Best 19 Ball End Mills

 

EnPointâ„¢ TiAlN Coating Aluminum Stainless Steel Cutting 2-Flute Ballnose End Mill 532 4mm Shank 05mm Cutter Dia 2mm Flute Length Round Bottom CNC Milling Spiral Router Bits for Cast Iron Carbon Steel Tool Steel

EnPointâ„¢ TiAlN Coating Aluminum Stainless Steel Cutting 2-Flute Ballnose End Mill 5/32″ 4mm Shank 0.5mm Cutter Dia 2mm Flute Length Round Bottom CNC Milling Spiral Router Bits for Cast Iron Carbon Steel Tool Steel

EnPointâ„¢ TiAlN Coating Aluminum Stainless Steel Cutting 2-Flute Ballnose End Mill 5/32″ 4mm Shank 0.5mm Cutter Dia 2mm Flute Length Round Bottom CNC Milling Spiral Router Bits for Cast Iron Carbon Steel Tool Steel - Produced from ultra-fine submicron nano grade solid carbide for maximum tool strength and durablity. 2 flutes allows higher feedrates and provides great chip clearance to prevent chips from sticking. It is mainly suitable for milling materials from soft plastics to tough aerospace alloys including aluminum, cast iton, carbon steel, tool steel, stainless steel, mold and alloy steels. With tialn coating increases cutting speed and tool life as well as improving the surface finish. Ballnose for producing round bottomed grooves in hardwood and softwood, plywood & composites.

 

American Carbide 131844 516 Single End 2 Flute Ball Nose End Mill Uncoated

American Carbide 131844 5/16 Single End 2 Flute Ball Nose End Mill Uncoated

American Carbide 131844 5/16 Single End 2 Flute Ball Nose End Mill Uncoated - 5/16″ shank diameter. 13/16″ length of cut. 5/16″ cutter diameter. 2 flute. 2-1/2″ overall length.

 

Kodiak Cutting Tools KCT133263 USA Made  Ball Nose Premium Carbide End Mill AlTiN Coated 4 Flute 18 Shank 12 Length of Cut 1-12 Overall Length 18 Diameter

Kodiak Cutting Tools KCT133263 USA Made Ball Nose Premium Carbide End Mill, AlTiN Coated, 4 Flute, 1/8″ Shank, 1/2″ Length of Cut, 1-1/2″ Overall Length, 1/8″ Diameter

Kodiak Cutting Tools KCT133263 USA Made Ball Nose Premium Carbide End Mill, AlTiN Coated, 4 Flute, 1/8″ Shank, 1/2″ Length of Cut, 1-1/2″ Overall Length, 1/8″ Diameter - 0001″/-. It is exceptional in difficult to machine materials where adhesive wear is particularly high. This coating is extremely heat resistant and can be used with or without coolant. 000″/-. 002″shank diameter tolerance -. 1/8 inch diameter solid carbide end mill, coated 1/8″ shank 1/2″ length of cut 1-1/2″ overall length 4 flute carbide, altin coated diameter tolerance +. 0004″altin is a high performance coating for milling, tapping and drilling in stainless steels, carbon steels, alloy steels, titanium and cast iron. .

 

Kodiak Cutting Tools O8-G61J-HPXK USA Made Ball Nose Premium Carbide End Mill AlTiN Coated 4 Flute 38 Diameter 38 Shank 1 Length of Cut 2-12 Overall Length

Kodiak Cutting Tools O8-G61J-HPXK USA Made Ball Nose Premium Carbide End Mill, AlTiN Coated, 4 Flute, 3/8″ Diameter, 3/8″ Shank, 1″ Length of Cut, 2-1/2″ Overall Length

Kodiak Cutting Tools O8-G61J-HPXK USA Made Ball Nose Premium Carbide End Mill, AlTiN Coated, 4 Flute, 3/8″ Diameter, 3/8″ Shank, 1″ Length of Cut, 2-1/2″ Overall Length - 0001″/-. 0004″altin is a high performance coating for milling, tapping and drilling in stainless steels, carbon steels, alloy steels, titanium and cast iron. It is exceptional in difficult to machine materials where adhesive wear is particularly high. 002″shank diameter tolerance -. . 3/8″ shank 1″ length of cut 2-1/2″ overall length 4 flute carbide, altin coated diameter tolerance +. This coating is extremely heat resistant and can be used with or without coolant. 000″/-.

 

5pcs P57-12680mm 3D Diamond Bits Cutter Tapered Ball End Mill  V Ball End Milling Diamond Tools for Points Sintered Diamond Bits

5pcs P57-12680mm 3D Diamond Bits Cutter Tapered Ball End Mill , V Ball End Milling Diamond Tools for Points Sintered Diamond Bits

5pcs P57-12680mm 3D Diamond Bits Cutter Tapered Ball End Mill , V Ball End Milling Diamond Tools for Points Sintered Diamond Bits - P57-12680mm 3d diamond bits cutter tapered ball end mill , v ball end milling diamond tools for points sintered diamond bits description technology professional smelting & fusing material type diamond head tapered ball nose bit shank diameter 12mm tool-tip /cutting edge diameter 6mm cutting length80mm overall length 150mm working materials stone materials, such as stone, marble, granite, ceramic tiles, sandstone, bluestone, tombstone, gravestone, bricks, quartz, etc suitable for 3d series with degree 3d embossment, letter engraving, carving, milling, polishing, etc ball-nose series relief sculpture, ball-nosed lettering, milling, engraving, etc flat-bottom series slotting, cutting, flat lettering, end milling, carving, etc.

 

EnPointâ„¢ Solid Carbide 2 Flutes Ballnose End Mill 18 3175mm Shank 18 Cutter Dia 17mm Flute Length CNC Center Cutting Spiral Ball Nose Milling Bit for Hardwood Acrylic PVC Plastic Cameos

EnPointâ„¢ Solid Carbide 2 Flutes Ballnose End Mill 1/8″ 3.175mm Shank 1/8″ Cutter Dia 17mm Flute Length CNC Center Cutting Spiral Ball Nose Milling Bit for Hardwood Acrylic PVC Plastic Cameos

EnPointâ„¢ Solid Carbide 2 Flutes Ballnose End Mill 1/8″ 3.175mm Shank 1/8″ Cutter Dia 17mm Flute Length CNC Center Cutting Spiral Ball Nose Milling Bit for Hardwood Acrylic PVC Plastic Cameos - Tungsten carbide provides high hardness, resistant to high temperature and corrosion for longer life. Ballnose suitable for working on large-scale relif cameos and curved surfaces. Extremely sharp cutting edge produces an excellent surface finish less build-up heat. Designed with large helical chip clearance groove to prevent chips sticking or packing in the flutes. 2 flutes allow higher feedrates than single flute end mills cnc qualified, center cutting.

 

End Mill Set 6 Piece 4 Flute Ball HSS

End Mill Set, 6 Piece 4 Flute Ball, HSS

End Mill Set, 6 Piece 4 Flute Ball, HSS - Center cutting end mills. 6 piece hss end mill set. 1/8″ through 3/8″ end mills have 3/8″ shank, 1/2″ end mills have 1/2″ shank. Includes 1/8″ 3/16″ 1/4″ 5/16″ 3/8″ 1/2″ end mills. 4 flute ball (round end) end mills.

 

EM-R10 516 2 Flute Single End Ball End Mill- 38 Shank High Speed Steel

EM-R10 5/16″ 2 Flute Single End Ball End Mill- 3/8″ Shank, High Speed Steel

EM-R10 5/16″ 2 Flute Single End Ball End Mill- 3/8″ Shank, High Speed Steel - Flute length 3/4″. High speed steel. Cutting diameter 5/16″. Overall length 2 1/2″. Shank diameter 3/8″.

 

1 PC YG1 4 FLUTE 516 BALL END MILL SOLID CARBIDE X 1316 LOC X 2-12 CNC BIT

1 PC YG1 4 FLUTE 5/16 BALL END MILL SOLID CARBIDE X 13/16 LOC X 2-1/2″ CNC BIT

1 PC YG1 4 FLUTE 5/16 BALL END MILL SOLID CARBIDE X 13/16 LOC X 2-1/2″ CNC BIT - Precision ground using the highest quality grinding wheels. 4 flutes, ball nose, single end 30° rh spiral. Our part # yg1-e5250020. High precision solid carbide end mill(s) made from the largest end mill manufacturer in the world. 5/16″ cutting diameter x 5/16″ shank diameter x 13/16″ length of cut x 2-1/2″ overall length.

 

EM-R12 38 2 Flute Single End Ball End Mill- 38 Shank High Speed Steel

EM-R12 3/8″ 2 Flute Single End Ball End Mill- 3/8″ Shank, High Speed Steel

EM-R12 3/8″ 2 Flute Single End Ball End Mill- 3/8″ Shank, High Speed Steel - High speed steel. Overall length 2 1/2″. Cutting diameter 3/8″. Shank diameter 3/8″. Flute length 3/4″.

 

Kodiak Cutting Tools KCT133219 USA Made  Solid Premium Carbide Ball Nose End Mill AlTiN Coated 4 Flute 18 Shank 14 Length of Cut 1-12 Overall Length 116

Kodiak Cutting Tools KCT133219 USA Made Solid Premium Carbide Ball Nose End Mill, AlTiN Coated, 4 Flute, 1/8″ Shank, 1/4″ Length of Cut, 1-1/2″ Overall Length, 1/16″

Kodiak Cutting Tools KCT133219 USA Made Solid Premium Carbide Ball Nose End Mill, AlTiN Coated, 4 Flute, 1/8″ Shank, 1/4″ Length of Cut, 1-1/2″ Overall Length, 1/16″ - This coating is extremely heat resistant and can be used with or without coolant. 0004″altin is a high performance coating for milling, tapping and drilling in stainless steels, carbon steels, alloy steels, titanium and cast iron. 0001″/-. 1/16 inch diameter solid carbide end mill, coated 1/8″ shank 1/4″ length of cut 1-1/2″ overall length 4 flute carbide, altin coated diameter tolerance +. 000″/-. 002″shank diameter tolerance -. It is exceptional in difficult to machine materials where adhesive wear is particularly high.

 

HHIP 5841-0875 78 x 78 2 Flute High Speed Steel Single End Ball End Mill

HHIP 5841-0875 7/8 x 7/8″ 2 Flute High Speed Steel Single End Ball End Mill

HHIP 5841-0875 7/8 x 7/8″ 2 Flute High Speed Steel Single End Ball End Mill - ~ overall length is 4-1/4. ~ Shank diameter is 7/8. 7/8 x 7/8″ 2 flute high speed steel single end ball end mill ~ diameter of the mill is 7/8. ~ Flute length is 2.

 

Kodiak Cutting Tools KCT133032 USA Made Solid Carbide Ball Nose End Mill 4 Flute 38 Shank 1 Length of Cut 2-12 Overall Length 38 Diameter

Kodiak Cutting Tools KCT133032 USA Made Solid Carbide Ball Nose End Mill, 4 Flute, 3/8″ Shank, 1″ Length of Cut, 2-1/2″ Overall Length, 3/8″ Diameter

Kodiak Cutting Tools KCT133032 USA Made Solid Carbide Ball Nose End Mill, 4 Flute, 3/8″ Shank, 1″ Length of Cut, 2-1/2″ Overall Length, 3/8″ Diameter - 0001″/-. 000″/-. 3/8 inch diameter ball nose solid carbide end mill, single end 3/8″ shank 1″ length of cut 2-1/2″ overall length 4 flute carbide, single end diameter tolerance +. . 002″shank diameter tolerance -. 0004″.

 

HHIP 5842-0187 316 x 38 2 Flute M42 Cobalt Single End Ball End Mill

HHIP 5842-0187 3/16″ x 3/8″ 2 Flute M42 Cobalt Single End Ball End Mill

HHIP 5842-0187 3/16″ x 3/8″ 2 Flute M42 Cobalt Single End Ball End Mill - ~ flute length is 1/2. 3/16 x 3/8″ 2 flute m42 cobalt single end ball end mill ~ m42 (8%) cobalt ~ diameter of the mill is 3/16. ~ Shank diameter is 3/8. . ~ Overall length is 2-5/16.

 

14 X 14 X 34 X 2-12 4 FLUTE LEFT HAND CARBIDE BALL END MILL

1/4 X 1/4 X 3/4 X 2-1/2 4 FLUTE LEFT HAND CARBIDE BALL END MILL

1/4 X 1/4 X 3/4 X 2-1/2 4 FLUTE LEFT HAND CARBIDE BALL END MILL - 2-1/2″ overall length. 2 flute. 5/16″ shank diameter. 5/16″ cutter diameter. 13/16″ length of cut.

 

Drill America DWCT15B HSS 2 Flute Double End Ball End Mill 532 x 316

Drill America DWCT15B HSS 2 Flute Double End Ball End Mill, 5/32″ x 3/16″

Drill America DWCT15B HSS 2 Flute Double End Ball End Mill, 5/32″ x 3/16″ - Bright finish. High speed steel. Double end mill.

 

EM-R4 18 2 Flute Single End Ball End Mill- 38 Shank High Speed Steel

EM-R4 1/8″ 2 Flute Single End Ball End Mill- 3/8″ Shank, High Speed Steel

EM-R4 1/8″ 2 Flute Single End Ball End Mill- 3/8″ Shank, High Speed Steel - Flute length 3/8″. Shank diameter 3/8″. High speed steel. Overall length 2 5/16″. Cutting diameter 1/8″.

 

10M X 10M X 16M LOC 2  OAL 4 FL CARBIDE BALL END MILL

10M X 10M X 16M LOC 2 ” OAL 4 FL CARBIDE BALL END MILL

10M X 10M X 16M LOC 2 ” OAL 4 FL CARBIDE BALL END MILL - Large single flute for maximum chip clearance space for chip evacuation center cutting for straight plunging or ramping down into the workpiece. With a unique mirror grinding processing for cutting edge produces an excellent surface finish. It is mainly used for the engraving and cutting of aluminum, acrylic, medium density fiberboard, corlor plates and pvc etc. The spiral cutting egde provides sharp cutting and improves work efficiency. Produced from a premium ultra fine submicron grade solid carbide for great tool strength, durability.

 

Richards Micro Tool 887XB-F5R10-031 Long Ball End Mill 3 Flute Carbide 0031 Diameter 250 Over All Length 0155 Flute Length 0300 Reach Length

Richards Micro Tool 887XB-F5R10-.031 Long Ball End Mill, 3 Flute, Carbide, 0.031″ Diameter, 2.50″ Over All Length, 0.155″ Flute Length, 0.300″ Reach Length

Richards Micro Tool 887XB-F5R10-.031 Long Ball End Mill, 3 Flute, Carbide, 0.031″ Diameter, 2.50″ Over All Length, 0.155″ Flute Length, 0.300″ Reach Length - Reach length 0300[10x]. Number of flutes 3. Flute length 0155[5x]. Over all length 250 with helix angle 30deg. 0031 diameter and 0125 shank diameter.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.