23 Top Carbide Rotary Files

 

uxcell 8mm x 20mm Double Cut Cylindrical Tungsten Carbide Rotary File Bit

uxcell 8mm x 20mm Double Cut Cylindrical Tungsten Carbide Rotary File Bit

uxcell 8mm x 20mm Double Cut Cylindrical Tungsten Carbide Rotary File Bit - Suitable for use on most air or electric grinding tools which accept 6mm shanks. Used for grinding, carving and shaping in steel, cast iron, brass, copper, hardwoods, plastics, etc. . The carbide rotary file can rotate at a very high speed, enabling it to manipulate the material it is working on.

 

Carving 3mm Shank 325 Tip Double Cut Tungsten Carbide Rotary File

Carving 3mm Shank 3/25″ Tip Double Cut Tungsten Carbide Rotary File

Carving 3mm Shank 3/25″ Tip Double Cut Tungsten Carbide Rotary File - Suitable for use on most air or electric grinding tools which accept 3mm shanks. Used for grinding, carving and shaping in steel, cast iron, brass, copper, hardwoods, plastics, etc. Specificationsdescriptionthe carbide can rotate at a very high speed, enabling it to manipulate the material it is working on. .

 

In-tool-home Tungsten Carbide Rotary File Burr Set 18 inch Shank Assorted Shapes Fit Dremel Electric Grinder Pack of 10

In-tool-home Tungsten Carbide Rotary File Burr Set 1/8″ inch Shank Assorted Shapes Fit Dremel Electric Grinder Pack of 10

In-tool-home Tungsten Carbide Rotary File Burr Set 1/8″ inch Shank Assorted Shapes Fit Dremel Electric Grinder Pack of 10 - Shank diameter 1/8-inch,1/4 inch head. Tungsten carbide single cut rotary burr set 1/8″ shank fit dremel. Do not run in excess of 30,000 rpm. Ideal for a wide range of hobby, repair, and renovation jobs. Constructed of high-speed steel,includes 6 different shapes straight, trim, beading, cove, slot cut.

 

uxcell 12mm x 32mm Single Cut Flame Shape Tungsten Carbide Rotary File Bit

uxcell 12mm x 32mm Single Cut Flame Shape Tungsten Carbide Rotary File Bit

uxcell 12mm x 32mm Single Cut Flame Shape Tungsten Carbide Rotary File Bit - Used for grinding, carving and shaping in steel, cast iron, brass, copper, hardwoods, plastics, etc. The carbide file can rotate at a very high speed, enabling it to manipulate the material it is working on. Suitable for use on most air or electric grinding tools which accept 6mm shanks.

 

uxcell 3mm x 6mm Double Cut Tungsten Carbide Rotary File Tool Set 10 Pcs

uxcell 3mm x 6mm Double Cut Tungsten Carbide Rotary File Tool Set 10 Pcs

uxcell 3mm x 6mm Double Cut Tungsten Carbide Rotary File Tool Set 10 Pcs - . Suitable for use on most air or electric grinding tools which accept 3mm shanks. The carbide can rotate at a very high speed, enabling it to manipulate the material it is working on. Used for grinding, carving and shaping in steel, cast iron, brass, copper, hardwoods, plastic , etc.

 

uxcell 16mm x 25mm Double Cut Cylindrical Head Tungsten Carbide Rotary File

uxcell® 16mm x 25mm Double Cut Cylindrical Head Tungsten Carbide Rotary File

uxcell® 16mm x 25mm Double Cut Cylindrical Head Tungsten Carbide Rotary File - The carbide file can rotate at a very high speed, enabling it to manipulate the material it is working on. . Suitable for use on most air or electric grinding tools which accept 6mm shanks. Used for grinding, carving and shaping in steel, cast iron, brass, copper, hardwoods, plastics, etc.

 

SPTA 20Pcs 183mm Shank Double Single Cut Tungsten Steel Solid Carbide Rotary Files Diamond Burrs Set With 3mm Twist Drill Bit Fits Dremel Tool for Woodworking Drilling Carving Engraving

SPTA 20Pcs 1/8″(3mm) Shank Double & Single Cut Tungsten Steel Solid Carbide Rotary Files Diamond Burrs Set With 3mm Twist Drill Bit Fits Dremel Tool for Woodworking Drilling Carving Engraving

SPTA 20Pcs 1/8″(3mm) Shank Double & Single Cut Tungsten Steel Solid Carbide Rotary Files Diamond Burrs Set With 3mm Twist Drill Bit Fits Dremel Tool for Woodworking Drilling Carving Engraving - Thank you package includes tungsten carbide cutter rotary burr set x 1(pack). Spta 20pcs 3mm shank double & single cut tungsten steel solid carbide rotary files diamond burrs set fits dremel tool for woodworking drilling carving engraving come with 5pcs 3mm twist drill bit and spta silicone wristbands 100% brand new and high quality easy to use , safe and reliable long service life type rotary burr material tungsten carbide shank diameter (sd) 3mm (about 1/8″) cutting edge diameter (ced) 3mm (about 1/8″) total length 38mm(approx) pack size 20pcs in a protection case note due to the difference between different monitors, the picture may not reflect the actual color of the item.

 

Tungsten Steel Carbide Rotary File Double Grain Milling Cutter Electric Grinding Head Accessories 3mm Shank

Tungsten Steel Carbide Rotary File Double Grain Milling Cutter Electric Grinding Head Accessories 3mm Shank

Tungsten Steel Carbide Rotary File Double Grain Milling Cutter Electric Grinding Head Accessories 3mm Shank - Can be used to process cast iron, cast steel, carbon steel, alloy steel, stainless steel, copper, aluminum, marble, jade,etc. Easy to grasp,use safety and reliable. Long service life. It can replace petiole wheel, and no dust pollution. Processing hardness up hra ≥ 85.

 

ZJchao 20 Pieces 18 Tungsten Carbide Rotary File Bit for Wood Carving Drilling and Cnc Router Engraving

ZJchao 20 Pieces 1/8′ Tungsten Carbide Rotary File Bit for Wood Carving, Drilling and Cnc Router Engraving

ZJchao 20 Pieces 1/8′ Tungsten Carbide Rotary File Bit for Wood Carving, Drilling and Cnc Router Engraving - Shank diameter 3mm(about 1/8”) grinding head diameter 3mm. Works with mostly small rotary tools for diy carving fans. Cutting bits for router, rotary tools, wood carving machine and cnc engraving machine. 20 pieces, double cut 10 pcs, single cut 10 pcs. Product length 385mm net weight 673g.

 

20pcs 3mm Shank Tungsten Steel Solid Carbide Rotary Files Diamond Burrs Set Fits Dremel Tool for Woodworking Drilling Carving Engraving

20pcs 3mm Shank Tungsten Steel Solid Carbide Rotary Files Diamond Burrs Set Fits Dremel Tool for Woodworking Drilling Carving Engraving

20pcs 3mm Shank Tungsten Steel Solid Carbide Rotary Files Diamond Burrs Set Fits Dremel Tool for Woodworking Drilling Carving Engraving - Box dimension 100x65x12mm box weight 268g. Product length 385mm net weight 673g. Shank diameter 3mm(about 1/8”) grinding head diameter 3mm. Totally 20 pieces, double cut 10 pcs, single cut 10 pcs. Works with mostly small rotary tools for diy carving fans.

 

uxcell 8mm x 16mm Oval Shape Double Cut Tungsten Carbide Rotary File Bit

uxcell 8mm x 16mm Oval Shape Double Cut Tungsten Carbide Rotary File Bit

uxcell 8mm x 16mm Oval Shape Double Cut Tungsten Carbide Rotary File Bit - Suitable for use on most air or electric grinding tools which accept 6mm shanks. Used for grinding, carving and shaping in steel, cast iron, brass, copper, hardwoods, plastics, etc. The carbide rotary file can rotate at a very high speed, enabling it to manipulate the material it is working on. .

 

uxcell 10mm x 20mm Cylinder Shape Single Cut Tungsten Carbide Rotary File Bit

uxcell 10mm x 20mm Cylinder Shape Single Cut Tungsten Carbide Rotary File Bit

uxcell 10mm x 20mm Cylinder Shape Single Cut Tungsten Carbide Rotary File Bit - Material tungsten carbidecolor silver tone gray. Weight 36gpackage content 1 x rotary file. Cutting size 10 x 20mm / 25/64″ x 25/32″ (dl)shank diameter 6mm/15/64″. Product name rotary filedesign cylinder shape, single cut. Total length 60mm/24″box size 25 x 23 x 82mm/1″ x 09″ x 32″(lwh).

 

Drill Warehouse 6pcs Double Cut Cylinder Tungsten Carbide Rotary File Cutter Bit 6mm Shank Tungsten Engraving Grinding Bit for Rotary Tools

Drill Warehouse 6pcs Double Cut Cylinder Tungsten Carbide Rotary File Cutter Bit 6mm Shank Tungsten Engraving Grinding Bit for Rotary Tools

Drill Warehouse 6pcs Double Cut Cylinder Tungsten Carbide Rotary File Cutter Bit 6mm Shank Tungsten Engraving Grinding Bit for Rotary Tools - High efficiency, high-quality finish, long service life, good economic returns. Processing all kinds of metal(including all sorts of hardened steel) and non-metal (such as marble, jade, bone). Shank size 6mm round shank, cutting edge diameter 127mm. Dual chamber is crossover lines, not easy to block the lines, more suitable for the object of relatively low density material. Machining hardness reach ¡Ýhra85 for the most work it can be replaced with small grinding wheel,and no dust pollution.

 

CSLU-Tool 10pcs 18 Shank Tungsten Steel Solid Carbide Rotary Files Diamond Burrs Set Fits Dremel Rotary Tool

CSLU-Tool 10pcs 1/8″ Shank Tungsten Steel Solid Carbide Rotary Files Diamond Burrs Set Fits Dremel Rotary Tool

CSLU-Tool 10pcs 1/8″ Shank Tungsten Steel Solid Carbide Rotary Files Diamond Burrs Set Fits Dremel Rotary Tool - Specification shaft diameter 3mm drill bit size 6mm compatibility smaller rotary tools such as those made by dremel included 10 tungsten steel solid burrs in a storage box it is recommended to use water as a lubricant when using these burrs. When the job or project is complete, you’ll be happy to place your burrs back into the compact storage case so you can store, organize, and transport this set for future use. All burrs in this set have a shank size of â…›” (3 mm), allowing them to be compatible with most die grinders and rotary tools as you shape, grind and finish your work with precision. Package included 10pcs rotary tools.

 

uxcell 12mm x 25mm Tree Shape Double Cut Tungsten Carbide Rotary File Tool

uxcell 12mm x 25mm Tree Shape Double Cut Tungsten Carbide Rotary File Tool

uxcell 12mm x 25mm Tree Shape Double Cut Tungsten Carbide Rotary File Tool - Used for grinding, carving and shaping in steel, cast iron, brass, copper, hardwoods, plastics, etc. The carbide file can rotate at a very high speed, enabling it to manipulate the material it is working on. Suitable for use on most air or electric grinding tools which accept 6mm shanks. .

 

20pcs 3mm Shank Tungsten Steel Solid Carbide Rotary Files Diamond Burrs Set Fits Dremel Tool for Woodworking Drilling Carving Engraving by KING

20pcs 3mm Shank Tungsten Steel Solid Carbide Rotary Files Diamond Burrs Set Fits Dremel Tool for Woodworking Drilling Carving Engraving by KING

20pcs 3mm Shank Tungsten Steel Solid Carbide Rotary Files Diamond Burrs Set Fits Dremel Tool for Woodworking Drilling Carving Engraving by KING - Shank diameter 3mm(about 1/8”) grinding head diameter 3mmtotally 20 pieces, double cut 10 pcs, single cut 10 pcsworks with mostly small rotary tools for diy carving fansproduct length 38. 8g. 5mm net weight 67. 3gbox dimension 100x65x12mm box weight 26.

 

uxcell 3mm Dia Tip Ball Nose Cone Double Cut Tungsten Carbide Rotary File

uxcell® 3mm Dia Tip Ball Nose Cone Double Cut Tungsten Carbide Rotary File

uxcell® 3mm Dia Tip Ball Nose Cone Double Cut Tungsten Carbide Rotary File - Used for grinding, carving and shaping in steel, cast iron, brass, copper, hardwoods, plastics, etc. The carbide file can rotate at a very high speed, enabling it to manipulate the material it is working on. . Suitable for use on most air or electric grinding tools which accept 3mm shanks.

 

uxcell 8mm x 20mm Single Cut Flame Shape Tungsten Carbide Rotary File Bit

uxcell 8mm x 20mm Single Cut Flame Shape Tungsten Carbide Rotary File Bit

uxcell 8mm x 20mm Single Cut Flame Shape Tungsten Carbide Rotary File Bit - Suitable for use on most air or electric grinding tools which accept 6mm shanks. . The carbide file can rotate at a very high speed, enabling it to manipulate the material it is working on. Used for grinding, carving and shaping in steel, cast iron, brass, copper, hardwoods, plastics, etc.

 

uxcell 12mm x 25mm Double Cut Cylindrical Tungsten Carbide Rotary File Bit

uxcell 12mm x 25mm Double Cut Cylindrical Tungsten Carbide Rotary File Bit

uxcell 12mm x 25mm Double Cut Cylindrical Tungsten Carbide Rotary File Bit - Used for grinding, carving and shaping in steel, cast iron, brass, copper, hardwoods, plastics, etc. Suitable for use on most air or electric grinding tools which accept 6mm shanks. The carbide rotary file can rotate at a very high speed, enabling it to manipulate the material it is working on.

 

Specialty Products Company 85127 38 Carbide Rotary File

Specialty Products Company 85127 3/8″ Carbide Rotary File

Specialty Products Company 85127 3/8″ Carbide Rotary File - . Specialty products company (spc) 85127, 3/8 inch carbide rotary file high quality carbide rotary files, ideal for elongating strut holes on many vehicles. May be used with 1/4 inch or 3/8 inch drills at high speeds. Use when installing 82110, 82120, 83400, 83410, 83420, 85500, and 87350 adjusters.

 

Uxcell Double Cut Cylinder Tungsten Carbide Rotary File Cutter Bit 12mmx23mm

Uxcell Double Cut Cylinder Tungsten Carbide Rotary File Cutter Bit, 12mmx23mm

Uxcell Double Cut Cylinder Tungsten Carbide Rotary File Cutter Bit, 12mmx23mm - Suitable for use on most air or electric grinding tools which accept 6mm shanks. The carbide point can rotate at a very high speed, enabling it to manipulate the material it is working on. Used for grinding, carving and shaping in steel, cast iron, brass, copper, hardwoods, plastics, etc.

 

uxcell 10mm x 25mm Conical Nose Single Cut Tungsten Carbide Rotary File

uxcell 10mm x 25mm Conical Nose Single Cut Tungsten Carbide Rotary File

uxcell 10mm x 25mm Conical Nose Single Cut Tungsten Carbide Rotary File - Suitable for use on most air or electric grinding tools which accept 6mm shanks. The carbide file can rotate at a very high speed, enabling it to manipulate the material it is working on. . Used for grinding, carving and shaping in steel, cast iron, brass, copper, hardwoods, plastics, etc.

 

uxcell 12mm x 10mm Single Cut Ball Shape Tungsten Carbide Rotary File Bit

uxcell 12mm x 10mm Single Cut Ball Shape Tungsten Carbide Rotary File Bit

uxcell 12mm x 10mm Single Cut Ball Shape Tungsten Carbide Rotary File Bit - Suitable for use on most air or electric grinding tools which accept 6mm shanks. The carbide can rotate at a very high speed, enabling it to manipulate the material it is working on. . Used for grinding, carving and shaping in steel, cast iron, brass, copper, hardwoods, plastics, etc.