Best 17 Bench Vises

 

Yost Vises 908-HV 8″ High-Visibility Heavy Duty Steel Bench Vise - Replaceable top jaws and built-in pipe jaws are grooved for enhanced grip. Yellow-painted cast steel body is highly visible for safety and has a flat portion that acts as a reinforced anvil and an additional work surface. Main screw that controls the jaws is covered by a bar to protect it from damage. Bench-mount vise with 8″ nominal top jaw width and 3/4″- to 2-1/4″-diameter pipe capacity provides clamping action for light-duty applications. 360-degree swivel base adjusts the direction of the jaws for proper placement and locks in place.

 

TEKTON 54006 6-Inch Swivel Bench Vise - Three mounting holes anchor vise securely to workbench. Polished steel anvil offers a smooth, consistent work surface for shaping metal pieces. Acme-threaded screw glides smoothly without binding. Cast iron construction (30,000 psi tensile strength) with replaceable serrated steel jaws holds work with a sure, nonslip grip. 120-degree swivel base with dual lock-down nuts positions workpiece where you need it.

 

Yost Vises 445 4.5″ Utility Combination Pipe and Bench Vise - Replaceable top jaws and permanent pipe jaws are grooved for enhanced grip. 360-degree swivel base adjusts the direction of the jaws for proper placement and locks in place. Vise has a cast iron body with steel u-channel bar for durability and has a flat portion that acts as an anvil and additional work surface. Rubber washers prevent the handle from unwanted sliding. Bench-mount vise with 45″ nominal jaw width and 0125″- to 2″-diameter pipe capacity provides clamping action for light-duty applications.

 

Yost Vises 65C 6.5″ Tradesman Series Industrial Grade Bench Vise Made in USA - 360-degree swivel base adjusts the direction of the jaws for proper placement and locks in place. Bench-mount vise with swivel base, 65″ nominal top jaw width, and 0125″- to 35″-diameter pipe capacity provides clamping action for medium-duty applications. Pipe jaws adjust horizontally and vertically, are set back to prevent interference with top jaw use, and can be replaced when worn. Ductile iron body provides strength for extended life, and acts as an anvil and an additional work surface. Top jaws are reversible and have a grooved surface on one side for enhanced grip, and a smooth side on the other for handling delicate items.

 

Fangfang Mini Table Bench Vise 3.5 Inch - Ideal for holding small parts in jewelry, hobby, model making, electronics, home and work-bench many more applications. Vise is durable, light weight，and it a very portable tool. Mini vise body is made of cast aluminum, a handy miniature vise, ideal for holding small parts in jewelry, hobby, model making, electronics, home and work-bench many more applications vise is durable, light weight，and it a very portable tool. Clamps onto a surface up to 35mm thick, jaw width 36mm. Made with durable, strong & lightweight aluminum with rubberized jaw sole.

 

World Pride Mechanic Bench Vise Table Top Clamp Press Locking Swivel Base Heavy Duty New - No striking on the body of the vise or smooth surface. While strong work, strength should be towards the fixed bench vice. 3″ x 7″(l x w x h) base length 7. The surface of screws and nuts should be cleaned, lubricated to resist rust. 3. 4. 94 lb 3 mounting holes please note 1. 1″ g. 26. 7″ jaw width 6″ opening 9. W. 8″ x 6. Description small size table top vise, removable size 13. 2″ vice travel 13″ side 6. 2. 5″, diameter 5. Clamp the work piece properly, and tighten the handle only with hand instead of any other tools.

 

Grizzly G7062 Multi-Purpose 5-Inch Bench Vise - This multi-purpose bench vise does it all jaw rotate 360 degrees for unlimited work piece positioning and holds flat stock as well as round stock with. Base swivels for greater versatility and there-inch even an anvil face to top it all off. Jaw rotate 360 degrees for unlimited work piece positioning and holds flat stock as well as round stock with the built-in pip jaws.

 

Capri Tools 10519 Rotating Base and Head Bench Vise, 6″ - Head rotates 360 degrees and can be locked in w/pull-pin at 12 points, each within 30 degrees. Base rotates 360 degrees and makes it easy to place and lock jaws where needed. Includes a 10 year warranty. Made of heavy-duty ductile iron (60,000 psi) and boasts 9,000 lbs of clamping force. Contains 6″ wide jaws, 57″ jaw opening, and 42″ throat depth.

 

Performance Tool W54025 Portable Multipurpose Workbench and Vise (200 lbs Capacity) - 200 lb safe working load. Tabletop printed with grid, ruler and protractor for added convenience. Jaws resist warping and can be angled to accommodate uniquely-shaped materials. Folding design for compact storage. One-handed clamp system allows for independent jaw adjustment. Overall size 23 7/8-inch x 25-inch x 31-inch.

 

World Pride 5″ Bench Vise with Anvil Swivel Locking Base Table top Clamp Heavy Duty Steel - No striking on the body of the vise or smooth surface. 17. W. 3. 63 lb3 mounting holesplease note1. While strong work, strength should be towards the fixed bench vice. Clamp the work piece properly, and tighten the handle only use hand instead of any other tools. 4. The surface of screws and nuts should be cleaned, lubricated to resist rust. Descriptionheavy duty 5″ bench vicesimply and easy to operatemade of durable cast iron for great strength and gripswivel locking base, turn any direction as you need after mountingstable and firm after mountingsmall size table top vise, removablepractical use for home and businessspecificationssize (11″ x 5″ x 6″) (l x w x h)jaw width 5″g. Package included1 x bench vice. 2.

 

Yost RIA-4 4″ Compact Bench Vise with 360-Degree Swivel Base - Compact bench-mount vise provides clamping action for light-duty applications. Class 30 cast gray-iron body is durable and strong for extended life. Fully enclosed screw assembly protects the vise against dust and debris. Replaceable jaws are grooved for enhanced grip. 360-degree swivel base adjusts the direction of the jaws for proper placement and locks in place.

 

Capri Tools 10515 Ultimate Grip Forged Steel Bench Vise, 4″ - Contains 4 inches wide jaws, 5 inches jaw opening, and 29 inches throat depth. Includes a lifetime warranty. Made of 90,000 psi tensile strength drop forged steel. Comes with 360 degree swivel base, large anvil, and corrosion resistant black oxide handle. Exerts 5,500 lbs of clamping force and comes with replaceable machinist and pipe jaws.

 

HFS (TM) 4″ Heavy Duty Bench Vise – 360 Swivel Base with Lock, Big Size Anvil Top, 12lbs - Double locking swivel base. Incredible clamping power. Durable cast steel construction. Replaceable, hardened, forged steel jaws. Power serrated steel jaws and clamps for great grip and strength.

 

Jinwen 122520 3-Inch Drill Press Bench Vise. - 3-inch clamping capacity. 1-inch throat depth. 4-inch jaw width. This is a high quality vise it can be used on any table, work bench, and any thing it can be clamped to.

 

Goplus® 8″ Mechanic Bench Vise w/Anvil (Swivel) Table Top Clamp Press Swivel Base Heavy Duty - Don’t hesitate to buy one now. It is ideal for providing maximum clamping and holding power. This 8-inch bench vise is constructed with heavy duty precision-machined anvil to deliver incredible strength for gripping all kinds of objects. Whether you are working with wood or metal, the instant acton vise screw opens and closely quickly, and the bench vise base swivels 360 degrees to give you the best work angle.

 

Yost BV-4 Bench Vise, 4″, Blue - The anvil is machined to provide a smooth work surface. A staple for any home workshop, no matter what your job is. A large anvil on the back of the vise is perfect for forming and shaping metal pieces. The 120 degree swivel base allows this vise to be positioned in to clamp parts with ease. The yost bv-4 4″ bench vise is an all-purpose bench vise. The dual lockdowns on the vise are designed to keep the vise in place once in position. Built for durability and dependability, this vise is constructed from 30,000 psi cast iron. The acme threaded main screw provides smooth operation. The replaceable serrated jaws will prevent objects from moving around once you have clamped them in place.

 

SE VJP42RP 2Pc 4″ Bench Vise Jaw Inserts with Embedded Magnets, - Our vise jaw pads inserts are ideal for gunsmiths, gripping objects, and anytime you need to clamp metal without marring. Se is committed to providing the customer with the best possible source for value. Tpu resists oil, grease and abrasion. Made from high-quality thermoplastic polyurethane (tpu), our inserts are hard enough to hold items in place but soft enough to protect finished, anodized or delicate surfaces from scratching, damage or marring. Genuine se products come with our se logo on the packaging. 2 pc bench vise jaw pads have multiple uses for holding or gripping objects without marring waffle grip with anti-slip textured faces adds more grip points product includes one set of pads (2 pads) 4x magnets 3/8″ diameter magnets add stability fits most vises tpu pads protect from marring your piece color orange length 4″ warning using hand tools can be dangerous, always take care and keep away from children. Important avoid getting counterfeit items. Se is a registered trademark protected by us trademark law. Select correct type and size of hand tools for work. Se 4″ bench vise jaw pads are designed to avoid marring the surface of the item you are holding or gripping. Wear protective eye wear in work area at all times. You will enjoy the quality, function and usefulness our 2pc 4″ bench vise jaw inserts with embedded magnets has to offer.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.