uxcell 5mm Radius 80mm Long 4 Flutes Straight Shank Corner Rounding End Mill
- Main color silver tone cutting diameter 16mm/06″. Cutting radius r5 flute number 4. Total length 80mm/3″ flute dia 6mm/02″. Product name corner rounding end mill shank diameter 16mm/06″. Weight 130g material hss-al package content 1 x corner rounding end mill, 1 x plastic case.
RedLine Tools RCR681345A – Double End, 3.5000″ Overall Length, .2500″ Radius, .6250″ Shank Diameter, 3 Flute, AlTiN, Carbide, Corner Rounding End Mill
- Shank diameter 6250″. Number of flutes 3. Made in the usa. Overall length 35000″. Radius 2500″.
RedLine Tools RCR681280A – Double End, 2.5000″ Overall Length, .0625″ Radius, .2500″ Shank Diameter, 3 Flute, AlTiN, Carbide, Corner Rounding End Mill
- Number of flutes 3. Overall length 25000″. Shank diameter 2500″. Radius 0625″. Made in the usa.
Richards Micro Tool 839F-2.013X.020 Corner Rounding End Mill, 2 Flute, Carbide, 0.125″ Shank Diameter, 0.031″ Radius
- . Double end, flared, 2 flute corner rounding end mill, with right hand direction of cut.
Melin Tool BRMG-S Carbide Micro Corner Rounding End Mill, Double End, Uncoated (Bright) Finish, Non-Center Cutting, 0 Deg Helix, 2 Flutes, 2″ Overall Length, 0.047″ Cutting Diameter, 0.25″ Shank Diameter
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Can provide uniform finish on corners. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Round shanks allow use with a wide variety of toolholding systems. Radius is form relieved.
HHIP 5800-4080 1/4″ x 1/2″ HSS Corner Rounding End Mill
- ~ Overall length is 3″. ~ Right hand cut. ~ Form-relieved type can be sharpened many times without changing the form. 1/4 x 1/2″ high speed steel corner rounding end mill ~ intended for use in milling rounded corners, etc. ~ Shank diameter is 1/2″. ~ Formed radius cutter. . ~ Mill diameter is 1″. ~ Radius is 1/4″.
Melin Tool RCMG Carbide Corner Rounding End Mill, Uncoated (Bright) Finish, Non-Center Cutting, 0 Deg Helix, 4 Flutes, 2″ Overall Length, 0.125″ Cutting Diameter, 0.1875″ Shank Diameter
- Round shanks allow use with a wide variety of toolholding systems. Can provide uniform finish on corners. Radius is form relieved. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.
Melin Tool BRMG-S Carbide Micro Corner Rounding End Mill, Double End, Uncoated (Bright) Finish, Non-Center Cutting, 0 Deg Helix, 2 Flutes, 1.5000″ Overall Length, 0.047″ Cutting Diameter, 0.125″ Shank Diameter
- Radius is form relieved. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems. Can provide uniform finish on corners.
Accusize – HSS Corner Rounding End Mill Set Size from 1/16” to 3/8”, 8 Pcs/Set, #1011-0008
- 3/8″, largest dia. 1/2″, overall length 2-1/2″), 1011-0018 (radius 1/8″, shank dia. 1/2″, largest dia. 7/8″, overall length 3″), 1011-1412 (radius 1/4″, shank dia. 1/2″, largest dia. 1″, overall length 3-1/8″), 1011-0512 (radius 5/16″, shank dia. 1-1/4″, overall length 3-1/2″). 7/16″, overall length 2-1/2″), 1011-0332 (radius 3/32″, shank dia. 1/2″, largest dia. 1-1/8″, overall length 3-1/4″), 1011-3878 (radius 3/8″, shank dia. Set include 1011-0116 (radius 1/16″, shank dia. 5/8″, overall length 3″), 1011-0532 (radius 5/32″, shank dia. 3/4″, overall length 3″), 1011-0312 (radius 3/16″, shank dia. 1/2″, largest dia. 3/8″, largest dia. 1/2″, largest dia. 1/2″, largest dia.
YG-1 E1237 High Speed Steel (HSS) Corner Rounding End Mill, Weldon Shank, Uncoated (Bright) Finish, Non-Center Cutting, 4 Flutes, 4.125″ Overall Length, 2.25″ Cutting Diameter, 0.75″ Shank Diameter
- Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials. Non-center-cutting design supports peripheral milling and finishing. Four flutes produce a better finish than fewer flutes. Corner rounding end mills are designed to take the edge off sharp corners. High-speed steel is compatible with a variety of materials.
Drill America DWCC Series High-Speed Steel End Mill, Polished Finish, Corner Rounding, 3/4″ Cutting Length, 1/4″ Cutting Diameter, 3-1/8″ Length, 1″ Shank (Pack of 1)
- Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment. Comes with corner rounding end mill. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Available in polished finish.
HHIP 5800-4050 5/32″ x 1/2″ HSS Corner Rounding End Mill
- ~ Right hand cut. . ~ Overall length is 3″. ~ Shank diameter is 1/2″. ~ Form-relieved type can be sharpened many times without changing the form. ~ Mill diameter is 3/4″. 5/32 x 1/2″ high speed steel corner rounding end mill ~ intended for use in milling rounded corners, etc. ~ Radius is 5/32″. ~ Formed radius cutter.
HHIP 5800-4020 1/16″ x 3/8″ HSS Corner Rounding End Mill
- ~ Formed radius cutter. ~ Mill diameter is 7/16″. . ~ Radius is 1/16″. ~ Overall length is 2-1/2. 1/16 x 3/8″ high speed steel corner rounding end mill ~ intended for use in milling rounded corners, etc. ~ form-relieved type can be sharpened many times without changing the form. ~ Shank diameter is 3/8″. ~ Right hand cut.
EM-RC8 1/4″ radius Corner Rounding End Mill- 3/4″ Shank, High Speed Steel
- Largest diameter 1″. Overall length 3 1/4″. Radius 1/4″. Shank diameter 3/4″. High speed steel.
TTC PRODUCTION 8 Piece H.S.S. Corner Rounding End Mill Set – Tool Material: H.S.S.
- . Includes (1) each of the following sizes 1/16″ & 3/32″ with 3/8″ shank (1) each of the following sizes 1/8″, 5/32″, 3/16″, 1/4″, 5/16″ & 3/8″ with 1/2″ shank wooden stand.
HHIP 5800-4160 1/2″ x 3/4″ HSS Corner Rounding End Mill
- ~ mill diameter is 1-1/2″. ~ Right hand cut. ~ Shank diameter is 3/4″. ~ Formed radius cutter. 1/2 x 3/4″ high speed steel corner rounding end mill ~ intended for use in milling rounded corners, etc. ~ Overall length is 3-7/8″. ~ Form-relieved type can be sharpened many times without changing the form. ~ Radius is 1/2″.
YG-1 E2237 Cobalt Steel Corner Rounding End Mill, Weldon Shank, Uncoated (Bright) Finish, Non-Center Cutting, 4 Flutes, 3″ Overall Length, 0.875″ Cutting Diameter, 0.5″ Shank Diameter
- Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials. Non-center-cutting design supports peripheral milling and finishing. Corner rounding end mills are designed to take the edge off sharp corners. Four flutes produce a better finish than fewer flutes. Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
