Kodiak Cutting Tools KCT142723 USA Made Stub Length Solid Carbide Drill Bit, 2 Flute, #58 Wire Diameter, 3/8″ Length of Cut, 1-1/2″ Overall Length
- . #58 wire diameter solid carbide drill, stub length 3/8″ length of cut 1-1/2″ overall length 2 flute stub length drill bit, carbide.
Viking Drill and Tool 43670 Type 260-T 135 Degree Split Point Black Heavy Duty Stub Length Drill Bit Set (11 Piece)
- 1/16, 3/8 by 32nds, 135-degree split point. Nas 907c screw machine length. 11 pc set screw machine length heavy duty 135-degree split point. Black oxide prevents chip building, galling and welding commonly used for low carbon, stainless and ferrous metals. High speed steel provides good wear resistance, can be used in general purpose applications for ferrous and nonferrous materials.
Bassett DS Series Solid Carbide Spade Stub Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Spiral Flute, 118 Degrees Point, 3/32″ Size (Pack of 1)
- Round shanks allow use with a wide variety of toolholding systems. Straight flute drill bits are well suited for drilling in hard materials and are also well-suite to drilling in lathe applications. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Applicable for non-ferrous material, stainless steel and hardened steel.
Kodiak Cutting Tools KCT217424 USA Made Solid Carbide Drill Bit, AlTiN Coated, Stub Length, 2 Flute, 1/8″ Diameter, 3/4″ Length of Cut, 2″ Overall Length
- 1/8 inch diameter solid carbide drill, stub length 3/4″ length of cut 2″ overall length altin coating 2 flute stub length drill bit, carbide. .
YG-1 D4107 High Speed Steel Split Point Stub Length Drill Bit, TiN Finish, Straight Shank, Slow Spiral, 135 Degree, 10.25mm Diameter x 89mm Length (Pack of 1)
- Special twist drills for automatic and turret lathes. Made of cobalt steel. 33 degree helix. 135 degree point angle. Application drills suitable for drilling in thin materials with portable drills.
Kodiak Cutting Tools KCT217512 USA Made Solid Carbide Drill Bit, Stub Length, AlTiN Coated, 2 Flute, 1/4″ Diameter, 1-1/4″ Length of Cut, 2-1/2″ Overall Length
- . 1/4 inch diameter solid carbide drill, stub length 1-1/4″ length of cut 2-1/2″ overall length altin coating 2 flute stub length drill bit, carbide.
Kodiak Cutting Tools KCT217380 USA Made Solid Carbide Drill Bit, Stub Length, AlTiN Coated, 2 Flute, 1/16″ Diameter, 13/32″ Length of Cut, 1-1/2″ Overall Length
- . 1/16 inch diameter solid carbide drill, stub length 13/32″ length of cut 1-1/2″ overall length altin coating 2 flute stub length drill bit, carbide.
YG-1 D4107 High Speed Steel Split Point Stub Length Drill Bit, TiN Finish, Straight Shank, Slow Spiral, 135 Degree, 5.75mm Diameter x 66mm Length (Pack of 1)
- Made of cobalt steel. 135 degree point angle. Application drills suitable for drilling in thin materials with portable drills. 33 degree helix. Special twist drills for automatic and turret lathes.
YG-1 M15 High Speed Steel Multi 1 Powdered Metal Stub Length Drill Bit, TiAlN Finish, Straight Shank, 135 Degree, 25/64″ Diameter x 3-7/8″ Length (Pack of 1)
- Application applicable to various materials including aluminum and stainless,. No centering required. 135 degree point angle. Minimal drill wandering and improved hole tolerances. Excellent wear resistance by using premium powder metallurgy materals. Better tool life with excellent coating.
Kodiak Cutting Tools KCT218546 USA Made Solid Carbide Drill Bit, Stub Length, AlTiN Coated, 2 Flute, #52 Wire Diameter, 7/16″ Length of Cut, 1-1/2″ Overall Length
- . #52 wire diameter solid carbide drill, stub length 7/16″ length of cut 1-1/2″ overall length altin coating 2 flute stub length drill bit, carbide.
YG-1 M15 High Speed Steel Multi 1 Powdered Metal Stub Length Drill Bit, TiAlN Finish, Straight Shank, 135 Degree, 5/16″ Diameter x 3-3/8″ Length (Pack of 1)
- Excellent wear resistance by using premium powder metallurgy materals. 135 degree point angle. No centering required. Better tool life with excellent coating. Minimal drill wandering and improved hole tolerances. Application applicable to various materials including aluminum and stainless,.
YG-1 D4107 High Speed Steel Split Point Stub Length Drill Bit, TiN Finish, Straight Shank, Slow Spiral, 135 Degree, 9.35mm Diameter x 84mm Length (Pack of 1)
- 33 degree helix. Application drills suitable for drilling in thin materials with portable drills. Made of cobalt steel. 135 degree point angle. Special twist drills for automatic and turret lathes.
Bassett DM Series Solid Carbide Stub Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Straight Flute, 118 Degrees Four-Facet Point, 1/16″ Size, 1-5/8″ Length (Pack of 1)
- Round shanks allow use with a wide variety of toolholding systems. Straight flute drill bits are well suited for drilling in hard materials and are also well-suite to drilling in lathe applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Applicable for non-ferrous material, cast iron and steel.
Bassett DM Series Solid Carbide Stub Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Straight Flute, 118 Degrees Four-Facet Point, #30 Size, 1-15/16″ Length (Pack of 1)
- Round shanks allow use with a wide variety of toolholding systems. Applicable for non-ferrous material, cast iron and steel. Straight flute drill bits are well suited for drilling in hard materials and are also well-suite to drilling in lathe applications. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.
YG-1 M17 High Speed Steel Multi 1 Powdered Metal Stub Length Drill Bit, TiAlN Finish, Straight Shank, 135 Degree, O Size, 5/16″ Diameter x 3-1/2″ Length (Pack of 1)
- Better tool life with excellent coating. Application applicable to various materials including aluminum and stainless,. 135 degree point angle. Excellent wear resistance by using premium powder metallurgy materals. No centering required. Minimal drill wandering and improved hole tolerances.
Bassett DS Series Solid Carbide Spade Stub Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Spiral Flute, 118 Degrees Point, 3/8″ Size (Pack of 1)
- Straight flute drill bits are well suited for drilling in hard materials and are also well-suite to drilling in lathe applications. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Applicable for non-ferrous material, stainless steel and hardened steel. Round shanks allow use with a wide variety of toolholding systems. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.
Kodiak Cutting Tools KCT141711 USA Made Solid Carbide Stub Length Drill Bits, 2 Flute, 1-3/8″ Length of Cut, 3″ Overall Length, 3/8″ Diameter
- . 3/8 inch diameter solid carbide drill, stub length 1-3/8″ length of cut 3″ overall length 2 flute stub length drill bit, carbide.
YG-1 D4107 High Speed Steel Split Point Stub Length Drill Bit, TiN Finish, Straight Shank, Slow Spiral, 135 Degree, 8.75mm Diameter x 84mm Length (Pack of 1)
- 33 degree helix. Special twist drills for automatic and turret lathes. Made of cobalt steel. 135 degree point angle. Application drills suitable for drilling in thin materials with portable drills.
Bassett DS Series Solid Carbide Spade Stub Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Spiral Flute, 118 Degrees Point, 1/8″ Size (Pack of 1)
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Round shanks allow use with a wide variety of toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Applicable for non-ferrous material, stainless steel and hardened steel. Straight flute drill bits are well suited for drilling in hard materials and are also well-suite to drilling in lathe applications.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
