Diamond Carbide Mini Turning Tool
- Ash handles feature a molded rubber end for a secure, effortless grip and excellent ergonomics. Ash handles are 9-1/2″ long from the butt of the handle to the top of the stainless steel ferrule. This diamond carbide mini turning tool from rockler features a replaceable and rotatable cutter that eliminates the hassle and downtime of sharpening. Â Also available from rockler round carbide mini turning tool square carbide mini turning tool carbide mini turning tool 3-piece set. Technical details ideal for use as a parting tool, and for tight profiles. Total overall length of mini turning tool is approximately 13-1/2″. The handles are made of solid ash encased with a thick, molded rubber end for an enhanced grip and reduced fatigue. The solid carbide cutter also stays sharp for longer when compared with steel, giving you a much longer useful life. Length of the diamond cutter is 1-1/8″, with an angle of about 35 degrees. Simply rotate the carbide cutter for a fresh, sharp edge, and replace it once all available edges have grown dull. Shaft features a flattened back for stability when using the tool rest. Note carbide cutters are not interchangeable between the different tools. Length of the shaft is approximately 4″.
3/4″ Indexable Carbide Insert Turning Tool Bit Set
- There is one each of ar, al, br, bl and e, 5 pcs spare screws, 2 l wrench, a and built-in chipbreaker groove is included. . 52 inserts made of c6 carbide material. This 3/4 inch indexible turning tool set contains 5 tcmt32.
Individual Indexable Carbide Turning Tool – SHANK: .3750″ SQ Overall Length : 2/1/2″
- Shank. 3750″ sq use insert # tcmt-21. 5x overall length 2/1/2″ cutting direction right hand insert ic 1/4″.
12mmx 12mm Handle Tungsten Carbide Turning Tool Holder Silver Tone
- Fit for most lathe. Used for medium and higher degree cutting, and precise milling. Suitable for cutting stainless steel, cast iron, cast steel, forging steel, alloy steel material workpiece, make it more glossy and remove blank. Made from tungsten carbide material, flat cutting edge, tough for milling use.
Individual Indexable Carbide Turning Tool – SHANK: .6250″ SQ Overall Length : 4″
- 5x overall length 4″ cutting direction left hand insert ic 3/8″. 6250″ sq use insert # tcmt-32. Shank.
HHIP 2003-0003 1/2 Inch 5 Piece Indexable Carbide Turning Tool Set
- 5piece set includes one of each, ar, al, br, bl & e. Tpgh & tcmt style. C-5 inserts, 5pc spare screws and 2 l-wrench included. .
Individual Indexable Carbide Turning Tool – SHANK: .500″ SQ Overall Length : 3-1/2″
- 5x overall length 3-1/2″ cutting direction right hand insert ic 3/8″. 500″ sq use insert # tcmt-32. Shank.
Savannah 3 Piece Large Carbide Turning Tool Set
- The savannah carbide turning tools eliminate the need for sharpening of your turning tools since it features a rotatable cutter head. The solid wood ash handle is coated with a comfortable rubber grip on the base that transitions to the wooden top part of the handle seamlessly. The solid carbide stays sharper for a longer period of time in comparison to steel tools. 99 each. The savannah large carbide turning tools are designed with ease of use in mind. It is ideal for wood turners of all skill levels and helps ensure success right from the start. All you have to do is rotate the the cutter head for a clean, sharp edge and continue turning. The comfortable rubber grip helps reduce hand fatigue while turning. Once the cutter head is completely used, simply replace it with a new carbide cutter. Set includes the large round (# 7537), square (# 7538) and diamond (# 7539) cutter tools, each of which can be purchased separately for $89. With the savannah large carbide turning tool, you can get right to turning without all the fuss. To make turning even more enjoyable, the shaft of the savannah carbide turning tool also features a flat back for stability while your turning.
Individual Indexable Carbide Turning Tool – SHANK: .3750″ SQ Overall Length : 2/1/2″
- Shank. 5x overall length 2/1/2″ cutting direction right hand insert ic 1/4″. 3750″ sq use insert # tcmt-21.
uxcell 12mmx 12mm Handle Tungsten Carbide Turning Tool Holder Silver Tone 2 Pcs
- 1. Used for medium and higher degree cutting, and precise milling. Fit for most lathe. Suitable for cutting stainless steel, cast iron, cast steel, forging steel, alloy steel material workpiece, make it more glossy. Made from tungsten carbide material, flat cutting edge, tough for milling use. 2. 3.
Individual Indexable Carbide Turning Tool – SHANK: .500″ SQ Overall Length : 3-1/2″
- Shank. 500″ sq use insert # tcmt-32. 5x overall length 3-1/2″ cutting direction neutral insert ic 3/8″.
HHIP 2003-0005 3/4 Inch 5 Piece Indexable Carbide Turning Tool Set
- C-5 inserts, 5pc spare screws and 2 l-wrench included. Tpgh & tcmt style. . 5piece set includes one of each, ar, al, br, bl & e.
YUFU-Round Carbide Replacement lathe tools Insert Cutter 5/8 Inch Diameter 16mm, Pack of 10, For Full And Pro Size Hollower Lathe Wood Turning
- Per pack of 10 pcs round carbide insert cutters,diameter approximately 5/8″ (16mm) thickness 118″ (3mm) with a 178″ dia countersink mounting hole at std 82 degrees. Optimal grinding process produces the flattest and smoothest cutting surface. Mounts with flat head screws, m4 or m5, leaves smooth finishing after cut. The perfect grade of carbide provides the best combination of the sharpness and durability. Excellent for hollowing bowls, designed for all small &mid size hollowers,the right geometry or cutting angle is ground to provide an edge the cuts cleanly and safely,ex.
Individual Indexable Carbide Turning Tool – SHANK: .500″ SQ Overall Length : 3-1/2″
- 5x overall length 3-1/2″ cutting direction right hand insert ic 3/8″. Shank. 500″ sq use insert # tcmt-32.
7 Pc 5/8” Indexable Carbide Turning Lathe Tool Set SCLCL SDJCR SWGCR SDNCN
- (1) sclcr 5/8″(1) swgcr 5/8”(1) ser 5/8”-16(1) mgehr 5/8”-3. Case includedcase overall dimension 5-5/8”l x 10”w x 1-3/8”h. Carbide inserts length4-1/2”longcarbide inserts include(1)sclcl 5/8″(1)sdncn 5/8″(1)sdjcr 5/8″. Quantity 1 shipping weight415 lbs. 7 pc 5/8” indexable carbide turning tool set.
YUFU-Diamond shape Carbide Replacement Insert Cutter 10mm(.39″)X28mm(1.10″),Diameter 4.3mm(.17″) , Pack of 10, For Mini, Mid Full And Pro Size Detailers Lathe Wood Turning Cutting Tools
- 30 degree cutting angle , mount with #4-40 8mm flat head screw. Made of solid tungsten carbide, providing you a better experience and durable use. Holds a cutting edge up to 20 times longer than hss,10 pcs per pack, save more . Size diamond shape 10mm (39″) x 28mm(110″) , thickness 25mm (10″) , dia 43mm(17″). Optimal grinding process produces the flattest and smoothest cutting surface.
1″ Indexable Carbide Insert Turning Tool Bit Set
- There is one each of ar, al, br, bl and e, 5 pcs spare screws, 2 l wrench, a and built-in chipbreaker groove is included. This 1 inch indexible turning tool set contains 5 tcmt32. 52 inserts made of c6 carbide material.
Individual Indexable Carbide Turning Tool – SHANK: .3750″ SQ Overall Length : 3-1/2″
- Shank. 5x overall length 3-1/2″ cutting direction neutral insert ic 1/4″. 3750″ sq use insert # tcmt-21.
Individual Indexable Carbide Turning Tool – SHANK: .6250″ SQ Overall Length : 4″
- 6250″ sq use insert # tcmt-32. 5x overall length 4″ cutting direction left hand insert ic 3/8″. Shank.
Savannah Hollowing Carbide Turning Tool
- The unique shape of the hollower neck is designed to give you better access to the most difficult hollow form shapes. The handle measures approximately 19″ in length from the butt to the stainless steel ferrule and is coated with a rubber grip at the base to reduce hand fatigue. The round carbide cutter head can be rotated as needed for clean, sharp cutting edge. The shank is flat on both sides offering you great stability while hollowing small or large forms. Designed to allow any skill level of turners to achieve high quality results for hollowing work with virtually no fuss. . Once the carbide cutter is completely used up, simply replace the tip with a new one (item#10753). The savannah hollowing carbide turning tool is the perfect tool for under-cutting hollow forms. The shank measure approximately 8-3/4″ from the top of the stainless steel ferrule to the center of the carbide cutter head.
Individual Indexable Carbide Turning Tool – SHANK: .750″ SQ Overall Length : 4-1/2″
- Shank. 750″ sq use insert # tcmt-32. 5x overall length 4-1/2″ cutting direction right hand insert ic 3/8″.
Round Carbide Turning Tool Replacement Cutter -R1
- Cutter rotates, giving you numerous fresh edges with no need for sharpening. Sharpened on a diamond wheel to 1500 grit. Solid carbide stays sharper for longer, when compared with steel. . This solid carbide cutter was sharpened on a diamond wheel to 1500 grit, and can be rotated to give you a fresh edge in only seconds use it with the round carbide mini turning tool or the round carbide pen turning tool (both sold separately) to get smooth finishes on concave surfacestechnical details ideal for giving you a smooth finish on curved, concave surfaces and for general turning applications.
Square Carbide Mini Turning Tool Replacement Cutter – S1
- This solid carbide cutter was sharpened on a diamond wheel to 1500 grit, and can be rotated to give you a fresh edge in only seconds use it with the square carbide mini turning tool (sold separately) for flat or convex areas on spindles and pen turnings. Technical details ideal for giving you a smooth finish on straight pieces such as pens and other mini turning projects cutter rotates giving you four fresh edges for maximum life sharpened on a diamond wheel of up to 1500 grit.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
