Best 21 Flush Trims for 2020

 

CMT 807.128.11 3-in-I Flush Trim Bit for MDF & Laminates, 1/4-Inch Shank, 1/2-Inch Cutting Length - Cmt bits were rated the best overall in comparison to other brand (test by wood magazine). Super-strength superior steel, non-stick orange shield coating. Non-freezing delrin bearing reduces the chance of bearing failure and doesn’t ruin work surface. 1/2-inch cutting diameter, 2-9/64-inch length ideal on plastic laminates and aluminum laminates. 2 sinterhip hi-density industrial chrome carbide cutting edges.

 

Bosch 85268MC Carbide Tip 3/8 x 1 Flush Trim with Ball Bearing Double Flute 1/4 Shank - Ideal for fast, smooth, accurate trim cuts. Carbide tipped for durability. Long bit life. Micrograin bits provides chatter-free trimming.

 

CMT 806.191.11 Super-Duty Flush Trim Bit, 1-Inch Cutting Length, 1/4-Inch Shank - 2 hi-density carbide cutting edges and negative shear angle design for long-lasting performance. 3/4-inch cutting diameter, 2-59/64-inch length. Work quickly and safely to get a superior finish with absolute minimal chipping. Equipped with a bearing for easy and efficient template work. For flush trimming on both natural wood and laminates.

 

CMT 806.692.11 Super-Duty Flush Trim Bit with 1-1/2-Inch Cutting Length and 1/2-Inch Shank - Down shear design allows for clean smooth cuts on many materials. Equipped with a bearing for easy efficient template work. 2 carbide cutting tips for long-lasting performance. Work quickly and safely to get a superior finish with absolute minimal chipping. 3/4-inch diameter, 3-43/64-inch overall length.

 

Amana Tool 45481 Flush Trim/Pattern Plunge 1/2-Inch Diameter by 3/8-Inch Cutting Height by 1/4-Inch Shank Carbide Tipped Router Bit - 2-1/4-inch length. 1/2-inch cutting diameter. Carbide tipped, industrial quality. 3/8-inch cutting height. 1/4-inch shank, 2 flute.

 

Amana Tool 45465 Flush Trim/Pattern Plunge 3/4-Inch Diameter by 1-3/4-Inch Cutting Height by 1/2-Inch Shank Carbide Tipped Router Bit - 3/4-inch cutting diameter. 1/2-inch shank, 2 flute. Carbide tipped, industrial quality. 1-3/4-inch cutting height. 3-3/4-inch length.

 

Yonico 14135 Pattern/Flush Trim Router Bit with 2-1/2-Inch Cutter Top and Bottom Bearing 1/2-Inch Shank - Especially useful for template work when routing rounded or curvy wood with sensitive end-grains. This bit can be used with either a top or bottom template. The top and bottom bearings allow you to flip over the wood stock when you reach “up-grain” and rout that segment in a “down-grain” direction, maintaining uniform smoothness around the work-piece. The yonico 14135 top and bottom bearing router bit is great for all your large stock trim applications.

 

CMT 806.095.11 Flush Trim bit, 1/4-Inch Shank, 1-Inch Cutting Length, Carbide-Tipped - Super-strength superior steel, non-stick orange shield coating. 2 sinterhip hi-density industrial chrome carbide cutting edges. 3/8-inch cutting diameter, 2-11/16-inch length, bearing included. For cutting hardwood/softwood, laminates use on router tables only, not for hand-held routers. Cmt bits were rated the best overall in comparison to other brand (test by wood magazine).

 

Yonico 14121 Solid Carbide Flush Trim Router Bit- Spiral Upcut 1/4-Inch Shank - Made from extremely durable solid carbide, the yonico 14121 is ideal for use with soft & hard woods, ply-woods, composites, laminates, plastics and some non-ferrous metals. New redesigned with permanent bearing retaining collar to reduce trimming mishaps. 1/4″ shank. The yonico 14121 solid carbide flush trim upcut router bit is designed to provide extra clean and smooth flush trim cuts. Spiral upcut router bits are ideally used for router table template applications causing wood shavings to spin downwards and away from work piece area. The two independent ball bearing guides at the tip ensure smooth operation every time.

 

Roman Carbide DC1829 Straight Flush Trim Set, 1/4-Inch Shank, 3-Piece - 1/2-inch by 13/16-inch with bottom guide bearing. 5/8-inch by 3/4-inch with top guide bearing. 1/2-inch by 3/4-inch with top guide bearing. 1/4-inch shank diameter.

 

Freud 50-501 Top & Bottom Bearing Flush Trim Bits 1/4-Inch shank Features Freuds TiCo? Hi-Density Carbide with Titanium - Multi-axis grinding for burn free cuts. Perma-shield coating to resist heat. The product is 1-1/4dbl flush trim bit. Features freud’s tico¿ hi-density carbide with titanium for long life and a flawless finish. Oversized carbide teeth offer more sharpenings and longer life. Shear angle design produces superior finish. Easy and simple use kit. The product is manufactured in china.

 

Bosch 85441M 1/2-Inch Diameter 1-Inch Cut Carbide Tipped Double Flute Flush Trim Router Bit 1/2-Inch Shank With Ball Bearing - All bits must be inserted in the full length of the collet be sure to use only router bits and accessories specifically designed for your router. Recommended for use with a routing table.

 

Whiteside Router Bits 2408 Flush Trim Bit with 1/2-Inch Cutting Diameter and 2-Inch Cutting Length - Made in america. Whiteside machine company was founded in 1970 as a general purpose machine shop in the basement of bill & bobbie whiteside’s home. Ft. Several woodworking magazines have tested whiteside versus the competition and selected whiteside as the winner for best router bits available in the market. Committed to quality. A strong commitment to customer problem-solving, a can-do attitude, and innovative ideas, along with a growing core of dedicated employees, helped the business evolve into a manufacturer of woodworking equipment and tooling. Today, whiteside machine occupies a 40,000 sq. Come on, give us a try. Whiteside’s quality, innovation, and customer commitment is still present in our superb product line, in the design of custom tooling to fill special customer requirements, and in the development of special machinery and tooling for our own manufacturing use. Primarily through repeat business and referrals, the tooling business continued to grow to meet a demand for quality production router bits as well as custom application tooling. As always, whiteside machine is continuously striving to improve our product through new technology, improved production techniques, and ongoing research and development efforts along with rigid quality control, vital customer feedback and extensive field testing. Manufacturing facility and produces a complete line of solid carbide and carbide tipped router bits. Located in western north carolina near the furniture manufacturing town of hickory, the company was often involved in making repairs or special parts for the furniture and woodworking field. Whiteside machine company has been in the router bit business for over 30 years providing customer with quality products while at the same time striving to achieve complete customer satisfaction. Family owned and operated. Whiteside machine company.

 

Freud 50-116 Top Bearing Flush Trim Router Bit, 3/4″ Diameter by 1″ Carbide Cutting Length 1/2″ Shank - Non-stick perma-shield coating that reduces gumming, rusting, and corrosion for longer life with less wear. Features freud’s tico hi-density carbide with titanium for long life and a flawless finish. Freud’s limited lifetime guarantee. 3/4-inch diameter, 1-inch carbide cutting length, 1/2-inch shank. Easy and simple use kit. The product is manufactured in china. Cuts all composition materials, plywoods, hardwoods, and softwoods. The product is 1 inch top bearing trim bit.

 

2pcs 3″ Long 2 Blades Flush Trim Router Bit 1/4″ x 1/4″ for Carpenter - Shank diameter 635mm / 1/4″cutting diameter 635mm / 1/4″. Product name flush trim bitstandard 1/4″ x 1/4″bearing diameter 7mm. Color silver tone, bluematerial steel, carbide. Cutting depth 30mm / 12″total length 76mm / 3″. Net weight 111gpackage content 2 x flush trim bit 1 x plastic case.

 

Yonico 14132 Pattern/Flush Trim Router Bit with 3/4-Inch X 2-Inch 1/2-Inch Shank - Great for combined plunge-cutting and pattern / template routing. For increased work piece visibility, use the top bearing flush trim bit in a handheld router allowing the template to be positioned on top of the work piece. 1/2″ shank. Extra long cutter for multiple or extra-thick stock. Can be used without the bearing as a standard straight bit. In a router table, template will be positioned underneath the work piece. Two flute carbide cutters with enclosed ball bearing.

 

CMT 806.690.11 Super-Duty Flush Trim Bit, 1/2-Inch Shank, 2-Inch Cutting Length, Carbide-Tipped - 2 sinterhip hi-density industrial chrome carbide cutting edges. Cmt bits were rated the best overall in comparison to other brand (test by wood magazine). Super-strength superior steel, non-stick orange shield coating. 3/4-inch cutting diameter, 4-5/16-inch length, bearing included. For cutting hardwood/softwood, laminates use on router tables only, not for hand-held routers.

 

Whiteside Router Bits 2715 Combination Flush Trim Bit with Top and Bottom Bearing - Primarily through repeat business and referrals, the tooling business continued to grow to meet a demand for quality production router bits as well as custom application tooling. Ft. Come on, give us a try. Made in america. Located in western north carolina near the furniture manufacturing town of hickory, the company was often involved in making repairs or special parts for the furniture and woodworking field. Whiteside machine company was founded in 1970 as a general purpose machine shop in the basement of bill & bobbie whiteside’s home. A strong commitment to customer problem-solving, a can-do attitude, and innovative ideas, along with a growing core of dedicated employees, helped the business evolve into a manufacturer of woodworking equipment and tooling. Manufacturing facility and produces a complete line of solid carbide and carbide tipped router bits. Whiteside machine company. Today, whiteside machine occupies a 40,000 sq. Committed to quality. Several woodworking magazines have tested whiteside versus the competition and selected whiteside as the winner for best router bits available in the market. Whiteside machine company has been in the router bit business for over 30 years providing customer with quality products while at the same time striving to achieve complete customer satisfaction. As always, whiteside machine is continuously striving to improve our product through new technology, improved production techniques, and ongoing research and development efforts along with rigid quality control, vital customer feedback and extensive field testing. Family owned and operated. Whiteside’s quality, innovation, and customer commitment is still present in our superb product line, in the design of custom tooling to fill special customer requirements, and in the development of special machinery and tooling for our own manufacturing use.

 

Whiteside Router Bits RFTD2100 1/4-Inch Cutting Diameter and Spiral Flush Trim Bit with Down Cut - Whiteside machine company. Whiteside machine company was founded in 1970 as a general purpose machine shop in the basement of bill & bobbie whiteside’s home. A strong commitment to customer problem-solving, a can-do attitude, and innovative ideas, along with a growing core of dedicated employees, helped the business evolve into a manufacturer of woodworking equipment and tooling. Ft. Family owned and operated. Located in western north carolina near the furniture manufacturing town of hickory, the company was often involved in making repairs or special parts for the furniture and woodworking field. Several woodworking magazines have tested whiteside versus the competition and selected whiteside as the winner for best router bits available in the market. Today, whiteside machine occupies a 40,000 sq. Whiteside machine company has been in the router bit business for over 30 years providing customer with quality products while at the same time striving to achieve complete customer satisfaction. Made in america. Whiteside’s quality, innovation, and customer commitment is still present in our superb product line, in the design of custom tooling to fill special customer requirements, and in the development of special machinery and tooling for our own manufacturing use. Come on, give us a try. Manufacturing facility and produces a complete line of solid carbide and carbide tipped router bits. As always, whiteside machine is continuously striving to improve our product through new technology, improved production techniques, and ongoing research and development efforts along with rigid quality control, vital customer feedback and extensive field testing. Committed to quality. Primarily through repeat business and referrals, the tooling business continued to grow to meet a demand for quality production router bits as well as custom application tooling.

 

Whiteside Router Bits RFT2100 1/4-Inch Diameter Spiral Flush Trim Up Cut - Whiteside’s quality, innovation, and customer commitment is still present in our superb product line, in the design of custom tooling to fill special customer requirements, and in the development of special machinery and tooling for our own manufacturing use. As always, whiteside machine is continuously striving to improve our product through new technology, improved production techniques, and ongoing research and development efforts along with rigid quality control, vital customer feedback and extensive field testing. Primarily through repeat business and referrals, the tooling business continued to grow to meet a demand for quality production router bits as well as custom application tooling. Come on, give us a try. A strong commitment to customer problem-solving, a can-do attitude, and innovative ideas, along with a growing core of dedicated employees, helped the business evolve into a manufacturer of woodworking equipment and tooling. Whiteside machine company has been in the router bit business for over 30 years providing customer with quality products while at the same time striving to achieve complete customer satisfaction. Manufacturing facility and produces a complete line of solid carbide and carbide tipped router bits. Made in america. Committed to quality. Located in western north carolina near the furniture manufacturing town of hickory, the company was often involved in making repairs or special parts for the furniture and woodworking field. Several woodworking magazines have tested whiteside versus the competition and selected whiteside as the winner for best router bits available in the market. Family owned and operated. Today, whiteside machine occupies a 40,000 sq. Whiteside machine company was founded in 1970 as a general purpose machine shop in the basement of bill & bobbie whiteside’s home. Whiteside machine company. Ft.

 

Yonico 14120 Flush Trim Solid Carbide Spiral Down-Cut Router Bit 1/4-Inch Shank - Down-cut spiral. Satisfaction guaranteed & lifetime warranty. Build-up and heat resistant teflon coating. Permanent forced on bearing retaining collar. C3 micro-grain tungsten carbide cutters. Industrial quality router bits. Solid carbide. Solid hardened steel bodies with anti-kickback design. Satisfaction guaranteed and lifetime warranty.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.