23 Top Flush Trims

 

Bosch 85441M 1/2-Inch Diameter 1-Inch Cut Carbide Tipped Double Flute Flush Trim Router Bit 1/2-Inch Shank With Ball Bearing - All bits must be inserted in the full length of the collet be sure to use only router bits and accessories specifically designed for your router. Recommended for use with a routing table.

 

Yonico 14120 Flush Trim Solid Carbide Spiral Down-Cut Router Bit 1/4-Inch Shank - Satisfaction guaranteed and lifetime warranty. Down-cut spiral. Industrial quality router bits. C3 micro-grain tungsten carbide cutters. Solid carbide. Satisfaction guaranteed & lifetime warranty. Solid hardened steel bodies with anti-kickback design. Permanent forced on bearing retaining collar. Build-up and heat resistant teflon coating.

 

Freud 1/2″ Diameter Flush Trim Bit with Bearing with ½” Shank (42-114) - Two flutes provide faster cutting for a smooth, burn-free cut. Ideal for trimming laminate countertops and doing pattern work. Use on hand-held or table-mounted routers. Features freud’s tico hi-density carbide cuts for maximum durability and long life. Cuts all composition materials, plywoods, hardwoods, and softwoods.

 

Yonico 14982q Flush Trim Router Bit Top & Bottom Bearing with 1with1/2″ H 1/4″ Shank - The yonico 14982q top and bottom bearing router bit is great for all your trim applications. This bit can be used with either a top or bottom template. Especially useful for template work when routing rounded or curvy wood with sensitive end-grains. . The top and bottom bearings allow you to flip over the wood stock when you reach “up-grain” and rout that segment in a “down-grain” direction, maintaining uniform smoothness around the work-piece.

 

Amana Tool 45481 Flush Trim/Pattern Plunge 1/2-Inch Diameter by 3/8-Inch Cutting Height by 1/4-Inch Shank Carbide Tipped Router Bit - 2-1/4-inch length. 1/2-inch cutting diameter. 1/4-inch shank, 2 flute. 3/8-inch cutting height. Carbide tipped, industrial quality.

 

CMT 807.128.11 3-in-I Flush Trim Bit for MDF & Laminates, 1/4-Inch Shank, 1/2-Inch Cutting Length - 2 sinterhip hi-density industrial chrome carbide cutting edges. 1/2-inch cutting diameter, 2-9/64-inch length ideal on plastic laminates and aluminum laminates. Super-strength superior steel, non-stick orange shield coating. Non-freezing delrin bearing reduces the chance of bearing failure and doesn’t ruin work surface. Cmt bits were rated the best overall in comparison to other brand (test by wood magazine).

 

1/4″ Shank 3/8″ Cutting Dia End Bearing 2 Flutes Flush Trim Router Bit - Material metalcolor silver tone, red. Cutting depth 25mm / 1″total length 68mm / 27″. Net weight 31gpackage content 1 x flush trim bit1 x hard plastic case. Shank diameter 635mm / 1/4″cutting diameter 9mm / 3/8″. Product name flush trim bitstandard 1/4″ x 3/8″bearing diameter 952mm / 3/8″.

 

Amana Tool 45465 Flush Trim/Pattern Plunge 3/4-Inch Diameter by 1-3/4-Inch Cutting Height by 1/2-Inch Shank Carbide Tipped Router Bit - 1/2-inch shank, 2 flute. 3-3/4-inch length. 3/4-inch cutting diameter. 1-3/4-inch cutting height. Carbide tipped, industrial quality.

 

CMT 806.191.11 Super-Duty Flush Trim Bit, 1-Inch Cutting Length, 1/4-Inch Shank - 3/4-inch cutting diameter, 2-59/64-inch length. 2 hi-density carbide cutting edges and negative shear angle design for long-lasting performance. Equipped with a bearing for easy and efficient template work. Work quickly and safely to get a superior finish with absolute minimal chipping. For flush trimming on both natural wood and laminates.

 

Whiteside Router Bits 2408 Flush Trim Bit with 1/2-Inch Cutting Diameter and 2-Inch Cutting Length - Today, whiteside machine occupies a 40,000 sq. Primarily through repeat business and referrals, the tooling business continued to grow to meet a demand for quality production router bits as well as custom application tooling. As always, whiteside machine is continuously striving to improve our product through new technology, improved production techniques, and ongoing research and development efforts along with rigid quality control, vital customer feedback and extensive field testing. Manufacturing facility and produces a complete line of solid carbide and carbide tipped router bits. Ft. Made in america. A strong commitment to customer problem-solving, a can-do attitude, and innovative ideas, along with a growing core of dedicated employees, helped the business evolve into a manufacturer of woodworking equipment and tooling. Come on, give us a try. Located in western north carolina near the furniture manufacturing town of hickory, the company was often involved in making repairs or special parts for the furniture and woodworking field. Whiteside’s quality, innovation, and customer commitment is still present in our superb product line, in the design of custom tooling to fill special customer requirements, and in the development of special machinery and tooling for our own manufacturing use. Whiteside machine company has been in the router bit business for over 30 years providing customer with quality products while at the same time striving to achieve complete customer satisfaction. Whiteside machine company. Family owned and operated. Several woodworking magazines have tested whiteside versus the competition and selected whiteside as the winner for best router bits available in the market. Whiteside machine company was founded in 1970 as a general purpose machine shop in the basement of bill & bobbie whiteside’s home. Committed to quality.

 

uxcell 2 Pcs 10mm Cutting Dia Straight Shank Flush Trim Router Bit 1/4″x 3/8″ - Product name flush trim bitmaterial metal. Cutting diameter 10mm / 3/8″cutting depth 30mm / 1 1/8″. Color silver tone, blueshank diameter 6mm / 1/4″. Package content 2 pcs x flush trim bit. Total length 75mm / 3 “net weight 63g.

 

Whiteside Router Bits 2405 Flush Trim Bit with 1/2-Inch Cutting Diameter and 1-Inch Cutting Length - Several woodworking magazines have tested whiteside versus the competition and selected whiteside as the winner for best router bits available in the market. A strong commitment to customer problem-solving, a can-do attitude, and innovative ideas, along with a growing core of dedicated employees, helped the business evolve into a manufacturer of woodworking equipment and tooling. Come on, give us a try. Whiteside machine company was founded in 1970 as a general purpose machine shop in the basement of bill & bobbie whiteside’s home. Family owned and operated. Located in western north carolina near the furniture manufacturing town of hickory, the company was often involved in making repairs or special parts for the furniture and woodworking field. Committed to quality. Whiteside machine company has been in the router bit business for over 30 years providing customer with quality products while at the same time striving to achieve complete customer satisfaction. Primarily through repeat business and referrals, the tooling business continued to grow to meet a demand for quality production router bits as well as custom application tooling. Manufacturing facility and produces a complete line of solid carbide and carbide tipped router bits. Whiteside’s quality, innovation, and customer commitment is still present in our superb product line, in the design of custom tooling to fill special customer requirements, and in the development of special machinery and tooling for our own manufacturing use. Ft. As always, whiteside machine is continuously striving to improve our product through new technology, improved production techniques, and ongoing research and development efforts along with rigid quality control, vital customer feedback and extensive field testing. Whiteside machine company. Today, whiteside machine occupies a 40,000 sq. Made in america.

 

Yonico 14134 Flush Trim Router Bit with 2-Inch Long Cutter, Top and Bottom Bearing 1/2-Inch Shank - The top and bottom bearings allow you to flip over the wood stock when you reach “up-grain” and rout that segment in a “down-grain” direction, maintaining uniform smoothness around the work-piece. Especially useful for template work when routing rounded or curvy wood. The yonico 14134 top and bottom bearing router bit is great for all your large stock trim applications. This bit can be used with either a top or bottom template.

 

Whiteside Router Bits RFTD1600 1/8-Inch Cutting Diameter and Spiral Flush Trim Bit with Down Cut - Today, whiteside machine occupies a 40,000 sq. Come on, give us a try. Family owned and operated. Manufacturing facility and produces a complete line of solid carbide and carbide tipped router bits. Committed to quality. Located in western north carolina near the furniture manufacturing town of hickory, the company was often involved in making repairs or special parts for the furniture and woodworking field. Whiteside’s quality, innovation, and customer commitment is still present in our superb product line, in the design of custom tooling to fill special customer requirements, and in the development of special machinery and tooling for our own manufacturing use. Ft. Whiteside machine company was founded in 1970 as a general purpose machine shop in the basement of bill & bobbie whiteside’s home. Primarily through repeat business and referrals, the tooling business continued to grow to meet a demand for quality production router bits as well as custom application tooling. Several woodworking magazines have tested whiteside versus the competition and selected whiteside as the winner for best router bits available in the market. Whiteside machine company. Made in america. A strong commitment to customer problem-solving, a can-do attitude, and innovative ideas, along with a growing core of dedicated employees, helped the business evolve into a manufacturer of woodworking equipment and tooling. Whiteside machine company has been in the router bit business for over 30 years providing customer with quality products while at the same time striving to achieve complete customer satisfaction. As always, whiteside machine is continuously striving to improve our product through new technology, improved production techniques, and ongoing research and development efforts along with rigid quality control, vital customer feedback and extensive field testing.

 

Whiteside Router Bits RFT2100 1/4-Inch Diameter Spiral Flush Trim Up Cut - Whiteside machine company was founded in 1970 as a general purpose machine shop in the basement of bill & bobbie whiteside’s home. Whiteside machine company. Ft. Manufacturing facility and produces a complete line of solid carbide and carbide tipped router bits. Located in western north carolina near the furniture manufacturing town of hickory, the company was often involved in making repairs or special parts for the furniture and woodworking field. Come on, give us a try. Whiteside machine company has been in the router bit business for over 30 years providing customer with quality products while at the same time striving to achieve complete customer satisfaction. Primarily through repeat business and referrals, the tooling business continued to grow to meet a demand for quality production router bits as well as custom application tooling. Today, whiteside machine occupies a 40,000 sq. As always, whiteside machine is continuously striving to improve our product through new technology, improved production techniques, and ongoing research and development efforts along with rigid quality control, vital customer feedback and extensive field testing. Several woodworking magazines have tested whiteside versus the competition and selected whiteside as the winner for best router bits available in the market. A strong commitment to customer problem-solving, a can-do attitude, and innovative ideas, along with a growing core of dedicated employees, helped the business evolve into a manufacturer of woodworking equipment and tooling. Made in america. Committed to quality. Family owned and operated. Whiteside’s quality, innovation, and customer commitment is still present in our superb product line, in the design of custom tooling to fill special customer requirements, and in the development of special machinery and tooling for our own manufacturing use.

 

Whiteside Router Bits 2426 Flush Trim V-Groove Bit with 1/2-Inch Cutting Diameter and 1-Inch Cutting Length - Whiteside machine company. As always, whiteside machine is continuously striving to improve our product through new technology, improved production techniques, and ongoing research and development efforts along with rigid quality control, vital customer feedback and extensive field testing. Located in western north carolina near the furniture manufacturing town of hickory, the company was often involved in making repairs or special parts for the furniture and woodworking field. Made in america. Manufacturing facility and produces a complete line of solid carbide and carbide tipped router bits. A strong commitment to customer problem-solving, a can-do attitude, and innovative ideas, along with a growing core of dedicated employees, helped the business evolve into a manufacturer of woodworking equipment and tooling. Several woodworking magazines have tested whiteside versus the competition and selected whiteside as the winner for best router bits available in the market. Whiteside’s quality, innovation, and customer commitment is still present in our superb product line, in the design of custom tooling to fill special customer requirements, and in the development of special machinery and tooling for our own manufacturing use. Primarily through repeat business and referrals, the tooling business continued to grow to meet a demand for quality production router bits as well as custom application tooling. Come on, give us a try. Family owned and operated. Today, whiteside machine occupies a 40,000 sq. Ft. Whiteside machine company was founded in 1970 as a general purpose machine shop in the basement of bill & bobbie whiteside’s home. Committed to quality. Whiteside machine company has been in the router bit business for over 30 years providing customer with quality products while at the same time striving to achieve complete customer satisfaction.

 

Freud 3/4″ Diameter Flush Trim Bit Top Bearing with 1/2″ Shank (50-118) - The top mounted bearings on these bits make them ideal for grooving and routing out work pieces. Features freud’s tico hi-density carbide cuts for maximum durability and long life. Use on hand-held and table-mounted routers. Cuts all compostion materials, plywoods, hardwoods, and softwoods. Ideal for lettering and other template work.

 

Whiteside Router Bits 2407 Flush Trim Bit with 1/2-Inch Cutting Diameter and 1-1/2-Inch Cutting Length - Several woodworking magazines have tested whiteside versus the competition and selected whiteside as the winner for best router bits available in the market. Primarily through repeat business and referrals, the tooling business continued to grow to meet a demand for quality production router bits as well as custom application tooling. Whiteside’s quality, innovation, and customer commitment is still present in our superb product line, in the design of custom tooling to fill special customer requirements, and in the development of special machinery and tooling for our own manufacturing use. Located in western north carolina near the furniture manufacturing town of hickory, the company was often involved in making repairs or special parts for the furniture and woodworking field. As always, whiteside machine is continuously striving to improve our product through new technology, improved production techniques, and ongoing research and development efforts along with rigid quality control, vital customer feedback and extensive field testing. Manufacturing facility and produces a complete line of solid carbide and carbide tipped router bits. Come on, give us a try. Whiteside machine company has been in the router bit business for over 30 years providing customer with quality products while at the same time striving to achieve complete customer satisfaction. Today, whiteside machine occupies a 40,000 sq. Committed to quality. A strong commitment to customer problem-solving, a can-do attitude, and innovative ideas, along with a growing core of dedicated employees, helped the business evolve into a manufacturer of woodworking equipment and tooling. Whiteside machine company was founded in 1970 as a general purpose machine shop in the basement of bill & bobbie whiteside’s home. Ft. Whiteside machine company. Made in america. Family owned and operated.

 

EnPointâ„¢ Carbide Bottom Ball Bearing 2-Flute Straight Flush Trim Plunge Router Bit 1/4″ Shank 1/2″ Cut Dia 1-3/16″ Cut Length CNC Rosewood Plywood Laminate Template Pattern Routing Cutter - Used it for making solid surface counter top both free hand-held and in a table-mounted routers. The bearing sets away from the cutter and doesn’t get fouled with chips and adhesive and overheat. Mainly for high hardness of wood, such as solid wood panles, flakeboard, red oak, mdf and laminate. Carbide cutting edges produce a very smooth, clean finish that rarely requires sanding to finish. Trimmed in both directions, 2 flutes providing fast, smooth cuts and good finishes.

 

Yonico 14121 Solid Carbide Flush Trim Router Bit- Spiral Upcut 1/4-Inch Shank - 1/4″ shank. The yonico 14121 solid carbide flush trim upcut router bit is designed to provide extra clean and smooth flush trim cuts. Made from extremely durable solid carbide, the yonico 14121 is ideal for use with soft & hard woods, ply-woods, composites, laminates, plastics and some non-ferrous metals. The two independent ball bearing guides at the tip ensure smooth operation every time. New redesigned with permanent bearing retaining collar to reduce trimming mishaps. Spiral upcut router bits are ideally used for router table template applications causing wood shavings to spin downwards and away from work piece area.

 

CMT 806.690.11 Super-Duty Flush Trim Bit, 1/2-Inch Shank, 2-Inch Cutting Length, Carbide-Tipped - Super-strength superior steel, non-stick orange shield coating. For cutting hardwood/softwood, laminates use on router tables only, not for hand-held routers. 3/4-inch cutting diameter, 4-5/16-inch length, bearing included. 2 sinterhip hi-density industrial chrome carbide cutting edges. Cmt bits were rated the best overall in comparison to other brand (test by wood magazine).

 

Yonico 14137 Pattern/Flush Trim Router Bit with 3/4-Inch W X 1-1/2-Inch H 1/2-Inch Shank - Great for combined plunge-cutting and pattern and template routing. . In a router table, template will be positioned underneath the work piece. Can be used without the bearing as a standard straight bit. Shank 1/2″, width 3/4″, cutter height 1-1/2″. For increased work piece visibility, use in a handheld router allowing the template to be positioned on top of the work piece. Two flute carbide cutters with enclosed ball bearing.

 

Amana Tool 47092 Flush Trim with Ball Bearing Guide 1/4-Inch Diameter by 1-Inch Cutting Height by 1/4-Inch Shank Carbide Tipped Router Bit - Excellent for template work. 1/4-inch cutting diameter, for closer inside corner cutting only. 1/4-inch shank, 2 flute. 1-inch cutting height, 2-1/2-inch length. Carbide tipped, industrial quality.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.