the tap from the hole. However, this mill is further fortified with a quick-tilt headstock for horizontal milling, 1 hp brushless motor, a multi-function digital depth scale on the quill, push-button speed control and digital spindle tachometer. All of these extra features make the m1111 milling machine one of the most sought after machines available made in an iso 9001 factory. This m1111 milling machine has all of the important features of the m1110, but with a few extra time-saving luxuries. The quick reversing tapping feature also makes hole threading simple. The back-lit digital tachometer tells you the precise spindle speed for matching tooling and material.

 

10 PcsSet Double-Flute End Mill Titanium Coated Milliling Cutter 3175mm Shank 2mm Cutting Edge Diameter Drill Mill Bits #ad

10 Pcs/Set Double-Flute End Mill, Titanium Coated Milliling Cutter 3.175mm Shank 2mm Cutting Edge Diameter, Drill Mill Bits

10 Pcs/Set Double-Flute End Mill, Titanium Coated Milliling Cutter 3.175mm Shank 2mm Cutting Edge Diameter, Drill Mill Bits #ad - Sharp cutting edges, can be use for milling holes, grooves and edges on plates and the process will be smooth. These milling cutters are made of tungsten carbide steel with good milling, cutting performance, ensuring high work efficiency. Many items or materials can be engraved such as circuit boards, hardware parts, plastics, copper and stainless steel. Well polished surfaces are quite clean, neat, and there is no glitches or burrs on the shank. They have sufficient anti-bending strength, wear resistance, high hardness, high wear resistance and high strength.

 

Melin Tool CCMG-DP Carbide Drill Mill Uncoated Bright Finish 30 Deg Point Angle 4 Flutes 15 Overall Length 00938 Cutting Diameter 0125 Shank Diameter #ad

Melin Tool CCMG-DP Carbide Drill Mill, Uncoated (Bright) Finish, 30 Deg Point Angle, 4 Flutes, 1.5″ Overall Length, 0.0938″ Cutting Diameter, 0.125″ Shank Diameter

Melin Tool CCMG-DP Carbide Drill Mill, Uncoated (Bright) Finish, 30 Deg Point Angle, 4 Flutes, 1.5″ Overall Length, 0.0938″ Cutting Diameter, 0.125″ Shank Diameter #ad - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems. Available in 90 degree points. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Can be used for drilling, slotting, chamfering, and profile milling.

 

YXQ 516 HSS-AL 4 Flutes Straight Shank End Mill Router Drill Bit Machine Cutter 8mm #ad

YXQ 5/16 HSS-AL 4 Flutes Straight Shank End Mill Router Drill Bit Machine Cutter (8mm)

YXQ 5/16 HSS-AL 4 Flutes Straight Shank End Mill Router Drill Bit Machine Cutter (8mm) #ad - Cutting depth 22mm/ 7/8″shank diameter 79mm/ 5/16″. Total length 65mm/256″color as picture shown. Weight 27gpackage content 1 x straight shank end mill. Product name end millmaterial hss. Spec 4 flutecutting diameter 79mm/ 5/16″.

 

Micro 100 DM-250-490 4 Flute 90° Included Point Angle Drill Mill 14 Cutter Diameter 14 Shank Diameter 34 Flute Length 25 Overall Length Solid Carbide Tool #ad

Micro 100 DM-250-490 4 Flute 90° Included Point Angle Drill Mill, 1/4″ Cutter Diameter, 1/4″ Shank Diameter, 3/4″ Flute Length, 2.5″ Overall Length, Solid Carbide Tool

Micro 100 DM-250-490 4 Flute 90° Included Point Angle Drill Mill, 1/4″ Cutter Diameter, 1/4″ Shank Diameter, 3/4″ Flute Length, 2.5″ Overall Length, Solid Carbide Tool #ad - Each tool’s cutting edge/tip has a distinctive mirror like finish that significantly adds to material removal while improving surface finishes. Depending on the application, the drill mill can also be utilized as a chamfering tool as well. Micro 100 solid carbide tools feature more than just a micro-grain of excellent quality. Manufactured with close tolerances to ensure ultimate precision and performance. Tools can be utilized for both roughing and finishing. Their substrate is in a class of its own resulting from exclusive treating processes that allow for vastly increased speed and feed rates. For over 45 years, micro 100 is a known industry leader and internationally acclaimed when it comes to solid carbide tooling. The micro 100 dm-250-490 uncoated , 4 flute, solid carbide, 90° included point angle, drill mill. Designed and engineered to perform both drilling and milling applications when applicable.

 

Melin Tool A-DP Cobalt Steel Drill Mill Uncoated Bright Finish 30 Deg Point Angle 2 Flutes 39375 Overall Length 075 Cutting Diameter 075 Shank Diameter #ad

Melin Tool A-DP Cobalt Steel Drill Mill, Uncoated (Bright) Finish, 30 Deg Point Angle, 2 Flutes, 3.9375″ Overall Length, 0.75″ Cutting Diameter, 0.75″ Shank Diameter

Melin Tool A-DP Cobalt Steel Drill Mill, Uncoated (Bright) Finish, 30 Deg Point Angle, 2 Flutes, 3.9375″ Overall Length, 0.75″ Cutting Diameter, 0.75″ Shank Diameter #ad - Round shanks allow use with a wide variety of toolholding systems. Used for general purpose milling in most materials of medium and tough alloy materials such as stainless steel, nickel base alloy, brass, iron etc. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Can be used for drilling, slotting, chamfering, and profile milling. Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.

 

Drill America 1164 Carbide 4 Flute Single End End Mill MMO Series #ad

Drill America 11/64″ Carbide 4 Flute Single End End Mill, MMO Series

Drill America 11/64″ Carbide 4 Flute Single End End Mill, MMO Series #ad - 4 flute single end. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Available in polished finish. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.

 

RedLine Tools - 14 2500 Carbide Drill Mill AlTiN Coating 4 Flutes 7500 Flute Length 25000 OAL 30° Helix Angle 90° Point Angle 14 2500 Shank Diameter - RDM40416 #ad

RedLine Tools – 1/4 (.2500) Carbide Drill Mill, AlTiN Coating, 4 Flutes .7500 Flute Length, 2.5000 OAL, 30° Helix Angle, 90° Point Angle, 1/4 (.2500) Shank Diameter – RDM40416

RedLine Tools – 1/4 (.2500) Carbide Drill Mill, AlTiN Coating, 4 Flutes .7500 Flute Length, 2.5000 OAL, 30° Helix Angle, 90° Point Angle, 1/4 (.2500) Shank Diameter – RDM40416 #ad - 30° helix angle. Photos may not be the exact representation of products. 90° point angle. Altin coating. American made carbide.

 

6mm Carbon Steel Tyre Cutter Drill Mill for Puncture Repairs Tyre Plug 85mm335inch Tungsten Alloy #ad

6mm Carbon Steel Tyre Cutter Drill Mill for Puncture Repairs Tyre Plug 85mm(3.35inch) Tungsten Alloy

6mm Carbon Steel Tyre Cutter Drill Mill for Puncture Repairs Tyre Plug 85mm(3.35inch) Tungsten Alloy #ad - 1/4″ or 6mm tire repair carbide cutter. Used to remove debris and clean out the channel of damage caused during a tire puncture. The burr is made of durable carbide steel to stand up to hard use. Creates a clean, smooth channel for a better seal when using tire repair plug stems and stem patches. Choose the proper carbide cutter and plug stem based on puncture injury size.

 

Micro 100 DMM-080-4120 120° Included Point Angle Drill Mill 4 Flute Metric Dimensions Solid Carbide Tool 8 mm Cutter Diameter 8 mm Shank Diameter 63 mm Overall Length 22 mm Flute Length #ad

Micro 100 DMM-080-4120 120° Included Point Angle Drill Mill, 4 Flute, Metric Dimensions, Solid Carbide Tool, 8 mm Cutter Diameter, 8 mm Shank Diameter, 63 mm Overall Length, 22 mm Flute Length

Micro 100 DMM-080-4120 120° Included Point Angle Drill Mill, 4 Flute, Metric Dimensions, Solid Carbide Tool, 8 mm Cutter Diameter, 8 mm Shank Diameter, 63 mm Overall Length, 22 mm Flute Length #ad - Micro 100 solid carbide tools feature more than just a micro-grain of excellent quality. Manufactured with close tolerances to ensure ultimate precision and performance. Tools can be utilized for both roughing and finishing. The micro 100 dmm-080-4120 metric size, uncoated , 4 flute, solid carbide, 120° included point angle, drill mill. Designed and engineered to perform both drilling and milling applications when applicable. Their substrate is in a class of its own resulting from exclusive treating processes that allow for vastly increased speed and feed rates. For over 45 years, micro 100 is a known industry leader and internationally acclaimed when it comes to solid carbide tooling. Depending on the application, the drill mill can also be utilized as a chamfering tool as well. Each tool’s cutting edge/tip has a distinctive mirror like finish that significantly adds to material removal while improving surface finishes.

 

Cobra Carbide 15410 Micro Grain Solid Carbide Regular Length General End Mill TiAlN Coated 2 Flute 30 Degrees Helix Drill Point End 38 Cutting Length 332 Cutting Diameter 1-12 Length Pack of 1 #ad

Cobra Carbide 15410 Micro Grain Solid Carbide Regular Length General End Mill, TiAlN Coated, 2 Flute, 30 Degrees Helix, Drill Point End, 3/8″ Cutting Length, 3/32″ Cutting Diameter, 1-1/2″ Length (Pack of 1)

Cobra Carbide 15410 Micro Grain Solid Carbide Regular Length General End Mill, TiAlN Coated, 2 Flute, 30 Degrees Helix, Drill Point End, 3/8″ Cutting Length, 3/32″ Cutting Diameter, 1-1/2″ Length (Pack of 1) #ad - Can be used for drilling, slotting, chamfering and profile milling. Titanium aluminum nitride coatings become self-lubricating when used at very high speeds, making them ideal for cutting without coolant (“dry machining”). Round shanks allow use with a wide variety of toolholding systems. 90 degrees drill point. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.

 

Drill America 18 Carbide 2 Flute Double End Stub End Mill MMO Series #ad

Drill America 1/8″ Carbide 2 Flute Double End Stub End Mill, MMO Series

Drill America 1/8″ Carbide 2 Flute Double End Stub End Mill, MMO Series #ad - Hex shanks have six flats on their sides to reduce slippage when working in high-torque applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. 2 flute double end stub. Available in polished finish. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

 

RedLine Tools - 14 2500 Carbide Drill Mill AlTiN Coating 4 Flutes 7500 Flute Length 25000 OAL 30° Helix Angle 60° Point Angle 14 2500 Shank Diameter - RDM40116 #ad

RedLine Tools – 1/4 (.2500) Carbide Drill Mill, AlTiN Coating, 4 Flutes .7500 Flute Length, 2.5000 OAL, 30° Helix Angle, 60° Point Angle, 1/4 (.2500) Shank Diameter – RDM40116

RedLine Tools – 1/4 (.2500) Carbide Drill Mill, AlTiN Coating, 4 Flutes .7500 Flute Length, 2.5000 OAL, 30° Helix Angle, 60° Point Angle, 1/4 (.2500) Shank Diameter – RDM40116 #ad - 60° point angle. Altin coating. Photos may not be the exact representation of products. 30° helix angle. American made carbide.

 

Melin Tool AMG-DP Carbide Drill Mill AlTiN Monolayer Finish 30 Deg Point Angle 2 Flutes 15 Overall Length 0125 Cutting Diameter 0125 Shank Diameter #ad

Melin Tool AMG-DP Carbide Drill Mill, AlTiN Monolayer Finish, 30 Deg Point Angle, 2 Flutes, 1.5″ Overall Length, 0.125″ Cutting Diameter, 0.125″ Shank Diameter

Melin Tool AMG-DP Carbide Drill Mill, AlTiN Monolayer Finish, 30 Deg Point Angle, 2 Flutes, 1.5″ Overall Length, 0.125″ Cutting Diameter, 0.125″ Shank Diameter #ad - Available in 90 degree points. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Aluminum titanium nitride is similar to tialn but with a higher aluminum content for improved hardness and smoothness. Can be used for drilling, slotting, chamfering, and profile milling. Round shanks allow use with a wide variety of toolholding systems.

 

3 Axis CNC 3040 Router Engraver Machine Mini Drill Mill Motor DC Port 400W USB 110V 60HZ DIY 3D Cutter VFD #ad

3 Axis CNC 3040 Router Engraver Machine Mini Drill Mill Motor DC Port 400W USB 110V 60HZ DIY 3D Cutter VFD

3 Axis CNC 3040 Router Engraver Machine Mini Drill Mill Motor DC Port 400W USB 110V 60HZ DIY 3D Cutter VFD #ad - Spindle motor knob is useful for small positioning adjustment ,with steady and strong support structure cover plates reducing pollution for the screws and shafts. Large 3d engraving in soft wood,mdf board,native wood,pvc,acrylic we suggest use one or two spiral flute ball bits. The reinforced and thickened machine body make transportation absolutely to be safer and longer life time the chrome shafts is not easy to deform,suitable for long time use flexible coupling can be used for high torque transmission. More steady and strong equiped with aluminum alloy frame materials can be controlled by computer can control the engraving more precise. Can engraving much more materails by spiral flute bits,such as metal,steel,mdf board,solid wood,composite board plywood,stone.

 

Quality Tool Steel Drill Chuck Arobrs-Drill Mill Lathe Accessories- All ShanksTapersDrawbarsthread options available-Engineering Tools MT2 SHANK DRAWBAR STYLE- MOUNTING TAPER JT2 #ad

Quality Tool Steel Drill Chuck Arobrs-Drill, Mill, Lathe Accessories- All Shanks,Tapers,Drawbars,thread options available-Engineering Tools (MT2 SHANK DRAWBAR STYLE- MOUNTING TAPER JT2)

Quality Tool Steel Drill Chuck Arobrs-Drill, Mill, Lathe Accessories- All Shanks,Tapers,Drawbars,thread options available-Engineering Tools (MT2 SHANK DRAWBAR STYLE- MOUNTING TAPER JT2) #ad - Drill chuck arbors-made of quality tool steel. Shanks are hardened & precisely ground drawbar m10 x 15 tpi. Morse taper mt2- mounting taper is jt2 to mount the drill chuck on it. Fast shipping through trackable awb no to usa & worlwide.

 

JET 350017JMD-15 MillingDrilling Machine #ad

JET 350017/JMD-15 Milling/Drilling Machine

JET 350017/JMD-15 Milling/Drilling Machine #ad - Work lamp. 360 degree head swivel and extra large work table. Adjustable carbide facemill. Quick slide latch allows faster belt adjustment to change spindle speeds. Draw bar. One-piece cast iron column for added support. Belt cover with quick slide latch allows faster belt adjustment to change spindle speeds. Drill chuck guard. Tapered base allows for easier clean-up.

 

NCC 5Pcs YK20 Ground Inch Cemented Carbide Rods 14 Diameter and 2-12 Overall Length for Routers and Drills for High-speed Tooling Routers End Mills Reamers #ad

NCC 5Pcs YK20 Ground Inch Cemented Carbide Rods 1/4 Diameter and 2-1/2 Overall Length for Routers and Drills for High-speed Tooling Routers, End Mills, Reamers

NCC 5Pcs YK20 Ground Inch Cemented Carbide Rods 1/4 Diameter and 2-1/2 Overall Length for Routers and Drills for High-speed Tooling Routers, End Mills, Reamers #ad - With 100% cobalt, grain size of 06μm, density 145g/cm³. Suitable for milling and boring process on 50 hrc max, like steel, cast iron, aluminium alloy, etc. Recommended for making cemented carbide routers and drills. Grade yk20 (iso k20-k30), ground with chamfer, 1/42 1/2 inches (length tolerance 0~+00394 inches). Hardness 918hra, 1660hv30 trs 4100 n/mm², trs 595 kpsi kic 9 mpam1/2.

 

DAMEING Wooden Bead Maker Beads Drill Bit 20-45mm Carbide Peace Buckle Blade Milling Cutter Set 20Pcs Cemented Carbide Lucky Buckle Beads Woodworking Tool Kit #ad

DAMEING Wooden Bead Maker Beads Drill Bit 20-45mm Carbide Peace Buckle Blade Milling Cutter Set 20Pcs Cemented Carbide Lucky Buckle Beads Woodworking Tool Kit

DAMEING Wooden Bead Maker Beads Drill Bit 20-45mm Carbide Peace Buckle Blade Milling Cutter Set 20Pcs Cemented Carbide Lucky Buckle Beads Woodworking Tool Kit #ad - This carves perfect lucky buckle out of any piece of wood design your own jewelry, diy handicrafts, home decors and more. Each peace buckle comes out almost perfect that youll just need a little sanding or polishing after. The bead drill tools made by alloy steel material, high hardness, very durable in use, corrosion resistance and anti-rust. Designed for processing lucky buckle. Package include 20/22/25/30/33/36/40/45mm blade+1pcs shank+ 8pcs drill bits+1pcs hexagon wrench+2pcs hexagon socket screws.

 

Grizzly Industrial G0758Z - 6 x 20 34 HP MillDrill with DRO #ad

Grizzly Industrial G0758Z – 6″ x 20″ 3/4 HP Mill/Drill with DRO

Grizzly Industrial G0758Z – 6″ x 20″ 3/4 HP Mill/Drill with DRO #ad - And, when the going gets really tough, the headstock is equipped with a special shifter knob that allows you to drop power-transfer gearing down for maximum torque in the lowest rpm range. With its r-8 spindle taper, it can also make use of a wide variety of tooling. No split-decisions here-this is a great little machine specifications motor 600w (3/4 hp), dc, 110v, 10a spindle taper r-8 spindle travel 2″ swing 13-1/4″ max. This variable-speed mini mill/drill borrows from the heritage of our hugely popular g0704-with a high-torque (and quiet) 600w dc motor, super-rigid precision-ground dovetail headstock column and table ways, variable-speed spindle control from 50-2000 rpm, spindle speed dro, spindle depth dro (with inch/mm display and zeroing function), coarse and fine spindle downfeed, and precision handwheel control for x, y, and z-axis. Distance spindle-to-table 8-3/4″ head tilt 45° left & right head travel (z-axis) 8-1/4″ table travel (x-axis) 13-1/8″ table travel (y-axis) 4-1/2″ table size 5-3/4″w x 19-3/4″l t-slots 3 @ 1-1/2″ centers, 3/8″ wide spindle speed 50-2000 rpm shipping weight 204 lbs. If that’s not enough, this fiesty champ has one of the largest tables, table travel, and motor sizes in its class, allowing it to take on a huge range of workpiece sizes.

 

Quality Tool Steel Drill Chuck Arobrs-Drill Mill Lathe Accessories- All ShanksTapersDrawbarsthread options available-Engineering Tools MT2 SHANK TENG STYLE- MOUNTING TAPER JT2 #ad

Quality Tool Steel Drill Chuck Arobrs-Drill, Mill, Lathe Accessories- All Shanks,Tapers,Drawbars,thread options available-Engineering Tools (MT2 SHANK TENG STYLE- MOUNTING TAPER JT2)

Quality Tool Steel Drill Chuck Arobrs-Drill, Mill, Lathe Accessories- All Shanks,Tapers,Drawbars,thread options available-Engineering Tools (MT2 SHANK TENG STYLE- MOUNTING TAPER JT2) #ad - Drill chuck arbors-made of quality tool steel morse taper mt2- mounting taper is jt2 to mount the drill chuck on it. Teng style. Shanks are hardened & precisely ground.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.