Stark TH05 Compression Shear Head
- 5 mm carbide knives. Excellent for melamine, veneer or solid woods. Shear angle, turned towards the inside. Uses standard 30x12x1. 180 mm recommended for tenoners. Avoids chipping the veneer or laminate. For jointing or copy-shading board materials, veneered or laminated on one or both sides.
Kett Tool 95-20 5/8″ Capacity Fiber Cement Shear Head Complete
- . For cutting fiber-cement. Used on the kd-1495 shear. 5/8″ capacity steel shear head.
Kett 60-20 18 Gauge Shear Head Unit (for models KD-200, P-500, P-1060, B-100, K-100 and K-200)
- 18 gauge shear head. Fits on any kett pistol grip or straight handle motor. Double-cut shear. 60-20 shear head.
DEWALT DC490KA 18-Volt Cordless 18 Gauge Swivel Head Shear Kit
- Cordless tool allows user to take the tool to the work piece. Head swivels 360 degree which allows user to access tight quarters while maintaining comfort. Weighs 61 pounds. Cuts 7/32-inch strip which continuously curls out of the cutting area providing consistent and accurate cuts. Included with shear one-hour charger, two xrp batteries, blade wrench, and heavy-duty kit box.
Kett Tool 93-20 Shear Head
- Can be used in copper-to-copper, copper-to-aluminum, and aluminum-to-aluminum solid or stranded wire applications. Meets ansi c1194 requirements and is ul 486b listed. Rated for 600v and 90 degrees c. Shear housing. Insulation-piercing connector for tapping or splicing electrical lines.
Kett Tool 90-20 Shear Head
- Can be used in copper-to-copper, copper-to-aluminum, and aluminum-to-aluminum solid or stranded wire applications. Shear housing. Meets ansi c1194 requirements and is ul 486b listed. Rated for 600v and 90 degrees c. Insulation-piercing connector for tapping or splicing electrical lines.
Kett Tool 46-20L Complete 18 Gauge Profile Shear Head, Left Hand Cutting
- . Cuts profile and flat materials up to 18 gauge, spiral duct, wire mesh and many other materials. These snips are extremely light and maneuverable at 5 pounds, the kd-446l can cut tight curves at a radius of three inches. The blades are made of high quality steel, heat treated and precision ground. Kett 46-20l shear head for the kd-446l profile shear with left hand blades.
Kett Tool 70-20 Shear Head
- 8-inch steel blades cut smoothly and cleanly. Shear head complete assy. Friskers/wallace hedge shear with 8 inch cutting length hedge shears. Milwaukee 48-08-0500 18 gauge shear head assembly (acc). Kett 60-20 18 gauge shear head unit (for models kd-200, p-500, p-1060, b-100, k-100 and k-200).
Kett 80-20H Shear Head without 60-24 Eccentric Bearing Assembly
- Used for cutting pliable material. Stationary bottom blade. Produces a clean, flowing cut. The unique scissors action cuts light materials without fouling or gouging. The large rabbit ear blades funnel thick, soft materials into the scissor jaws.
Shear Head Complete Assy
- Non slip grips for safety and control. Shear head complete assy. Friskers/wallace hedge shear with 8 inch cutting length hedge shears. 8-inch steel blades cut smoothly and cleanly. Non-slip grips for safety and control.
Milwaukee 48-08-0500 Shear Head Assembly 18 Gauge
- The product is durable. . The product is easy to use. Assembly 18 ga shear head. The product is manufactured in china.
Kett Tool 42-20 Shear Head
- Rated for 600v and 90 degrees c. Can be used in copper-to-copper, copper-to-aluminum, and aluminum-to-aluminum solid or stranded wire applications. Shear housing. Insulation-piercing connector for tapping or splicing electrical lines. Meets ansi c1194 requirements and is ul 486b listed.
Kett 40-20 14 Gauge Steel Shear Head Unit (for models KD-440, P-540, P-1040, E-140 and KC-140)
- Fits on any kett pistol grip or straight handle motor. 16 gauge shear head. 40-20 shear head. 14 gauge steel shear head, used on kd-440, p-540, p-1040 and discontinued e-140 and kc-140 shears. Double-cut shear.
Shear Head Attachment Tools Equipment Hand Tools
- Replacement shear head attachment for 89218this product meets the oversized requirement per ups/fedex. The estimated shipping cost will include this fee. The shipping weight reflected is the dimensional weight. This product also meets the large package requirement per ups/fedex.
Milwaukee 48-08-0500 18 Gauge Shear Head Assembly (Acc)
- Shear head complete assy. Non-slip grips for safety and control. 8-inch steel blades cut smoothly and cleanly. Milwaukee 48-08-0500 18 gauge shear head assembly (acc). Friskers/wallace hedge shear with 8 inch cutting length hedge shears.
Kett Tool 41-20 Shear Head
- Can be used in copper-to-copper, copper-to-aluminum, and aluminum-to-aluminum solid or stranded wire applications. Insulation-piercing connector for tapping or splicing electrical lines. Meets ansi c1194 requirements and is ul 486b listed. Rated for 600v and 90 degrees c. Shear housing.
Kett 90-20H Shear Head without 60-24 Eccentric Bearing Assembly
- Saves valuable time and labor cutting the light gauge wires in terminal strips. Used for the kd-290 scissor shear. Originally developed for dismantling telephone installations. The unique scissors action of the “duck-bill” blades cuts quickly without fouling or jamming.
Kett Tool 46-20R Complete 18 Gauge Profile Shear Head, Right Hand Cutting
- Kett 46-20r shear head for the kd-446r profile shear with right hand blades. Cuts profile and flat materials up to 18 gauge, spiral duct, wire mesh and many other materials. These snips are extremely light and maneuverable at 5 pounds, the kd-446r can cut tight curves at a radius of three inches. The blades are made of high quality steel, heat treated and precision ground.
Kett 60-20 18 Gauge Shear Head Unit (for models KD-200, P-500, P-1060, B-100, K-100 and K-200) by Kett
- Milwaukee 48-08-0500 18 gauge shear head assembly (acc). 8-inch steel blades cut smoothly and cleanly. Shear head complete assy. Kett 60-20 18 gauge shear head unit (for models kd-200, p-500, p-1060, b-100, k-100 and k-200). Friskers/wallace hedge shear with 8 inch cutting length hedge shears.
Kett 60-23 18ga. alum. shear head
- Rated for 600v and 90 degrees c. Shear housing. Meets ansi c1194 requirements and is ul 486b listed. Can be used in copper-to-copper, copper-to-aluminum, and aluminum-to-aluminum solid or stranded wire applications. Insulation-piercing connector for tapping or splicing electrical lines.
K-Tool International (KTI89220) Shear Head Attachment
- Factory sealed. Shears replacement. Shear head attachment. Newauthorized dealer—-. Headmilwaukee model 48-08-0500.
New Milwaukee 48-08-0500 Replacement Shears Head Assembly 18 Gauge Sale
- Newauthorized dealer—-. Headmilwaukee model 48-08-0500. Shears replacement. Full factory warranty. Factory sealed.
K-Tool International (KTI89220) Shear Head Attachment by K-Tool International
- 56mm width. 3+3 alternate shear knives. 1-1/4″ bore. 4200-7500 rpm’s. K-tool international (kti89220) shear head attachment.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
