24 Best and Coolest Weld Drill Bits

 

3pc Titanium Spot Weld Drill Bit Nib design to avoid slipping - It has flat shaft for sure grip and special centering. It is prevents bit dulling from overheating. Flat shafts are 1/4 5/16 3/8 cobalt. Its 1 ¾” (45mm) of length. . 3pc hsco titanium spot weld drill bit set has high speed cobalt bit and titanium coating. It has a nib which design to avoid slipping.

 

10mm HSCO Titanium Coated Spot Weld Drill Bit - This product also meets the large package requirement per ups/fedex. The shipping weight reflected is the dimensional weight. Features and benefits this bit is our 10. 0mm and the largest diameter high speed steel cobalt (hsco) spot weld bit we offer the twist is larger than the shank which is 8. The estimated shipping cost will include this fee. 0mm and has a flat spot on it to be tightened into our df-15 series spot weld drills specifically designed for the abuse of spot weld drilling flat ground for strength, centering nib to prevent walking our cobalt high speed steel mix bits are 1-3/4″ (450 mm) long and work with all brands of spot weld drills titanium is a heat resistant coating that extends drill life by about 50%. This product meets the oversized requirement per ups/fedex.

 

6.5mm HSCO Spot Weld Drill Bit Tools Equipment Hand Tools - 6. 5mm hsco spot weld drill bit tools equipment hand tools.

 

Century Drill and Tool 17680 Spot Weld Drill Bit, 8.00mm by Century Drill & Tool - Spot weld drill bit with modified center spur designed to cut welds on the top panel leaving the pack panel slightly penetratedmade from premium cobalt steel for a longer useful tool lifemade in the usa.

 

Spot Weld Drill Bit Set Spot Welder Bit Cutter Welding Spot Removal HSCO Bits (1/4, 5/16, 3/8 Titanium Bits) by GCG - 5mm (1/4) bit, 8mm (5/16) bit and 10mm (3/8) bitnib tipped design to increase accuracy and prevent slippingcommonly used to remove spot welds from automobile frameseach bit has a 45mm (1-3/4) shaft length with flat side for easy chuck hold on any spot weld drillincludes durable aluminum storage case with molded foam for a snug hold. Set includes 6.

 

Dent Fix Equipment DTF-DF-1780 8 Mm Hsco Spot Weld Drill Bit - Centering nib prevents bit from walking. . 8 mm hsco spot weld drill bit. Specifically designed for the rigors of spot weld drilling. These germany made bits can be used with any 38-inch drill. Features. 1 lbs. Case quantity, 1. Item weight, 0. .

 

Spot Weld Cutter Drill Bits 3) 5/16 Inch HSS Made in USA - (3 bits total). These are made in the usa and are the super premium grade cutter. These are very popular spot weld cutters sold to production body shops. This spot weld cutter set includes 3 of the 5/16 inch hss cutters. They are made from high quality hss tool steel. They work in common, inexpensive, electric or pneumatic drills. Included are instructions for spot weld cutting. There pilot point is designed to cut easily with minimum penitration to the underlying panels.

 

Viking Drill and Tool 37671 Twin End Type 187 Gold Cobalt Spot-Weld Drill Bit (5 Pack), 8mm/3.62″ - On our ultra bor super premium products, we routinely cut recognized tool tolerance standards by one half to insure that our customers receive drills manufactured to the tightest possible specification and utmost in consistency and accuracy. At viking drill and tool, skilled machine operators working with the world’s finest raw materials have the capability of providing you with consistent high quality products time after time, year after year. S. Paul, minnesota manufacturing facility is specifically designed for the unique task of efficient high quality cutting tool manufacturing. Our 74,000 square foot st. Our extensive selection of u. This standard, recognized as the most stringent in the industry precludes the use of lower quality steels which do not hold up under rigorous applications. S. Consistency is a natural by-product of our experience and dedication to quality. All materials used at viking drill and tool meet the rigorous qualifications of national aerospace standard (nas) 907. Our cutting tools are designed, engineered and superbly crafted to provide long lasting durability. Committed to quality, consistency, service and value quality at viking drill and tool begins with the finest tool steel we can buy and ends with the world class products in our catalog. The use of these extreme high quality materials insures that consistency is built in to every one of our u. Manufactured tools is designed to give you the right tool at the right price for whatever tough job you come up against. Manufactured products.

 

Magafor 888203H0800 Hard-X Carbide Spot Weld Drill Bit, 8 mm - 8mm hard-x carbide spot-weld drill. Easy installation. The product is manufactured in france.

 

29 Piece Double End And Spot Weld Drill Bit Assortment - 3size 8mm for 5/16″ spot welds pcs. 29 piece double end and spot weld drill bit assortmentcontains the following bits135 degree split point high speed steel double end drill bitssize 1/8″ (. 1875) pcs. 10size 3/16″ (. 3size 10mm for 3/8″ spot welds pcs. 125) pcs. 250) pcs. 5size 1/4″ (. 5cobalt spur point gold finish high speed steel spot weld drill bitssize 6mm for 1/4″ spot welds pcs. 3.

 

8mm HSCo Spot Weld Drill Bit Tools Equipment Hand Tools - The estimated shipping cost will include this fee. Features and benefits specialized head for efficient cutting of spot welds specialized head to maximum usage life of bit high speed steel and cobalt composition 8. 0 mm or 5/16th is most popular spot weld bit size 80 mm length for use in any drill this bit is purposefully designed to help the technician remove spot welds efficiently and full. This product meets the large package requirement per ups/fedex. All dent fix drill bits are precision made in germany. There are no plugs left behind to grind away. Use with any drill,  the high speed steel and cobalt (hsco) composition of this bit will maximize the cutting life. There is no pilot drill to break or create an unwanted hole.

 

HSCO Titanium Spot Weld Drill Bits 3Pc - ###############################################################################################################################################################################################################################################################.

 

Magafor 82290309000 Red-X Cobalt Spot Weld Drill Bit, 9.00 mm - . 9. The product is manufactured in france. Easy installation. 00mm red-x cobalt spot weld drill.

 

Dent Fix (DFXDF1465) 6.5mm HSCO Spot Weld Drill Bit by Dent Fix - Features and benefits this german made bit may be used with off brand spot weld drills the twist is smaller than the shank which is 8. 0mm and has a flat spot on it to be tightened into our df-15 series spot weld drills specfically designed for the abuse of spot weld drilling flat ground for strength, centering nib to prevent walking this cobalt high speed steel mix bit is 45mm long and works with all brands of spot weld drills. .

 

Dent Fix Equip 8mm Titanium Coated Spot Weld Drill Bit by Dent Fix - Dent fix equip 8mm titanium coated spot weld drill bit. Cobalt spot weld drill bit 8x80mm. 8mm hsco spot weld drill bit.

 

Magafor 82203080000 Cobalt Spot Weld Drill Bit with Revolver Handle, 5/16″ Diameter - Easy installation. 5/16 co spot weld drill w/revolver handle. The product is manufactured in france.

 

Spot Weld Drill Bit Set Spot Welder Bit Cutter Welding Spot Removal HSCO Bits (1/4″, 5/16″, 3/8″ Titanium Bits) - Includes durable aluminum storage case with molded foam for a snug hold. Nib tipped design to increase accuracy and prevent slipping. Each bit has a 45mm (1-3/4″) shaft length with flat side for easy chuck hold on any spot weld drill. Set includes 65mm (1/4″) bit, 8mm (5/16″) bit and 10mm (3/8″) bit. Commonly used to remove spot welds from automobile frames.

 

8mm HSCO Titanium Spot Weld Drill Bit Tools Equipment Hand Tools - . This product also meets the large package requirement per ups/fedex. 0mm and has a flat spot on it to be tightened into our df-15 series spot weld drills specifically designed for the abuse of spot weld drilling flat ground for strength, centering nib to prevent walkingthis cobalt high-speed steel mix bit is 45mm long and works with all brands of spot-weld drills. Features and benefits this is our most popular spot weld drill bit 8. The estimated shipping cost will include this fee. 0mm or 5/16th is the most common size of spot welds that need to be removed the titanium coating on this bit will help prevent the bit from dulling due to overheating the twist is the same size as the shank which is also 8. This product meets the oversized requirement per ups/fedex. Titanium (gold color) is a heat resistant coating that extends drill life by about 50%. The shipping weight reflected is the dimensional weight.

 

Genuine 1x Alpen HSS Cobalt Spot Weld Drill Bit 8X80 mm Tool DIY Accessories – Part Number TL538 by Alpen - Genuine 1x alpen hss cobalt spot weld drill bit 8×80 mm tool diy accessories, part number tl538. 8mm hsco spot weld drill bit. Dent fix equip 8mm titanium coated spot weld drill bit.

 

Spot Weld Cutter Drill Bits 3) 3/8 Inch Cobalt Made in USA - These are a very popular spot weld cutters sold to production body shops. . They are made from high quality cobalt tool steel, which is even stronger than hss. There pilot point is designed to cut easily with minimum penitration to the underlying panels. Included are instructions for spot weld cutting. (3 bits total). This spot weld cutter set includes 3 of the 3/8 inch cobalt cutters. They work in common, inexpensive, electric or pneumatic drills. These are made in the usa.

 

Dent Fix Equipment Df1610 and Spot Weld Drill Bit 10Mm Hsco and Germany - Our cobalt high speed steel mix bits are 1-3/4 in (450 mm) long and work with all brands. This bit is our 100 mm and the largest diameter high speed steel cobalt (hsco) spot weld bit. Specifically designed for the abuse of spot weld drilling. Flat ground for strength, centering nib to prevent walking. The twist is larger than the shank which is 80mm and has a flat spot on it to be tightened into our.

 

Cobalt Spot Weld Drill Bit 8X80Mm - Unit material -steel. Product type -titanium drill bits. Use material -metal. Dimensions overall product weight -1 pounds. Generic dimensions -can be used with any 3/8” drill. Df1780 features -cobalt spot weld drill bit. -Made in germany. -Specifically designed for the rigors of spot weld drilling.

 

Dent Fix Equip 8mm Titanium Coated Spot Weld Drill Bit - Made in germany. Dent fix equip 8mm titanium coated spot weld drill bit dent-fix drill bits a specifically designed for the abuse of spot weld drilling. Flat ground for strength, centering nib to prevent walking. Titanium heat resistant coating extends drill life by 50%. Genuine dent-fix replacement part for use with the annihilator spot weld drill.

 

Malco SW3 5/16-Inch Spot Weld Cobalt Drill Bit - Removal of spot welds by this method is accomplished without drilling through both joined metal panels. Remaining panel requires minimal surface grinding. Long-life, 5/16-in cobalt, steel drill bit features a self-centering, non-walking, shallow design. The squared-off drill bit tip leaves a precise, clean hole only in the panel to be removed.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.