Woodpeckers Clamp Rack-IT (2 pack)
- Two lag bolts (included) install each rack. Put one up in different locations in your shop so the clamps you want are where you want them. Not only does clamp rack-it save space, it’s also the easiest-to-install clamp rack on the market today. You can install a single rack on a single stud, or to fit the most clamps in the least space, install a pair of stringers across studs (as shown in the photo) and install the racks between 6-1/2″ and 7-1/2″ apart (depending on your brand of clamp). The rack halves are just a fraction over 1-1/2″ apart and 12 inches deep, giving you plenty of room for heavy duty parallel jaw clamps. Keep them in easy reach from your various work areas. Woodpeckers new clamp rack-it saves valuable shop wall space by fitting 6 parallel jaw clamps into the space previously taken up by just two. The powder coated finish will keep looking great through years of clamping projects. The heavy gauge steel construction of the clamp rack-it won’t deflect or sag under load. Sold as a 2-pack. Or, take advantage of bare spots on your wall and fill them up with clamps. To install, drill two holes, screw the lag bolts in almost all the way, hang clamp rack-it halves on the lags, lock them down with a wrench or ratchet through the convenient access ports, and you’re ready to rack your clamps clamp rack-it lets you customize your clamp storage.
Tueascallk 9″ Heavy Duty Nylon Spring Clamps, Woodworking Clamp, for Home Improvement and Photography Projects, The Maximum Opening of the Jaw is About 4″, 2 Pieces
- ✔ size total length 9″, width 6-1/2″, thickness 1-1/2″, the maximum opening of the jaw is about 4″, jaw depth 3-1/5″. ✔ Made of high quality nylon material. ✔ Anti-slip design of handle. ✔ The soft, flexible, rotatable tip and small serrations provide additional grip in the jaws of the jaws. ✔ Heavy duty springs provide powerful grip.
T-Track Clamp, Metal Quick Acting Hold Down Clamp Set for T-Slot T-Track Woodworking Clamp Tool (1 x Whole Clamps Set)
- These clamps are useful in many woodworking & metalworking applications for work holding, positioning, and fixturing. Puts clamping pressure anywhere along the flush-mounted t-slot t-track. This is for a set of hold down clamp for use with t-slot track. Both t-screw and threaded rod are of 8mm threaded. Slides into t-track & quickly secures with the turn of the hand knob nut.
Tueascallk Nylon Spring Clamps, Woodworking Clamp, 2-1/2″, 3-3/4″, 4-1/2″, 6-1/5″ Four Specification Kits, for Home Improvement and Photography Projects, Set of 14
- ✔ 2-1/2″ total length 2-1/2″, width 2-1/5″, thickness 2/3″, jaw opening width 1-1/5″, jaw depth 1″ 3-3/4″ total length 3-3/4″, width3″, thickness3/4″, jaw opening width 1-1/2″, jaw depth 1-1/2″ 4-1/2″total length 4-1/2″, width 3-2/5″, thickness 1″, jaw opening width 1-4/5″, jaw depth 1-3/4″ 6-1/5″ total length 6-1/5″, width 4-1/2″, thickness 1-1/4″, jaw opening width 2-1/2″, jaw depth 2-1/2″. ✔ Made of high quality nylon material. ✔ The soft, flexible, rotatable tip and small serrations provide additional grip in the jaws of the jaws. ✔ Package includes 2-1/2″ 4pcs, 3-3/4″ 4pcs, 4-1/2″ 4pcs, 6-1/2″ 2pcs. ✔ heavy duty springs provide powerful grip, anti-slip design of handle.
F Bar Clamp, 4pcs 4inch F Clamps Woodworking Clamp Grip Quick Ratchet Release Squeeze DIY Hand Tool Kit
- Widely application f clamp is also called the quick woodworking clip, be used in furniture manufacturing and packaging industry a prefect helper for woodworking. Maximum clamping distance the bar clamps maximum clamping distance is up to 10cm it features large clamping distance and effort-saving, a practical woodworking hand tool to make small wood boards joint into a larger one. Fast shipping we shipped from us local, you will receive the item within 3-5 days. Premium quality this f bar clamps is made of plastic and aluminum alloy material, sturdy, durable and long lasting. Comfortable handle the grip with squeeze trigger is comfortable to hold, press quick-release button to slide arm into desired length slide the arm and hold wood in place easy to operate.
Woodworking Clamp for clamping Right Angle Joints
- Pairs well with our face frame clamp. Can be bought singly, but pair is recommended. Ideal for classic torsion-box construction. Holds boards up to 7/8 inch thick of any length.
4 Sets 3/4″ Quick Release Pipe Clamp Heavy Duty Iron Wide Base Wood Clamp Set for Wood Working
- 【Great stability】the large feet offers more stability and clearance between handle and worktop the ergonomic handle offers easier clamping and reduced hand fatiguecomfortable grip,effectively improve work efficiency. 【Fitment】suitable for 3/4″ threaded pipe, keeping your woodwork precise in place while gluing. 【Premium material】designed for light-duty work,constructed of tough cast iron,heavy duty construction,rust and corrosion,not easily deformed sturdy and durable to use offers a long time service. 【dimensions】jaw size (w x h) approx 83 x 51cm / 3 x 2inch mouth dia for pipe approx 28cm / 11inch clamp size (w x h) approx 75 x 165cm / 3 x 7inch handle length approx 11cm / 43inch. 【Quick release】the spring lever control locks jaw at any needed location and provides quick release.
Bora 12″ Parallel Clamp Set, 2 Pack of Woodworking Clamps with Rock-Solid, Even Pressure, 571112T
- Trusted bora quality, bora knows how important rock-solid clamping is to woodworkers and designed this product based on end-user feedback. Set of two 12″ parallel clamps. Strong and steady, the 3 5-inch wide padded jaw provides constant, even pressure without damaging material and the jaw stays in place when winding the clamp. Usable space 13 in. Multiple sizes, the bora parallel jaw clamp is right for any project, available in lengths 12″, 24″, 31″, 40″ and 50″. Perfect pressure, not too loose, not too tight, just right with 1, 100lbs (500kg) of clamping pressure.
DCT Wood Clamps, 1.5in Pinch Clamp Pinch Dog 10-Piece Set for Woodworking Wood Glue Up Gluing Table Panel Pinch Dogs
- Pinch dogs for wood working use the dct pinch dogs woodworking clamp set to tightly join glue up panels 15-inch (38cm) sizing permanently laser-etched on both sides of pinch clamps for easy identification. Ideal for glue-ups for gluing up woodworking projects that are hard to otherwise clamp these small clamps work on large biscuit panels and anything with an odd shape, angle, or curve such as round and oval table and countertops use for assembly clamping, column assembly, and pulling together a joint. Easy to use designed to tightly pinch together 2 boards while the applied glue dries (square corners over legs) simply tap the tips of an ear clamp into the end grain on your project with a hammer and tap them out with a hammer when finished we recommend keeping the points of the pinch dog clamps for woodworking fairly sharp to avoid splitting wood. Durable mini clamps constructed from steel for maximum strength and longevity so you do not have to worry about them easily twisting, bending, or breaking these staple-shaped miter clip pinch dogs have a square back for easy and straight driving and tapered legs. Perfect size for your needs package includes (10) 15-inch pinch clamps woodworking dogs for your convenience wood and wood glue not included.
Corner Clamp, 4PCS Corner clamps for woodworking, Multi-function Woodworking Right Angle Clamp Adjustable Swing Corner Clamp for Welding,Wood-Working,Drilling,Making Cabinets,Boxes, Drawers, etc.
- Materials rugged and durable materials make the pliers have a long service life. Precision right angle clamping tool adjustable floating head and plated rotating spindle screws for precise alignment and fixing of workpieces a must-have for woodworkers, handymen and diy”ers alike. Our woodworking clamps applicable size for boards with a thickness of 5-22mm, helps hold assemblies, perfect for aligning, nailing, woodworking, welding, screwing, making cabinets, box and picture frames. 4pcs 90 degree right angle clamp save labor time and reduce surface workload not only for 90 degree angles, but also for 45 degree saws allows two wood block of different thicknesses to be joined at a 90 degree angle. Corner clamps for woodworking one-hand operation, the second operation is free for the workpiece, simple and convenient.
HEWEGO Angle Clamp, 4PCS 90 Degree Corner Clamp, Multifunctional Picture Framing Holder, Woodworking Hand Tools (red)
- Holds joints at a 90, degree angle for precise secure assembly. 90° right angle clamp, holds joints at a 90 degree angle, whether you’re simply gluing or using fasteners, this miter style clamp will hold stock firm and square at an exact 90 degrees. Material aluminum alloy with steel screwclamping range 3 inch. High hardness, will not rust, suitable for the production of reinforced frame, tank production, etc. Compatible fit for woodworking, fish tank fixing, picture frame reinforcement, etc, while generally used for a group of fou.
ONDY 2 Pack Of 9″ Large Spring Clamps Heavy Duty Nylon Muslin Woodworking Clamps Photo Studio Backdrops Backgrounds Clamps Set, the Jaws Have a Maximum Opening of 4″
- Powerful and anti-slip — heavy duty springs provide powerful grip, anti-slip design of handle, very comfortable for using, smooth edges and corners to prevent from accidental scratching, considerable for every details. Flexible tip — its orange clamping tip is soft, flexible and rotatable with small serrations, which can provide additional grip in the jaws of the clamps. High quality– our large 9inch spring clamps are made of high quality nylon material, to be extremely heavy duty and super durable, with super strong clamping force, which can fix things tightly, brings much convenience to your work and life. Reinforced nylon constructions for tight, study and long-lasting hold durable pads(clamping chips) protect the finishergonomic handle for comfortable grip perfect companions for your photography, backdrops, woodworking, etc. Enlarged size — the total length of the clamp reach uo to 9inch, and its maxium opening jaws is 4inch, which can meet all kinds of usage in daily life such as woodworking, photo studio, backdrops, backgrounds, party, warehouse, etc applicable to anywhere you need.
Quick Grip Clamps Multisize 4 Pack Bar Clamp for Woodwork One Handed Release F Clamp for Woodworking [ 6 inch/4 inch ]
- Force for clamp ：6 inch 145 lb, 4 inch 49 lb. Flexible chuck- plastic jaws will not deform or scratch the workpiece,suit for woodworking and a variety of smaller projects craft. Dimensions- 6 inches and 4 inches suitable for workpiece clamping within 0-155mm,supporting a height of 75mm-320mm. Quick grip & release clamps- ratchet structure design for quick grip and release by one-handed completion, making work easier and more efficient. Multifunction- functional change of clamping or support by changing the direction of the chuck.
SE 6″ Wooden Ring Clamp – JT144RC
- The se 6″ wooden ring clamp is 6″ long without the wedge and has leather padding on both jaws. Se is committed to providing the customer with the best source for value possible on the market. You will enjoy the quality, function and usefulness of our se 6″ wooden ring clamp. The wedge is used to apply pressure to the gripping end of the clamp. This product is also handy for other items except rings. The jaws are about 1″ wide. Genuine se products come with the se logo on the packaging. Se is a registered trademark protected by us trademark law. Ipr rights noticeimportant avoid getting counterfeit items. It is very well-made and one end has a rounded jaw and the other end is square.
Mokell 7 Pieces6″ Heavy Duty Nylon Spring Clamps, Woodworking Clamp, for Home Improvement and Photography Projects
- ➤ Flexible tip — its orange clamping tip is soft, flexible and rotatable with small serrations, which can provide additional grip in the jaws of the clamps. ➤reinforced nylon construction, strength thicker springs, gripper stronger and safer 43 inch x 6 inch 25 inch mouth opening maximum. ➤ Anti-slip design of handle. ➤ Which can meet all kinds of usage in daily life such as woodworking, photo studio, backdrops, backgrounds, party, warehouse, etc applicable to anywhere you need. ➤ Made of high quality nylon material.
Jorgensen Size 2 8-1/2-Inch Handscrews Wood Clamp
- Double-lead threads provide strength and durability. The angle between the jaws can be adjusted to fit the work, allowing them to hold odd shapes easily. Wood clamp to keep your work pieces secure. Our handscrew clamps are easy to apply and remove quickly, and provide protection against marring of finished surfaces. Seasoned maple jaws remain firm and won’t damage your work. Seasoned, straight-grain hard maple wood jaws marry with cold-drawn steel spindles and nuts with special double-lead threads. Every jorgensen handscrew we make is crafted to ensure maximum strength and durability. Handles provide a comfortable grip. Together they create a handscrew clamp that holds tightly over broad areas, providing greater reach and a wider distribution of pressure than other clamps. 1-year limited warranty.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
