Best 19 Starretts

 

Starrett SB565Z Brass Drive Pin Punches Set, 8 Pieces - The set is in a fabric case, and includes pin punches with the following diameters 1/16″, 3/32″, 1/8″, 5/32″, 3/16″, 7/32″, 1/4″, and 5/16″. The l. They have a cylindrical body to hold and drive the smaller diameter, flat-ended tip into the workpiece. S. Starrett company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in athol, ma. The starrett sb565z is an eight-piece brass drive pin punch set to drive pins into or out of a work piece. Pin punches are used to place or knock out loosened pins and rivets from workpieces, where they are frequently used to attach something to a rotating shaft. Each pin punch is made from brass, for use with surfaces that could be damaged by harder steel punches.

 

Starrett 135A Pocket Level With Satin Nickel-Plated Finish, 2-1/2″ Size - Glass vial resists scratching to provide clear readings. Body is hexagonal brass with a satin nickel-plated finish that resists corrosion. 2-1/2″ pocket spirit level for determining horizontal plane. Compact size and smooth, convex ends for fitting in a pocket. Vial sensitivity is 17 to 21 minutes.

 

Starrett 3202-6 Dial Caliper, Hardened Stainless Steel, 0-6″ Range, 0.001″ Graduation, White - The dial caliper is the most versatile precision hand tool on the market and has been the first choice of metal working professionals for decades. This series features 0-6″ range and 0. The starrett dial calipers provide quick, accurate measurements of outside dimensions, inside dimensions and depth. . 001″ graduation in fitted case.

 

Starrett Measure Stix SM412WRL Steel White Measure Tape with Adhesive Backing, English Graduation Style, Right To Left Reading, 12′ Length, 0.5″ Width, 0.0625″ Graduation Interval - Manufactured of high quality precision steel for extended service use. Reads left to right or right to left. Produced with permanent adhesive back that sticks to almost any work surface for convenient, at-a-glance measurements. Easily cut to size with scissors. Mounts on work benches, saw tables, drafting tables, etc.

 

Starrett S565PC Drive Pin Punch Set (8 Pieces) - Cylindrical body is knurled for grip. Eight-piece steel drive pin punch set for driving pins into or out of a workpiece. Made of hardened, tempered steel for strength. Protective vinyl case for storage and organization. Includes pin punches with diameters 1/16″, 3/32″, 1/8″, 5/32″, 3/16″, 7/32″, 1/4″, and 5/16″.

 

Starrett Measure Stix SM412ME Steel White Measure Tape with Adhesive Backing, English/Metric Graduation Style, Left To Right Reading, 12′ (3.65m) Length, 0.5″ (13mm) Width, 0.0625″ Graduation Interval - Manufactured of high quality precision steel for extended service use. Produced with permanent adhesive back that sticks to almost any work surface for convenient, at-a-glance measurements. Reads left to right or right to left. Mounts on work benches, saw tables, drafting tables, etc. Easily cut to size with scissors.

 

Starrett 264E Center Punch With Square Shank, 4-1/4″ Length, 5/32″ Tapered Point Diameter, 3/8″ Square Thickness - Shank is tempered steel for strength. Point is hardened steel for wear resistance. Center punch with 4-1/4″ length and 5/32″ diameter tapered point makes a starter dimple to guide a drill bit. Square shank will not roll when set down and is knurled for grip.

 

Starrett C11H-12-4R 12 Combination Square with Head and 12″ Satin Chrome Blade - 12”, 4r grad, satin chrome blade. Graduation type 4r, graduations 8ths, 16ths, quick reading 32nds, 64ths, head finish black wrinkle, head material cast iron, head type square head only, base length 4-9/16″, number of pieces 2. Starrett c11h-12-4r 12 combination square with square head and 12” satin chrome blade the starrett 12″ combination square with square head includes a reversible lock bolt, scriber, spirit level, and hardened steel, photo-engraved blade with satin chrome finish. The combination square includes a cast iron head with black wrinkle finish. .

 

Starrett C33H-12-4R 12-Inch Combination Square with Square Head Only - Features easy-to-read, sharp 8ths, 16ths, 32nds, and 64ths graduations. A multi-purpose tool that can be used for applications that require a 45-degree miter, a depth gage, a level, a plumb, and a precision rule. Square blade easy-to-read, sharp graduation. Protractor heads have revolving turrets with direct-reading double graduations, 0-180-degrees in opposite directions, for the direct reading of angles and supplementary angles. The square head are forged hardened steel with smooth black enamel finish. With reversible lock bolt, scriber, spirit level. Bearing surface is accurately ground. Graduation no 4r, 1/8″, 1/16″, quick reading 1/32″, 1/64″. Square blades are machine divided, hardened and tempered for long life. A reversible lock bold allows the blade to be turned over or end-for-end, without removing the lock bold or nut to ensure true alignment of the blade and heads.

 

Starrett 505A-12 12″ – 300mm Aluminium Miter Protractor - Saves time and reduces waste. 7-inch version also. Ideal for carpenters, plumbers and all building trades. 12-inches long 1-1/2 pounds 1-year warranty. Scale shows angle for a miter joint and single cut. Durable 1/4-inch thick aluminum alloy teflon o-ring for smooth, precise operation. Upside down or backwards, the reading is always correct. Takes error-prone calculations out of miter cuts. 12-inch miter saw protractor with two scales–red “miter cut” scale and black “single cut” scale. Allows direct transfer of the work angle to the miter saw in 3 steps with no calculations.

 

Starrett 98-6 6-Inch Precision Machinists Level - Cast iron base for increased durability. Involute groove along the base provides reliable seating when leveling round items. Cross test vial allows simultaneous leveling in both directions. Precision machinists’ level with a graduation of 042 mm/m, or 80-90 seconds. Ground and gradated main vial. Ground glass main vial is graduated, and adjustable to a positive setting, for accurate results. Made from high-quality seasoned cast iron. Accurate and reliable machinist’s level. Cross-test vial enables simultaneous leveling in two directions for precise measurements. 1-year manufacturer’s warranty.

 

Starrett EC799A-6/150 Electronic Caliper, Stainless Steel, 0.0005″ Resolution and 0″-6″ Measuring Range, Black - The ec799 offers a slim, streamlined profile, a large, clear, easy-to-read lcd display, long battery life, and function buttons for zero and inch/mm. The starrett ec799 series electronic caliper is light, comfortable, easy-to-use, and constructed with features that have made starrett slide calipers the machinist’s first choice for many years. . Electronic caliper, 0-6” (0-150mm), w/o output, with plastic case.

 

Starrett K53-8-N Stainless Steel Carpenters Try Square, 8″ Length - Eight-inch try square for marking and measuring right angles in woodworking. Stainless steel blade for durability and rust resistance. Two-inch cast aluminum handle for durability. Inch graduations in 8ths of an inch on both sides of the blade are etched and staggered in a height pattern for readability.

 

Starrett CH604R-6 6 2-Sided Steel Ruler with Hook - Spring tempered steel with satin chrome finish. Flush starts on both sides. Hook may be reversed or removed. Useful for measuring around corners, through hubs, for setting inside calipers, etc. Starrett 6″ x 3/4″ x 0. . 043″ ruler with hook permits accurate measurements even when the user cannot see if the ruler is even with the measuring edge.

 

Starrett 11H-6-4R 6-Inch Combination Square with Cast Iron Head and Black Wrinkle Finish - Graduation no 4r, 1/8″, 1/16″, quick reading 1/32″, 1/64″. Bearing surface is accurately ground. Cast iron head with black wrinkle finish. Cast iron head. Hardened steel, machine divided blade. Square blade easy-to-read, sharp graduation. Black wrinkle finish. 4r grad 8ths, 16ths, quick reading 32nds, 64ths. With reversible lock bolt, scriber, spirit level. Reversible lock bolt.

 

Starrett 18AA Automatic Center Punch With Adjustable Stroke, 4″ Length, 7/16″ Diameter - Adjustable stroke. Knurled finger grips for ease of handling. Steel is hardened and tempered. Hardened and tempered steel components provide wear resistance and strength. Automatic center punch with 4″ length and 7/16″ diameter punches a starter dimple without the need for a hammer. Spring tension regulates stroke for uniform dimple size at each setting. Point can be removed for replacement or sharpening. Stroke impact can be adjusted by turning knurled cap.

 

Starrett KBS1224-10 Bi-Metal Unique High Speed Steel Safe-Flex Hacksaw Frame Blade, 0.025″ Thick, 24 TPI, 12″ Length x 1/2″ Width (Pack of 10) - Bi-metal unique safe-flex hacksaw frame blade. Measures 12-inches length by 1/2-inches width. Made with a patented solid-state diffusion process with 170 percent more high speed steel weld area and ground teeth. For reduced blade fracture, faster cutting and longer life. 24 teeth per inch.

 

Starrett 1202F-6 Dial Caliper, Stainless Steel, White Face, 0-6″ Range, +/-0.001″ Accuracy, 0.010″ Resolution, Meets Specifications - Rack teeth point down to keep foreign matter from clogging the gear, to help prevent measurement error. Positive, spring-loaded double opinion anti-backlash control. Hardened stainless steel bar, measuring surfaces, rack, gears, and depth rod for accuracy and long life. The 1202f shows measurements as fractions on the yellow outer scale with 1/64th-inch graduations and decimal measurements on the white inner scale with 1/100th inch graduations. Thumb-operated fine adjustment roll allows for one-hand use. Hardened stainless steel bar, measuring surfaces, rack, gears and depth rod. Sharp black graduations on the satin finished bar. Knife-edge contacts, thumb-operated fine adjustment roll, adjustable bezel and lock screws for sliding jaw and dial bezel. Dial graduations of 001″ and 1/64″, with one revolution equivalent to 0100″. Lock screw holds the sliding jaw in position, to ensure a consistent measurement.

 

Starrett Measure Stix SM66W Steel White Measure Tape with Adhesive Backing, English Graduation Style, Left To Right Reading, 6′ Length, 0.75″ Width, 0.0625″ Graduation Interval - Reads left to right or right to left. Mounts on work benches, saw tables, drafting tables, etc. Manufactured of high quality precision steel for extended service use. Easily cut to size with scissors. Produced with permanent adhesive back that sticks to almost any work surface for convenient, at-a-glance measurements.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.