Grizzly H7605 4 Jaw Chuck, 3-Inch
- This self-centering style 4-jaw chuck has reversible stepped jaws for holding a variety of round or square work piece sizes. Two 4-inch wrenches are included for final tightening. Fits all wood lathes with 1-inch x 8 tpi spindles. Setup is quick and easy by twisting the knurled adjustment plate on the back of the chuck.
3/4″ x 16 TPI Self-Centering 4-Jaw Chuck
- The chuck body is chrome plated and the jaws are black anodized to protect against corrosion. To adjust the quick action on the chuck simply insert the locking levers into the chuck and rotate them in opposite direction to grip in the contraction mode or expansion mode. The powerful jaws will grip and expand in a 2″ to 3″ dovetail recess in the base of your project. The savannah self-centering 4 jaw woodturning chuck has a large range of jaw adjustability. The chuck comes with a screw chuck that does not require any accessories or disassembly to use.
Multifunction 4 Jaw chuck Mini lathe Wooden bead machine Woodworking lathe 220V
- Small size, easy to carry, structural optimization, high quality stainless steel with 15mm thickness and strength greatly enhanced. Side of the motor has two heads, an installation tool to make beads, one can in turn be used to install the chuck polished beads. The electronic variable speed function, with power indicator easier to operate and control, low noise aluminum belt drive. Dual speed motors, two-switch can be perforated polished honed polished wood beads carved-in-one. 4 jaw chuck can clamp square and round wood.
Sherline 1044 – 2.5″ 4-Jaw Chuck 3/4 – 16 Thread
- Four-jaw chucks have four advantages over three-jaw chucks. (4) they can clamp stock tighter. (1) they can be used to hold irregularly shaped parts. A hex key (provided) is used to tighten each jaw individually. (3) four-jaw chucks can be used to deliberately hold a part off-center. A groove is provided around the base of the chuck so that angle clamps can be used to mount it to the table of a mill as a holding fixture. (2) with the use of a dial indicator, they can be used to center parts with a great deal of accuracy. This is a valuable asset when machining cams, crankshafts, and similar parts. Tommy bars (also provided) are used in the holes in the side to tighten and loosen the chuck for more leverage. The main disadvantage of the 4-jaw independent chuck is that the jaws must be individually set, adding considerable time to setups.
Steelex D3612 8-Inch 4-Jaw Chuck
- Precision ground components. Inside jaw minimum/maximum jaw openings are 394 to 3937 inches. Outside jaw minimum/maximum openings are 2480 to 7874 inches. 8 inch 4-jaw plain back reversible jaws.
4 Way Woodturning Chuck Complete System with #3 and Pin Jaws ((1) 3/4″ x 16 tpi adapter size)
- Includes 4 jaw chuck, standard jaws, t-handle wrench, screw center, threaded adapter (choice of size for your lathe), 2 each locking levers, 8 each jaw mounting screws, #3 chuck jaws (for stock 3-1/4″ to 4-1/4″) and pin jaws ( for stock from 3/8″ to 1-3/8″). The supplied standard jaws hold round stock between 1-5/8″ to 2-3/4″ or square billets 1-1/8″ to 2-1/8″ in size. The jaws expand and grip in a 2″ to 3″ dovetail recess. It has a wide range of jaw movement and a powerful grip for most any type of turing project. . The 4 jaw chuck is an economical and quality choice for woodturners of any skill level. The 4 way chuck is chrome plated to protect against corrosion while jaws are anodized black.
Bolton Tools 4 Jaw Chuck 5-Inch with Mounting Plate for BT210V
- 4 jaw hollow chuck. Holds 5″ diameter raw material. Hollow chuck feature allows use of spindle bore.
Grizzly H7820 4 Jaw Chuck 1-1/2-Inch by 8 TPI
- This 4-jaw, self-centering chuck with dovetailed jaws is great for small bowl and plate turning and features jaws that grip by clamping around the workpiece or expanding to fit a turned recess. Includes t-handled wrenches, wood screw point and machined chuck lever. The minimum diameter required for clamping around the workpiece is 1-1/4″ and the minimum diameter required for expansion is 1-13/16″. Specifications type 3-3/4″ 4-jaw self centering size 1-1/2″ tpi 8. Works great with optional h6268 and h6269 jaws, which are available for additional clamping options. . Compact design is ideal for smaller lathes.
Grizzly T10053 3-1/4-Inch 4-Jaw Chuck for 4-Inch Rotary Table
- Coolant trough. Sector arms. . 3 dividing plates. Indexing pin/handle. 4- 5/16″ t-slots. 172 ratio or 5degree per revolution. Mt #1 spindle bore. Vernier scale reads to 10 seconds. Horizontal or vertical use. 10mm locating keys.
Hurricane Turning Tools HTC100 4-Inch Woodturning 4 Jaw Chuck Kit with Dovetail Jaws for Wood Lathes with 1 1/4 x 8-Inch TPI Spindles
- This is a 4″ chuck which compares in size to the oneway talon, novatech, etc chucks. If you are looking for a massive chuck for medium to super large bowls, check out the htc125 5″ chuck in our amazon store. Available in several spindle threads to suit almost all lathes. It provides a superb grip on your woodturning projects such as bowls and platters. We would like to introduce you to the hurricane htc100 100mm 4 jaw self centering woodturning chuck. It is a great size for full-size / midi and mini lathes. Please note that this chuck is the smaller in size of the two hurricane chucks. Many optional jaw sets are available (sold separately) for various woodturning applications. This is an outstanding quality chuck that compares to some of the “famous names” on the market. It is perfect if you only want one chuck and you switch between a mini lathe and a full size lathe.
Proxxon 24030 Four Jaw Chuck
- This feature allows clamping unsymmetrical pieces such as ovals, squares or other odd-shaped work pieces. The jaws are reversible and hardened, giving a capacity of 3 5/32″ (80 mm). Model # 24030 features four jaws are adjusted independently and allows for clamping unsymmetrical pieces such as ovals, squares and other odd shapes proxxon precision german engineering for solving intricate turning and milling tasks. The work piece must be centered manually. Accessories for lathe-system pd 230/e and milling systems pf 230 and ff 230. All accessories meet the high german quality standards four jaw chuck the 4 jaws are adjusted independently.
PSI CMG3C Mini Grip 4 Jaw Wood Lathe Chuck System
- Bonus jaws to hold dowels 1-1/2-to-2-3/8-inch to grip internally 2-to-3-inch. Basic straight jaws for 1-inch stock, square or round. Adapts to both 3/4-inch-by-16 tpi and 1-by-8 tpi spindles, and contains 2 open/close levers. Flat jaws to handle bowls up to 5-inch diameter are available (#cjawfj1). Stepped jaws for small dowels 3/8-to-1-1/4-inch to grip internally 1-to-2-1/2-inch.
Lathe Chuck, 4-Jaw 3″
- This set includes the 3 inch 4-jaw chuck, a chuck key, and reversible jaws. 15″ (80 mm) in diameter. This chuck has a 0. It holds work up to 3. 87″ (22 mm) through hole.
Woodstock D4054 3-Inch 4 Jaw Chuck 1-Inch by 8 TPI
- Fits all wood lathes with 1-inch by 8 tpi spindles. Self-centering. Two 4-inch wrenches are included for final tightening.
3/4 x 16 TPI Self-Centering 4-Jaw Chuck
- You’ll appreciate the following features wide range of jaw movement, quick action and a powerful grip in either expansion or contraction modes. No disassembly or accessories are required to use the accompanying screw chuck, which has a 1-1/8″ long right hand thread. Comes complete with screw center, locking levers, t-handled hex wrench for jaw screws and 8 extra jaw screws. Everything is secure in a fitted plastic storage/carrying case. Expand the versatility of your lathe and mount your workpieces quicker and easier with the self-centering 4-jaw chuck. Simply rotate the chuck’s outer ring in the opposite direction to firmly hold round stock between 1-5/8″ and 2-3/4″ or square billets 1-1/8″ to 2-1/8″ in size. Jaws will expand and grip in a 2-3″ dovetailed recess in the base of your turning. Chuck body is chrome-plated to protect against corrosion while the jaws are anodized black.
1″ x 8 TPI Self-Centering 4-Jaw Chuck
- . Chuck body is chrome-plated to protect against corrosion while the jaws are anodized black. Simply rotate the chuck’s outer ring in the opposite direction to firmly hold round stock between 1-5/8″ and 2-3/4″ or square billets 1-1/8″ to 2-1/8″ in size. Everything is secure in a fitted plastic storage/carrying case. You’ll appreciate the following features wide range of jaw movement, quick action and a powerful grip in either expansion or contraction modes. Jaws will expand and grip in a 2-3″ dovetailed recess in the base of your turning. Comes complete with screw center, locking levers, t-handled hex wrench for jaw screws and 8 extra jaw screws. Expand the versatility of your lathe and mount your workpieces quicker and easier with the self-centering 4-jaw chuck. No disassembly or accessories are required to use the accompanying screw chuck, which has a 1-1/8″ long right hand thread.
Lathe Chuck, 4-Jaw 4″
- This chuck has a 0. 94″ (100 mm) in diameter. It includes a chuck key. This 4 inch 4-jaw chuck requires an adapter for the mini lathe, but it fits the standard backplate for 9×20 lathes (with the addition of three more bolt holes). The chuck can hold work up to 3. 98″ (25 mm) through hole.
New 4″ Inches(100mm) Quality Rotary Table +70 mm 4 Jaw Chuck+ Back Plate+ Fixings
- Description of the chuck a high quality 4 jaw independent chuck, the body of which is made from sg iron & jaws are of tool steel hardened & ground. Same jaws are reversible as well. Can be mounted both in horizontal & vertical position. The back plate has been drilled in a manner that it will fit to a 3 slot or a 4 slot rotary table. Supplied with a mounting back plate & fixing tee nuts with screws. The chuck mounting is standard unimat thread m14 x 1. Table diameter 100 mm table is graduated 360 degrees. Worm gear ratio -136, which means that the 1 handle rotation shall turn the table by 10 degrees. Center height in vertical position 2-1/16″ (50 mm approx) hand wheel is graduated in divisions of 10 min & can be set to zero. Description description of 4″ (100 mm) rotary table designed for smaller milling machines.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
