Best 15 Drill Blanks

 

Drill America DWD29J-DB-SET Qualtech 29 Piece High-Speed Steel Jobber Length Drill Blank Set in Metal Case Black Oxide Finish Round Shank Pack of 1

Drill America DWD29J-DB-SET Qualtech 29 Piece High-Speed Steel Jobber Length Drill Blank Set in Metal Case, Black Oxide Finish, Round Shank (Pack of 1)

Drill America DWD29J-DB-SET Qualtech 29 Piece High-Speed Steel Jobber Length Drill Blank Set in Metal Case, Black Oxide Finish, Round Shank (Pack of 1) - High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Round shanks allow use with a wide variety of toolholding systems. 29 piece drill blank set comes in a metal case. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge.

 

E 2500 HSS Drill Blank 2 Pieces

“E” (.2500″) HSS Drill Blank (2 Pieces.)

“E” (.2500″) HSS Drill Blank (2 Pieces.) - 6251″ to 1. S. 005mm), from. 0003 or -. 5001″ to. 008mm), from. Republic blanks have been used for many purposes over the years. With tight dimensional tolerances, republic drill blanks are perfect for any project needing precise finished ground stock. 013mm). 6250″ (-. 0002″ or. Republic h. Drill blank tolerances up to. 0000″ (-. Blanks have been used as shafts, arbors, guide rods, rollers, gages, alignment pins, punches, knockout pins, as well as for stock in the manufacturing of specialty tools and instruments. 0005″ or -. S. 5000″ (-. Precision ground, specifically made as blanks for precision drills.

 

Drill Blank - Size 56 0465 OAL 1-34 10 Pcs

Drill Blank – Size: #56 (.0465″), OAL 1-3/4″ (10 Pcs.)

Drill Blank – Size: #56 (.0465″), OAL 1-3/4″ (10 Pcs.) - Includes 2 pieces. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 26 piece drill blank set comes in a metal case. Includes 10 pieces.

 

Drill Blank - Size 58 0420 OAL 1-58 10 Pcs

Drill Blank – Size: #58 (.0420″), OAL 1-5/8″ (10 Pcs.)

Drill Blank – Size: #58 (.0420″), OAL 1-5/8″ (10 Pcs.) - S. Blanks have been used as shafts, arbors, guide rods, rollers, gages, alignment pins, punches, knockout pins, as well as for stock in the manufacturing of specialty tools and instruments. 0003 or -. 5001″ to. 6250″ (-. 013mm). 0002″ or. 008mm), from. 5000″ (-. S. Meda blanks have been used for many purposes over the years. 6251″ to 1. Drill blank tolerances up to. Precision ground, specifically made as blanks for precision drills. 005mm), from. 0000″ (-. With tight dimensional tolerances, meda drill blanks are perfect for any project needing precise finished ground stock. Meda h. 0005″ or -.

 

I 2720 HSS Drill Blank 2 Pieces

“I” (.2720″) HSS Drill Blank (2 Pieces.)

“I” (.2720″) HSS Drill Blank (2 Pieces.) - . Drill blank tolerances up to. With tight dimensional tolerances, republic drill blanks are perfect for any project needing precise finished ground stock. 0002″ or. 6251″ to 1. 0005″ or -. 6250″ (-. Blanks have been used as shafts, arbors, guide rods, rollers, gages, alignment pins, punches, knockout pins, as well as for stock in the manufacturing of specialty tools and instruments. S. Republic h. Precision ground, specifically made as blanks for precision drills. 013mm). 008mm), from. Republic blanks have been used for many purposes over the years. 0000″ (-. S. 5000″ (-. 5001″ to. 0003 or -. 005mm), from.

 

Chicago Latrobe 165 Series High-Speed Steel Drill Blank Set with Metal Case Uncoated Bright Finish Inch 29-piece 116 - 12 in 164 increments

Chicago Latrobe 165 Series High-Speed Steel Drill Blank Set with Metal Case, Uncoated (Bright) Finish, Inch, 29-piece, 1/16″ – 1/2″ in 1/64″ increments

Chicago Latrobe 165 Series High-Speed Steel Drill Blank Set with Metal Case, Uncoated (Bright) Finish, Inch, 29-piece, 1/16″ – 1/2″ in 1/64″ increments - Uncoated (bright) finish is an untreated surface that can be used on a range of materials, especially soft metals. High-speed steel (hss) provides hardness for wear resistance. Metal index case has labeled compartments for identification and organization of drill blanks. Tight diameter tolerance for precision drilling or measuring applications. Set of 29 drill blanks includes inch sizes 1/16″ through 1/2″ in 1/64″ increments.

 

Drill America DWD13J-DB-SET HSS Drill Blank Set 116-14 x 64ths 13 Piece Set in Metal Case

Drill America DWD13J-DB-SET HSS Drill Blank Set, 1/16-1/4 x 64ths, 13 Piece Set in Metal Case

Drill America DWD13J-DB-SET HSS Drill Blank Set, 1/16-1/4 x 64ths, 13 Piece Set in Metal Case - 1/16-1/4 x 64ths hss drill blank set, 13 piece set in metal case. .

 

Drill America DWD26J-DB-SET Qualtech 26 Piece High-Speed Steel Jobber Length Drill Blank Set in Metal Case Black Oxide Finish Round Shank Pack of 1

Drill America DWD26J-DB-SET Qualtech 26 Piece High-Speed Steel Jobber Length Drill Blank Set in Metal Case, Black Oxide Finish, Round Shank (Pack of 1)

Drill America DWD26J-DB-SET Qualtech 26 Piece High-Speed Steel Jobber Length Drill Blank Set in Metal Case, Black Oxide Finish, Round Shank (Pack of 1) - Round shanks allow use with a wide variety of toolholding systems. 26 piece drill blank set comes in a metal case. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

 

Drill Blank - Size 300 MM 1181 OAL 2-34 3 Pcs

Drill Blank – Size: 3.00 MM (.1181″), OAL: 2-3/4″ (3 Pcs.)

Drill Blank – Size: 3.00 MM (.1181″), OAL: 2-3/4″ (3 Pcs.) - With tight dimensional tolerances, republic drill blanks are perfect for any project needing precise finished ground stock. Precision ground, specifically made as blanks for precision drills. Drill blank tolerances up to. 008mm), from. 0000″ (-. 6251″ to 1. S. S. Blanks have been used as shafts, arbors, guide rods, rollers, gages, alignment pins, punches, knockout pins, as well as for stock in the manufacturing of specialty tools and instruments. 0002″ or. Republic blanks have been used for many purposes over the years. 5001″ to. Republic h. 0003 or -. 5000″ (-. 6250″ (-. 013mm). 0005″ or -. 005mm), from.

 

69 0292 HSS Drill Blank 5 Pieces

#69 (.0292″) HSS Drill Blank (5 Pieces.)

#69 (.0292″) HSS Drill Blank (5 Pieces.) - Republic blanks have been used for many purposes over the years. 013mm). 6251″ to 1. Republic h. With tight dimensional tolerances, republic drill blanks are perfect for any project needing precise finished ground stock. 008mm), from. S. 5000″ (-. 6250″ (-. Drill blank tolerances up to. 0002″ or. 0005″ or -. 0000″ (-. S. 5001″ to. 0003 or -. Blanks have been used as shafts, arbors, guide rods, rollers, gages, alignment pins, punches, knockout pins, as well as for stock in the manufacturing of specialty tools and instruments. 005mm), from. Precision ground, specifically made as blanks for precision drills.

 

Drill Blank - Size 38 3750 OAL 5 2 Pcs

Drill Blank – Size: 3/8″ (.3750″), OAL 5″ (2 Pcs.)

Drill Blank – Size: 3/8″ (.3750″), OAL 5″ (2 Pcs.) - 6251″ to 1. 008mm), from. 5000″ (-. S. 0003 or -. With tight dimensional tolerances, meda drill blanks are perfect for any project needing precise finished ground stock. 5001″ to. 013mm). Meda h. Precision ground, specifically made as blanks for precision drills. 0005″ or -. 0002″ or. 6250″ (-. Blanks have been used as shafts, arbors, guide rods, rollers, gages, alignment pins, punches, knockout pins, as well as for stock in the manufacturing of specialty tools and instruments. Meda blanks have been used for many purposes over the years. 005mm), from. Drill blank tolerances up to. S. 0000″ (-.

 

Drill Blanks - Sets Fractional - 116 - 12 x 64ths 29 pieces

Drill Blanks – Sets Fractional – 1/16 – 1/2″ x 64ths, 29 pieces

Drill Blanks – Sets Fractional – 1/16 – 1/2″ x 64ths, 29 pieces - 005mm) tolerance. 001 straight marked with size packaged in drill index meda brand tolerance +. 0002″ or +. S. When you need a set of custom cutting tools and you want to make them quickly and cost effectively, use vermont gage drill and reamer blank sets. Inch and metric blank in drill indexes (vermont gage only) indexes come with precision ground jobbers length blanks ready for the cutter grinder all h. Blanks are heat treated to 62/64 rc and marked with size. S. (-. 0002 or -. 0002″ vermont gage tolerance -. There is simply no easier, better, or quicker way to make quality cutting tools. Inch and metric diametric sizes high speed tool steel 62/64 rc jobber lengths 10 microinch finish or better within. 005mm). 0001 round within. 0000 / -.

 

Drill America DWD60J-DB-SET Qualtech 60 Piece High-Speed Steel Jobber Length Drill Blank Set in Metal Case Black Oxide Finish Round Shank Pack of 1

Drill America DWD60J-DB-SET Qualtech 60 Piece High-Speed Steel Jobber Length Drill Blank Set in Metal Case, Black Oxide Finish, Round Shank (Pack of 1)

Drill America DWD60J-DB-SET Qualtech 60 Piece High-Speed Steel Jobber Length Drill Blank Set in Metal Case, Black Oxide Finish, Round Shank (Pack of 1) - High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 60 piece drill blank set comes in a metal case. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. Round shanks allow use with a wide variety of toolholding systems.

 

73 024 X 1-18 HSS DRILL BLANK

#73 (.024) X 1-1/8″ HSS DRILL BLANK

#73 (.024) X 1-1/8″ HSS DRILL BLANK - Size (inch) 1/8 x 2-3/4. Shape round. High speed steel.

 

Drill Blank - Size 1 10000 OAL 6

Drill Blank – Size: 1″, (1.0000″), OAL 6″

Drill Blank – Size: 1″, (1.0000″), OAL 6″ - 008mm), from. Blanks have been used as shafts, arbors, guide rods, rollers, gages, alignment pins, punches, knockout pins, as well as for stock in the manufacturing of specialty tools and instruments. Meda blanks have been used for many purposes over the years. With tight dimensional tolerances, meda drill blanks are perfect for any project needing precise finished ground stock. 013mm). Meda h. 005mm), from. 5000″ (-. 6251″ to 1. S. 5001″ to. Precision ground, specifically made as blanks for precision drills. 0002″ or. 0003 or -. 0000″ (-. 0005″ or -. 6250″ (-. S. Drill blank tolerances up to.