Steel City 55151-1/2-3/4 4-Inch Diameter 1-1/2-Inch Deep 15.8-Cubic Inch Pre-Galvanized Steel Octagon Box Extension Ring
, Ul listed. Mounts directly on top of the octagon box. Used when you need to add extra wire capacity. Drawn construction. Use with conduits.
Steel City 53151 1/2 3/4 Pre-Galvanized Steel Square Box Extension Ring with 1/2-Inch and 3/4-Inch Knockouts
, Drawn construction. Used when you need to add extra wire capacity. Mounts directly on top of the square box. Ul listed. Allows you to add circuits.
Genuine Unistrut P1000T 1-5/8″ 12 Gauge Strut Channel, Slotted Back, Pre-Galvanized 5 Foot Length
, Silver finish pre-galvanized zinc astm a653. 12 gage steel strut channel. 9/16″ x 1-1/8″ slotted back channel. 1-5/8″ x 1-5/8″ square. Genuine unistrut brand.
Steel City 54151CFB-BHL-OW Pre-Galvanized Steel Octagon Ceiling Fan Support Box with Old Work Bar Hanger and 1/2-Inch Knockouts
, Ul listed. Bar is expandable 16-inch to 24-inch. For use with non-metallic sheathed cable. 16-inch span the bar can hold 70-pound fans and 200-pound fixtures. 24-inch span the bar can hold 35-pound fans and 50-pound fixtures.
Steel City 521511234EW Pre-Galvanized Steel Square Box with 1/2-Inch and 3/4-Inch Knockouts
, Steel, 4” x 4” x 1 1/2” d. (12) 1/2” and (4) 3/4” knockouts on sides, three 1/2” and two 3/4” knockouts on bottom. , Welded. Uses tko technology designed with 1/2” knockout slightly off center from the 3/4” so the tangs of 1/2” locknut bite into the metal box. In. , 21 cu. Ul listed.
Steel City 2G4D 1/2 3/4 Pre-Galvanized Steel Double Gang Square Box with 1/2-Inch and 3/4-Inch Knockouts
, Ul listed. 2 gang. , 30. (2) 1/2”, (1) 3/4” knockouts on each side and end, (3) 1/2”, (2) 3/4” knockouts on bottom. In. With device ears. Steel, 4” x 4” x 2 1/8” d. 3 cu. For use with conduit.
Steel City 479-GFI Pre-Galvanized Steel Square Box Surface Cover with One GFI Device
, Disconnects power from the circuit when a dangerous electrical condition exists. Stamped with mounting holes that line up to fit the outlet box. Raised 1/8-inch. Comes with necessary screws for mounting. Ul listed.
Steel City 474-BW Pre-Galvanized Steel Square Box Surface Cover with One Single Device
, Covers exposed wires protecting you from shock. Comes with necessary screws for mounting. Ul listed. Stamped with mounting holes that line up to fit the outlet box. Raised 1/8-inch.
Steel City 521711234EP Pre-Galvanized Steel Square Box with Ground Bump, 1/2-Inch and 3/4-Inch Eccentric Knockouts and Solid Wire Pigtail
, Protects device from damage. Ul listed. Welded construction. Pre-installed no12 10-1/2-inch solid wire pigtail. For use with conduits.
Steel City 53151 1/2 Pre-Galvanized Steel Square Box Extension Ring with 1/2-Inch Knockouts
, Capacity drawn construction with 1/2″ knockouts pre-galvanized steel octagon box extension ring mounts directly on top of the square box allows you to add circuits. Highlights size 4″ x 1-1/2″ 21 cu. In.
Steel City 2G4DV 1/2 3/4 Pre-Galvanized Steel Double Gang Square Box with CV-Bracket and 1/2-Inch and 3/4-Inch Knockouts
, Drawn construction. Protects device from damage. Holds two devices. Mounts to the flat side of a stud using a cv-bracket. Ul listed.
Steel City 52151-3/4W Pre-Galvanized Steel Square Box with 1/2-Inch and 3/4-Inch Knockouts
, Capacity welded construction with 1/2″ and 3/4″ knockouts pre-galvanized steel square box for use with conduit welded construction protects device from damage ul listed. Highlights size 4″ x 1-1/2″ 21 cu. In.
Steel City 54171-1/2-F-CFB-BP Pre-Galvanized Octagon Ceiling Fan Support Box with F-Bracket and 1/2-Inch Knockouts
, Ul listed. Drawn construction. Mounts to the side of a stud using a flat bracket. Maximum load of 35-pound for fans and 50-pound for fixtures. Intended for use with a bulk pack conduit.
Steel City 52 PD 1 4-Inch Box 2-1/8-Inch Deep Pre-Galvanized Steel Square Box Partition
, Ul listed. Raised 1-inch. For use with a two device square cut tile wall cover. Prevents electrical interference and disturbance all the way up to the finished surface. Separates line voltage and low voltage into one compartment.
Steel City 480-BW Pre-Galvanized Steel Square Box Surface Cover with One Center Toggle Switch
, Comes with necessary screws for mounting. Ul listed. Has two countersunk screw holes. Stamped with mounting holes that line up to fit the outlet box. Raised 1/8-inch.
Steel City 53171 1 Pre-Galvanized Steel Square Box Extension Ring with 1-Inch Knockouts
, Mounts directly on top of the square box. Allows you to add circuits. Ul listed. Used when you need to add extra wire capacity. Welded construction.
Steel City 58-C-4 Steel City, 4 in. x 2-1/8 in. Utility Device Cover, 1-19/32 in. Hole Dia., Pre-Galvanized Steel,
, For use with 4-wire twist-lock single flush receptacle, hole diameter, 1-19/32 inch. Pre-galvanized steel utility device cover, 4 inch x 2 1/8 inch, 1/4 inch raised.
Steel City 54151-CFB Pre-Galvanized Steel Octagon Ceiling Fan Support Box with C-5 Non-Metallic Cable Clamps and 1/2-Inch Knockouts
, Recommended for earthquake areas. Maximum fixture weight is 150 lb. 1 1/2” deep. In. 5 cu. Exceeds national electrical code requirements. . Contains 4” octagon box with all necessary hardware to mount a ceiling fan when a cross member brace is used. , Maximum fan weight is 70 lb. 15.
Steel City 52151-1/2-3/4 Pre-Galvanized Steel Square Box with 1/2-Inch and 3/4-Inch Knockouts
, , 21 cu. , Drawn. Steel, 4” x 4” x 1 1/2” d. (8) 1/2” and (4) 3/4” knockouts on sides, (3) 1/2” and (2) 3/4” knockouts on bottom. In. Ul listed.
Steel City 531711234 Pre-Galvanized Steel Square Box Extension Ring with 1/2-Inch and 3/4-Inch Knockouts
, Welded construction. Mounts directly on top of the square box. Ul listed. Allows you to add circuits. Used when you need to add extra wire capacity.
Steel City 478 Pre-Galvanized Steel Square Box Surface Cover with 4-Wire Twist Lock Device
, Ul listed. Raised 1/8-inch. Stamped with mounting holes that line up to fit the outlet box. Comes with necessary screws for mounting. More reliable connection with commercial and industrial settings, where vibration or incidental impact could disconnect a non-locking connector.
Steel City 531511234UB Pre-Galvanized Steel Square Box Extension Ring with 1/2-Inch and 3/4-Inch Knockouts
, Ul (underwriter’s laboratories) listed. 5 cu. In., Construction type welded, width 4″, height 4″, depth 1-1/2″, cubic inches 22. Attaches to 1 or 2 gang switch box. , 22. Steel city welded construction square box extension, steel, 4″ x 4″ x 1-1/2″ d. 5 cu in, material steel, shape square, knockouts (8) 1/2″ & (4) 3/4″, ul listed yes, pkg qty 1. (8) 1/2″ and (4) 3/4″ knockouts.
Steel City 52171-1 Pre-Galvanized Steel Square Box with Ground Bump and 1/2-Inch and 3/4-Inch Eccentric Knockouts
, Protects device from damage. Ul listed. Ground screw bump improves the repositioning of the grounding conductor. Welded construction. For use with conduits.
Steel City 472-NEC Pre-Galvanized Steel Square Box Surface Cover with Two Duplex Devices
, Ul listed. Comes with necessary screws for mounting. Stamped with mounting holes that line up to fit the outlet box. Covers exposed wires protecting you from shock. Raised 1/8-inch.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
