SpeTool 2Pcs 4-Flute CNC Carbide End Router Bit 3/16″ x 1/2″ Square Nose 3/16″ Shank Diameter with Coated
- For cnc, engraving machinecarbon steel, mould steel, inconel, stainless steel, titanium alloy etc. The route bit suit for cnc router and makita, bosch, and any brand plunge router with 3/16″ collet. End mill bits are suitable for side milling, end milling, finish machining, etc. Solid carbide spiral router bit with 3/16 inch shank and 3/16 inch cutting diameter, 5/8 inch cutting length, 2 inch for total length. Flat top with 4-flute, material hrc55 carbide with tialn coated.
Niagara Cutter N85950 Carbide Square Nose End Mill, Inch, Uncoated (Bright) Finish, Roughing and Finishing Cut, 30 Degree Helix, 3 Flutes, 3″ Overall Length, 0.500″ Cutting Diameter, 0.500″ Shank Diameter
- Three flutes provide better chip-carrying capacity than four flutes and a finer finish than two, reducing the need for a second finishing cut in some applications. Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials. Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures. Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling. Square nose end mills (also called square end) create sharp, unrounded cuts.
Niagara Cutter N88416 Cobalt Steel Square Nose End Mill, Weldon Shank, TiCN Finish, Roughing Cutting, Non-Center Cutting, 30-Degree, 6-Flute, 4.5″ OAL, 1.250″ Cut Diameter, 1.250″ Shank Diameter
- Titanium carbonitride(ticn) allows for optimal end mill and machine tool performance with it’s ability to increase material removal rates 3 to 5 times that of uncoated tools. Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. 6 flute design allows for this end mill to be fed 3 times faster that similar 2 flute end mills. Cobalt roughing end mill for working on all types of materials and high temperature alloys especially slotting and profiling.
CGC Tools CEM132F2TICN Primate Square Nose End Mill, TiCN Coating, 2 Flute, 1/32″ Diameter, 1/8″ LOC, 1-1/2″ OAL, 1/8″ Shank
- This weapon of mass production destroy any competition. Highest transverse rupture strength (trs) nano-grain carbide substrate available and completely resharpenable. Gmp edge prepped to hone the “ridges” to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish. Usa, flat, 2 flute, 1/32” diameter, 1/8” length of cut, 1-1/2” overall length, 1/8”shank, ticn coating. Extremely versatile in various materials, center cutting, solid sub-micron carbide.
CGC Tools GMA14F3 Gorilla Silverback Carbide Square Nose End Mill for Aluminum, Flat End, 3 Flute, 1/4″ Diameter, 3/4″ LOC, 2-1/2″ OAL
- Highest transverse rupture strength (trs) nano-grain carbide substrate available and completely resharpenable. Gmp edge prepped to hone the “ridges” to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish. Usa, silverback, flat, 3 flute, 1/4″ diameter, 3/4″ length of cut, 2-1/2″ overall length. Engineered to repel aluminum for roughing and finishing of non-ferrous materials, high velocity, high material removal rate.
Niagara Cutter N88621 Cobalt Steel Square Nose End Mill, Inch, Weldon Shank, TiCN Finish, Finishing Cut, 30 Degree Helix, 4 Flutes, 3.25″ Overall Length, 0.500″ Cutting Diameter, 0.500″ Shank Diameter
- Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel. Number of flutes varies fewer flutes have more chip-carrying capacity and more flutes produce a finer finish. Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling. Titanium carbon nitride (ticn) coating lubricates the end mill for high-temperature stability and offers better abrasion resistance than tin coating. Square nose end mills (also called square end) create sharp, unrounded cuts.
Dark Gray Stair Tread Rubber Square Nose 48″L
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment. Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. Can be used in profiling, keyways, and pockets. Not to be used for plunge cutting.
YG-1 E5977 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, Finishing Cut, Non-Center Cutting, 37 Deg Helix, 3 Flutes, 6″ Overall Length, 0.5″ Cutting Diameter, 0.5″ Shank Diameter
- Three flutes provide better chip-carrying capacity than four flutes and a finer finish than two, reducing the need for a second finishing cut in some applications. Suitable for high-performance machining on aluminum and other nonferrous materials. Extended-reach neck style provides access to recessed areas of the workpiece. 37-degree helix angle provides increased cutting action and chip evacuation compared to the standard 30-degree helix. Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
Wokesi Pack of 8,0.5/1/1.5/2/2.5/3/4/6mm Blade Diameter,Square Nose End Mill Set,4 Flute,HRC55,TiAlN Coated,Solid Tungsten Carbide,Router Bits Cutting Milling Tools(0.5/1/1.5/2/2.5/3/4/6mm HRC55)
- Suitable for process copply,alloy,iron and steel under hrc55(hra78). High micro hardness,high abrasion resistance,good toughness. Package1 pack of 8 pieces endmills. Materialtungsten carbide,high quality tialn coating,getting long tool life. Contains 8pcs square endmills05/1/15/2/25/3/4/6mm blade diameter.
Robert Sorby 823H 1″ Square Nose Scraper 21″ Overall Length 823H-1″
- Ash handles offer firm hand control during use and brass ferrules prevent wood splitting from tool pressure. Overall lengths 17″ to 21″. This hss 1″ square nose tool will keep a sharpened edge about six times longer than carbon steel and resist “blued” softening from overheating during grinding or from heavy turning.
YG-1 EMB20 Carbide Square Nose End Mill, Extra Long Reach, Vibration Resistant, AlTiN Monolayer Finish, 4 Flutes, 4″ Overall Length, 0.25″ Cutting Diameter, 0.25″ Shank Diameter
- Long-reach end mills have an extended shank for access to recessed areas of the workpiece. Variable helix angles combined with unequal flute spacing reduces vibration, improves surface finish, and provides higher cutting capacity and material-removal rates compared to conventional end mills. Carbide is harder than high-speed or cobalt steel, making it more wear resistant at high speeds and providing longer tool life. Suitable for high-performance machining on alloy steel, cast iron, stainless steel, titanium, nickel-based alloys, and most materials with a rockwell hardness less than c40. Aluminum titanium nitride (altin) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than tin, tialn, and ticn coatings.
CGC Tools CEM532F3 Primate Square Nose End Mill, 3 Flute, 5/32″ Diameter, 1/2″ LOC, 2″ OAL, 3/16″ Shank
- Gmp edge prepped to hone the “ridges” to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish. Extremely versatile in various materials, center cutting, solid sub-micron carbide. This weapon of mass production destroy any competition. Highest transverse rupture strength (trs) nano-grain carbide substrate available and completely resharpenable.
Melin Tool CCMG Carbide Micro Square Nose End Mill, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 1.5000″ Overall Length, 0.0700″ Cutting Diameter, 0.125″ Shank Diameter
- 30 degree helix angle. Round shanks allow use with a wide variety of toolholding systems. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Square end.
YG-1 EMD46 Carbide Square Nose End Mill, Vibration Resistant, TIALN Multilayer Finish, 4 Flutes, 3″ Overall Length, 0.5″ Cutting Diameter, 0.5″ Shank Diameter
- Four flutes produce a better finish than fewer flutes. Suitable for high-performance machining on mild steel, cast iron, tool steel, and low-hardened steel with a rockwell hardness up to c40. Aluminum titanium nitride (altin) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than tin, tialn, and ticn coatings. Variable helix angles combined with unequal flute spacing reduces vibration, improves surface finish, and provides higher cutting capacity and material-removal rates compared to conventional end mills. Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
SpeTool 2-Flute 7/32″ Cutting Dia Square Nose End Mill Carbide CNC Upcut Router Bits TiAlN Coated
- Flat top with 2-flute, material hrc55 carbide with tialn coated. The route bit suit for cnc router and makita, bosch, and any brand plunge router with 1/4″ collet. Solid carbide spiral router bit with 1/4 inch shank and 7/32 inch cutting diameter, 5/8 inch cutting length, 2-1/2 inch for total length. For cnc, engraving machinecarbon steel, mould steel, inconel, stainless steel, titanium alloy etc. End mill bits are suitable for side milling, end milling, finish machining, etc.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
