Freud 16-104 3/4-Inch Diameter by 1/2-Inch Mortising Router Bit, 1/4-Inch Shank
- . Promoting safer woodworking is the reason freud made a commitment to develop anti-kickback router bits. Bits are computer balanced to insure vibration-free operation at speeds that are a safe margin above the typical 22,000 rpms of most routers. Freud’s philosophy is woodworkers should expect safety, not pay for it. Freud’s precision ground carbide bits have a grain size smaller than other grades, and titanium is added making them impervious to chemical attack. Over all diameter 3/4-inch, shank diameter 1/4-inch.
Niagara Cutter N30326 High Speed Steel (HSS) Square Nose End Mill, Inch, Uncoated (Bright) Finish, Finishing Cut, 30 Degree Helix, 3 Flutes, 6.5″ Overall Length, 1.000″ Cutting Diameter, 1.000″ Shank Diameter
- Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials. Three flutes provide better chip-carrying capacity than four flutes and a finer finish than two, reducing the need for a second finishing cut in some applications. Square nose end mills (also called square end) create sharp, unrounded cuts. Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling. High-speed steel is compatible with a variety of materials.
Eagle Tool EHS25054 Heavy Duty Split Point High Speed Installer Bit, 3/16″ Shank Diameter, 1/4″ Head Diameter x 54″ Length, For Steel (Pack of 1)
- Add a quick switch hex to adapt to a quick change chuck part number ethxkit187. Flexible spring steel shank with wire fishing accommodation holes in the shank. Made in usa. Heavy duty high speed, split point for better starting. Three flat non-slip grip on the chuck end.
Niagara Cutter N37647 High Speed Steel Square Nose End Mill, Weldon Shank, Uncoated, Roughing/Finishing Cut, Non-Center, 30-Degree, 8-Flute, 6.5″ OAL, 2.000″ Cut Diameter, 1.250″ Shank Diameter
- Square nose end mills (also called square end) create sharp, unrounded cuts. Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials. Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling. Number of flutes varies fewer flutes have more chip-carrying capacity and more flutes produce a finer finish. High-speed steel (hss) is compatible with a variety of materials.
Niagara Cutter N33101 High Speed Steel Square Nose End Mill, Weldon Shank, Uncoated, Roughing/Finishing Cut, Non-Center, 30-Degree, 4-Flute, 3.375″ OAL, 0.313″ Cut Diameter, 0.375″ Shank Diameter
- Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials. High-speed steel (hss) is compatible with a variety of materials. Square nose end mills (also called square end) create sharp, unrounded cuts. Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling. Number of flutes varies fewer flutes have more chip-carrying capacity and more flutes produce a finer finish.
Eagle Tool EHS37554 Heavy Duty Split Point High Speed Installer Bit, 3/16″ Shank Diameter, 3/8″ Head Diameter x 54″ Length, For Steel (Pack of 1)
- Three flat non-slip grip on the chuck end. Heavy duty high speed, split point for better starting. Made in usa. Flexible spring steel shank with wire fishing accommodation holes in the head and shank. Add a quick switch hex to adapt to a quick change chuck part number ethxkit187.
Freud 04-102 3/16-Inch Diameter by 1/2-Inch Double Flute Straight Router Bit with 1/4-Inch Shank
- Freud’s precision ground carbide bits have a grain size smaller than other grades, and titanium is added making them impervious to chemical attack. Bits are computer balanced to insure vibration-free operation at speeds that are a safe margin above the typical 22,000 rpms of most routers. Cut diameter 3/16-inch, cut length 1/2-inch, shank diameter 1/4-inch. Promoting safer woodworking is the reason freud made a commitment to develop anti-kickback router bits. Freud’s philosophy is woodworkers should expect safety, not pay for it.
Micro 100, RSC-250-2, Right Hand Cut Double Ended, Split-End, 60° Included Angle Engraving Tool, 3/8″ Split Length, .004″ Offset Point, 1/4″ Shank Diameter, 2.5″ Overall Length, Solid Carbide Tool
- Each tool’s cutting edge/tip has a distinctive mirror like finish that significantly adds to material removal while improving surface finishes. Designed and engineered with a standard conical v-shape for most common engraving and marking applications. Micro 100 solid carbide tools feature more than just a micro-grain of excellent quality. Micro 100, rsc-250-2, 60° included angle, double ended, split-end, solid carbide engraving tool. For over 45 years, micro 100 is a known industry leader and internationally acclaimed. Their substrate is in a class of its own resulting from an exclusive treating processes that allow for increased speed and feed rates and allowing for longer tool life. . Excellent for engraving applications in most materials from soft , medium, to hard materials.
Eagle Tool US EA37554 Auger Style Flex Installer Bit for Wood, 3/16″ Shank Diameter, 3/8″ Head Diameter x 54″ Length
- Add a quick switch hex to adapt to a quick change chuck part number ethxkit187. Aggressive and self feeding auger point. Three flat non-slip grip on the chuck end. Flexible spring steel shank with wire fishing accommodation holes in the head and shank. Made in usa.
Niagara Cutter N90284 High Speed Steel Square Nose End Mill, Weldon Shank, Uncoated (Bright) Finish, Finishing Cutting, 37-Degree, 2-Flute, 4.125″ OAL, 0.875″ Cut Diameter, 0.75″ Shank Diameter
- 37-degree helix angle provides efficient cutting action and chip evacuation required to machine aluminum and other nonferrous materials. Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling. Square end creates sharp, unrounded cuts. High-speed steel is a common general-purpose steel for cutting tools. Two flutes offer better chip-carrying capacity than end mills with more flutes.
SGS Tool Company 19038 SD-3Nf Carbide Bur 3/8 Diameter 1/4 Shank Diameter
- Made in usa. Ball shape. 1/4 shank diameter. Sd-3nf bur.
Morris Products 13654 Carbide-Tip Masonry Bit, 12″ Length, 1-1/4″ Diameter, 1/2″ Shank Diameter
- Slow spiral. Shallow precision machined wide oval flutes lift & prevents dust packing. High grade alloy steel shank for strength and durability. Carbide tip resists dulling. Carbide-tip masonry bits, carbide tip masonry drill bit for brick, stone, slate and more.
F&D Tool Company 18122-F335 Multiple Flute End Mill, Single End, High Speed Steel, 7/8″ Mill Diameter, 1/2″ Shank Diameter, 1.875″ Flute Length, 3.875″ Overall Length, 4 Number of Flutes
- Regularly furnished with right hand cut and right hand spiral. Multiple flute endmill, single end, high speed steel. Mill diameter 7/8, shank diameter 1/2, flute length 1 7/8, overall length 3 7/8, number of flutes 4. Made in usa.
Eagle Tool US EA75054 Auger Style Flex Installer Bit for Wood, 1/4″ Shank Diameter, 3/4″ Head Diameter x 54″ Length
- Aggressive and self feeding auger point. Add a quick switch hex to adapt to a quick change chuck part number ethxkit250. Made in usa. Flexible spring steel shank with wire fishing accommodation holes in the head and shank. Three flat non-slip grip on the chuck end.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
