Best 25 Aircraft Drill Bits for 2020

 

Drill America 732 x 6 High Speed Steel Aircraft Extension Drill Bit Pack of 12 DAA Series

Drill America 7/32″ x 6″ High Speed Steel Aircraft Extension Drill Bit (Pack of 12), D/AA Series

Drill America 7/32″ x 6″ High Speed Steel Aircraft Extension Drill Bit (Pack of 12), D/AA Series - Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. Round shanks allow use with a wide variety of toolholding systems. Manufactured to national aerospace standard 907. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

 

Morse Cutting Tools 16703 - Aircraft Drill Bit - 332 in High Speed Steel 1-14 in Flute 135 ° Point 12 in OAL

Morse Cutting Tools 16703 – Aircraft Drill Bit – 3/32 in, High Speed Steel, 1-1/4 in Flute, 135 ° Point, 12 in OAL

Morse Cutting Tools 16703 – Aircraft Drill Bit – 3/32 in, High Speed Steel, 1-1/4 in Flute, 135 ° Point, 12 in OAL - Specspoint angle 135 material high speed steeloverall length 12 infinish/coating black oxidedrill bit size 3/32 inseries 1391flute length 1-1/4 incoolant delivery external.

 

Ace Professional Aircraft Drill Bit 01-04672

Ace Professional Aircraft Drill Bit (01-04672)

Ace Professional Aircraft Drill Bit (01-04672) - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Sold on amazon. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Ace professional aircraft drill bit (01-04672). Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge.

 

Morse Cutting Tools 16594 - Aircraft Drill Bit - 2764 in High Speed Steel 3-1516 in Flute 135 ° Point 6 in OAL

Morse Cutting Tools 16594 – Aircraft Drill Bit – 27/64 in, High Speed Steel, 3-15/16 in Flute, 135 ° Point, 6 in OAL

Morse Cutting Tools 16594 – Aircraft Drill Bit – 27/64 in, High Speed Steel, 3-15/16 in Flute, 135 ° Point, 6 in OAL - Specspoint angle 135 material high speed steeloverall length 6 infinish/coating black oxidedrill bit size 27/64 inseries 1390flute length 3-15/16 incoolant delivery external.

 

2 each Ace Professional Aircraft Drill Bit 01-04680

2 each: Ace Professional Aircraft Drill Bit (01-04680)

2 each: Ace Professional Aircraft Drill Bit (01-04680) - Sku # 2107951. (1 unit = each. Carded. ) For drilling in hard to reach areas and to run wires & cable. 3/8″ x 12″. Sold as 2 units at $13. Split point with heavy duty web. Manufacturer number 01-04680. 135 deg. Country of origin (tba). Distributed by bosch tool group-vermont amer. 62 per unit.

 

Century Drill Tool 33524 38 Aircraft Drill Bit by 6

Century Drill & Tool 33524 3/8″ Aircraft Drill Bit by 6″

Century Drill & Tool 33524 3/8″ Aircraft Drill Bit by 6″ - Aircraft extension drill bits are used when reach is important in tight areas to avoid damage from drill flutes. Overall length is 6″. Designed for drilling through materials less than 4″ thick. Aircraft extension drill bits are surface treated high speed steel with 135 degree quick-cut points that will not walk or wander.

 

Galaxy A12062 HIGH Speed Steel Aircraft Drill BIT 116IN

Galaxy A12.062 HIGH Speed Steel Aircraft Drill BIT 1/16IN

Galaxy A12.062 HIGH Speed Steel Aircraft Drill BIT 1/16IN - For all your car care needs and moreplease contact us if you need any assistance. For general use in wood, metal, and plastic black oxide coating resists corrosion 135 degree split point ensures a true start and eliminates bit walking thanks for choosing midway auto supply. Size 1/16 in.

 

Vermont American 13164 732 x 6 Black Oxide Extended LengthAircraft Drill Bit

Vermont American 13164 7/32″ x 6″ Black Oxide Extended Length/Aircraft Drill Bit

Vermont American 13164 7/32″ x 6″ Black Oxide Extended Length/Aircraft Drill Bit - 135-degree split point for fast starts and minimal walking or skating. 7/32″ diameter. 6″ overall length. 1 bit per package. 2-1/2″ flute length.

 

38X12 AIRCRAFT DRILL BIT AHN-61224 Y47153

3/8″X12″ AIRCRAFT DRILL BIT (AHN-61224) Y47153

3/8″X12″ AIRCRAFT DRILL BIT (AHN-61224) Y47153 - Please contact us if you need any assistance. Y47153. Be sure to checkout our other listings. 3/8″x12″ aircraft drill bit (ahn-61224) ideal for drilling in hard-to-reach areas and for running wires and cable bit is constructed of m-2 high speed steel for the best combination of strength, heat resistance, and wear resistance for general use in wood, metal, and plastic black oxide coating resists corrosion 135 degree split point ensures a true start and eliminates bit walking thanks for choosing midway auto supply for all your car care needs and more.

 

Drill America 2764 x 6 HSS Aircraft Extension Drill Bit DAACX62764

Drill America 27/64″ x 6″ HSS Aircraft Extension Drill Bit, D/AA/CX627/64

Drill America 27/64″ x 6″ HSS Aircraft Extension Drill Bit, D/AA/CX627/64 - Flute length 3-15/16. Item model number d/aa/cx627/64. Size 27/64. Dec equivalent 4219. Overall length 6 inches.

 

Aircraft Drill Bit 332 Inch 6 Inch Oal-2 Pack

Aircraft Drill Bit 3/32 Inch 6 Inch Oal-2 Pack

Aircraft Drill Bit 3/32 Inch 6 Inch Oal-2 Pack - 2 pack aircraft drill bit 3/32 inch 6 inch oal. For general use in wood, metal, and plastic black oxide coating resists corrosion 135 degree split point ensures a true start and eliminates bit walking thanks for choosing midway auto supply. For all your car care needs and moreplease contact us if you need any assistance.

 

Drill America 1132 x 12 HSS Aircraft Extension Drill Bit DAACX121132

Drill America 11/32″ x 12″ HSS Aircraft Extension Drill Bit, D/AA/CX1211/32

Drill America 11/32″ x 12″ HSS Aircraft Extension Drill Bit, D/AA/CX1211/32 - Cutting angle 135 point type split point. Size 11/32, material high speed steel, finish black oxide, flute length 3-7/16, overall length 12, shank type round, style aircraft extension, cutting angle 135, point type split point, number of flutes 2, cutting direction right hand. Shank type round style aircraft extension. Number of flutes 2 cutting direction right hand. Flute length 2-5/16″ overall length 6″.

 

IVY Classic 46524 38-Inch x 12-Inch Aircraft Drill Bit M2 High-Speed Steel 135-Degree Split Point 1Card

IVY Classic 46524 3/8-Inch x 12-Inch Aircraft Drill Bit, M2 High-Speed Steel, 135-Degree Split Point, 1/Card

IVY Classic 46524 3/8-Inch x 12-Inch Aircraft Drill Bit, M2 High-Speed Steel, 135-Degree Split Point, 1/Card - Precision ground, hardened and tempered m2 high-speed steel. Drill diameter 3/8-inch, overall length 12-inch. Designed for drilling steel, wood and plastic, premium swift bore (registered trademark). 12-inch length for hard to reach and deep drilling applications. 135-degree split point for fast penetration and accurate self-centering with no center punch.

 

IVY Classic 46532 12-Inch x 12-Inch Aircraft Drill Bit M2 High-Speed Steel 135-Degree Split Point 1Card

IVY Classic 46532 1/2-Inch x 12-Inch Aircraft Drill Bit, M2 High-Speed Steel, 135-Degree Split Point, 1/Card

IVY Classic 46532 1/2-Inch x 12-Inch Aircraft Drill Bit, M2 High-Speed Steel, 135-Degree Split Point, 1/Card - 12-inch length for hard to reach and deep drilling applications. Designed for drilling steel, wood and plastic, premium swift bore (registered trademark). Drill diameter 1/2-inch, overall length 12-inch, shank 3/8-inch reduced shank. Precision ground, hardened and tempered m2 high-speed steel. 135-degree split point for fast penetration and accurate self-centering with no center punch.

 

Morse Cutting Tools 85957 - MARXMANTM Aircraft Drill Bit - 14-E in High Speed Steel 2-34 in Flute 135 ° Point 6 in OAL

Morse Cutting Tools 85957 – MARXMANTM Aircraft Drill Bit – 1/4-E in, High Speed Steel, 2-3/4 in Flute, 135 ° Point, 6 in OAL

Morse Cutting Tools 85957 – MARXMANTM Aircraft Drill Bit – 1/4-E in, High Speed Steel, 2-3/4 in Flute, 135 ° Point, 6 in OAL - Specspoint angle 135 material high speed steeloverall length 6 infinish/coating black oxidedrill bit size 1/4-e inseries 139flute length 2-3/4 incoolant delivery external.

 

Morse Cutting Tools 85971 - MARXMANTM Aircraft Drill Bit - 1532 in High Speed Steel 4-516 in Flute 135 ° Point 6 in OAL

Morse Cutting Tools 85971 – MARXMANTM Aircraft Drill Bit – 15/32 in, High Speed Steel, 4-5/16 in Flute, 135 ° Point, 6 in OAL

Morse Cutting Tools 85971 – MARXMANTM Aircraft Drill Bit – 15/32 in, High Speed Steel, 4-5/16 in Flute, 135 ° Point, 6 in OAL - Specspoint angle 135 material high speed steeloverall length 6 infinish/coating black oxidedrill bit size 15/32 inseries 139flute length 4-5/16 incoolant delivery external.

 

Aircraft Drill Bit 316 Inch-2 Pack

Aircraft Drill Bit 3/16 Inch-2 Pack

Aircraft Drill Bit 3/16 Inch-2 Pack - 2 pack aircraft drill bit 3/16 inch. Self-centering 135-degree split point penetrates hard material without a pilot hole and produces small chips to reduce clogging. Aircraft extension drill bit meets nas 907 type c specifications and has a 6″ overall length for drilling hard-to-reach areas. Designed for drilling high-tensile strength alloy steel. Black oxide finish reduces wear while promoting chip and coolant flow.

 

6 Pcs 28 X 6 Cobalt Gold Aircraft Extension Drill Bit Glbcox628 Flute Length 1-34 Overall Length 6

6 Pcs, #28 X 6″ Cobalt Gold Aircraft Extension Drill Bit, Glbcox628, Flute Length: 1-3/4″; Overall Length: 6″

6 Pcs, #28 X 6″ Cobalt Gold Aircraft Extension Drill Bit, Glbcox628, Flute Length: 1-3/4″; Overall Length: 6″ - Size #28 material cobalt finish gold. Number of flutes 2 cutting direction right hand. Cutting angle 135 point type split point. Shank type round style aircraft extension. Flute length 1-3/4″ overall length 6″.

 

Morse Cutting Tools 16601 - Aircraft Drill Bit - 116 in High Speed Steel 78 in Flute 135 ° Point 6 in OAL Pack of 15

Morse Cutting Tools 16601 – Aircraft Drill Bit – 1/16 in, High Speed Steel, 7/8 in Flute, 135 ° Point, 6 in OAL, Pack of 15

Morse Cutting Tools 16601 – Aircraft Drill Bit – 1/16 in, High Speed Steel, 7/8 in Flute, 135 ° Point, 6 in OAL, Pack of 15 - Specspoint angle 135 material high speed steeloverall length 6 infinish/coating black oxidedrill bit size 1/16 inseries 1390flute length 7/8 incoolant delivery external.

 

Morse Cutting Tools 16589 - Aircraft Drill Bit - 1132 in High Speed Steel 3-716 in Flute 135 ° Point 6 in OAL

Morse Cutting Tools 16589 – Aircraft Drill Bit – 11/32 in, High Speed Steel, 3-7/16 in Flute, 135 ° Point, 6 in OAL

Morse Cutting Tools 16589 – Aircraft Drill Bit – 11/32 in, High Speed Steel, 3-7/16 in Flute, 135 ° Point, 6 in OAL - Specspoint angle 135 material high speed steeloverall length 6 infinish/coating black oxidedrill bit size 11/32 inseries 1390flute length 3-7/16 incoolant delivery external.

 

2 each Ace Professional Aircraft Drill Bit 01-04682

2 each: Ace Professional Aircraft Drill Bit (01-04682)

2 each: Ace Professional Aircraft Drill Bit (01-04682) - Carded. ) For drilling in hard to reach areas and to run wires & cable. Sold as 2 units at $15. 135 deg. Country of origin (tba). (1 unit = each. Sku # 2107969. 7/16″ x 12″. Manufacturer number 01-04682. Distributed by bosch tool group-vermont amer. 42 per unit. Split point with heavy duty web.

 

Morse Cutting Tools 85991 - MARXMANTM Aircraft Drill Bit - 516 in High Speed Steel 3-316 in Flute 135 ° Point 12 in OAL

Morse Cutting Tools 85991 – MARXMANTM Aircraft Drill Bit – 5/16 in, High Speed Steel, 3-3/16 in Flute, 135 ° Point, 12 in OAL

Morse Cutting Tools 85991 – MARXMANTM Aircraft Drill Bit – 5/16 in, High Speed Steel, 3-3/16 in Flute, 135 ° Point, 12 in OAL - Specspoint angle 135 point type split pointoverall length 12 inshank diameter 5/16 inshank type plain roundseries 139drill bit size 5/16 inparabolic flutes noflute length 3-3/16 incoolant delivery externalmaterial high speed steelspiral/cut right hand spiral/right hand cutfinish/coating black oxidedouble margin no.

 

IVY Classic 46528 716-Inch x 12-Inch Aircraft Drill Bit M2 High-Speed Steel 135-Degree Split Point 1Card

IVY Classic 46528 7/16-Inch x 12-Inch Aircraft Drill Bit, M2 High-Speed Steel, 135-Degree Split Point, 1/Card

IVY Classic 46528 7/16-Inch x 12-Inch Aircraft Drill Bit, M2 High-Speed Steel, 135-Degree Split Point, 1/Card - Designed for drilling steel, wood and plastic, premium swift bore (registered trademark). Drill diameter 7/16-inch, overall length 12-inch, shank 3/8-inch reduced shank. 12-inch length for hard to reach and deep drilling applications. Precision ground, hardened and tempered m2 high-speed steel. 135-degree split point for fast penetration and accurate self-centering with no center punch.

 

Vermont American 13166 Black Oxide Fractional Extended Length Aircraft Drill Bit 14-Inch by 6-Inch

Vermont American 13166 Black Oxide Fractional Extended Length Aircraft Drill Bit, 1/4-Inch by 6-Inch

Vermont American 13166 Black Oxide Fractional Extended Length Aircraft Drill Bit, 1/4-Inch by 6-Inch - Triple tempered black oxide coating provides very high lubricity to reduce heat buildup and prolong the life of the bit. Features a 135-degree split point for fast starts and minimal walking or skating. Superior durability and speed for most general purpose drilling applications in wood, metal and plastic.

 

Bosch BL2631 116 In x 6 In Extra Length Aircraft Black Oxide Drill Bit

Bosch BL2631 1/16 In. x 6 In. Extra Length Aircraft Black Oxide Drill Bit

Bosch BL2631 1/16 In. x 6 In. Extra Length Aircraft Black Oxide Drill Bit - For use in steel, copper, aluminum, brass, oak, maple, mdf, pine, pvc, polycarbonate, acrylic, abs, nylon and composite materials. Available in jobber length, stubby length, extended length (aircraft), 1/2 in reduced shank (silver and deming). Speed helix design for three times faster drilling than standard bits. Easier drilling, reduced heat and extended drill bit life. Last 50 percent longer than high-speed steel.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.