Best and Coolest 17 Thread Rollings in 2020

 

Steel Thread Rolling Screw for Plastic Black Oxide Finish Pan Head Phillips Drive 6-19 Thread Size 516 Length Pack of 100 #ad

Steel Thread Rolling Screw for Plastic, Black Oxide Finish, Pan Head, Phillips Drive, #6-19 Thread Size, 5/16″ Length (Pack of 100)

Steel Thread Rolling Screw for Plastic, Black Oxide Finish, Pan Head, Phillips Drive, #6-19 Thread Size, 5/16″ Length (Pack of 100) #ad - Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Black oxide finish offers mild corrosion resistance and lubricity. Thread rolling screw recommended for use in plastic. Steel is often used in applications where strength is the primary consideration. Pan head has a flat top and short vertical sides with a rounded top edge.

 

Steel Thread Rolling Screw for Plastic Black Oxide Finish 82 Degree Flat Head Phillips Drive 4-20 Thread Size 12 Length Pack of 100 #ad

Steel Thread Rolling Screw for Plastic, Black Oxide Finish, 82 Degree Flat Head, Phillips Drive, #4-20 Thread Size, 1/2″ Length (Pack of 100)

Steel Thread Rolling Screw for Plastic, Black Oxide Finish, 82 Degree Flat Head, Phillips Drive, #4-20 Thread Size, 1/2″ Length (Pack of 100) #ad - Steel is often used in applications where strength is the primary consideration. Thread rolling screw recommended for use in plastic. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Black oxide finish offers mild corrosion resistance and lubricity. Flat head has an 82-degree cone-shaped bearing surface for use in countersunk holes and a flat top that fits flush with the mated surface.

 

Steel Thread Rolling Screw for Plastic Black Oxide Finish Pan Head Phillips Drive 8-16 Thread Size 34 Length Pack of 50 #ad

Steel Thread Rolling Screw for Plastic, Black Oxide Finish, Pan Head, Phillips Drive, #8-16 Thread Size, 3/4″ Length (Pack of 50)

Steel Thread Rolling Screw for Plastic, Black Oxide Finish, Pan Head, Phillips Drive, #8-16 Thread Size, 3/4″ Length (Pack of 50) #ad - Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Steel is often used in applications where strength is the primary consideration. Thread rolling screw recommended for use in plastic. Pan head has a flat top and short vertical sides with a rounded top edge. Black oxide finish offers mild corrosion resistance and lubricity.

 

18-8 Stainless Steel Thread Rolling Screw for Plastic Passivated Finish Pan Head Phillips Drive 8-16 Thread Size 12 Length Pack of 50 #ad

18-8 Stainless Steel Thread Rolling Screw for Plastic, Passivated Finish, Pan Head, Phillips Drive, #8-16 Thread Size, 1/2″ Length (Pack of 50)

18-8 Stainless Steel Thread Rolling Screw for Plastic, Passivated Finish, Pan Head, Phillips Drive, #8-16 Thread Size, 1/2″ Length (Pack of 50) #ad - Pan head has a flat top and short vertical sides with a rounded top edge. 18-8 stainless steel provides good corrosion resistance and strength. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Passivated finish enhances the natural corrosion resistance of stainless steel. Thread rolling screw recommended for use in plastic.

 

Steel Thread Rolling Screw for Metal Zinc Plated 82 Degree Flat Head Star Drive 14-20 Thread Size 1 Length Pack of 50 #ad

Steel Thread Rolling Screw for Metal, Zinc Plated, 82 Degree Flat Head, Star Drive, 1/4″-20 Thread Size, 1″ Length (Pack of 50)

Steel Thread Rolling Screw for Metal, Zinc Plated, 82 Degree Flat Head, Star Drive, 1/4″-20 Thread Size, 1″ Length (Pack of 50) #ad - Thread rolling screw recommended for use in metal. Steel is often used in applications where strength is the primary consideration. Flat head has an 82-degree cone-shaped bearing surface for use in countersunk holes and a flat top that fits flush with the mated surface. Zinc plating resists corrosion and has a reflective appearance. Star drive has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a phillips or slotted drive.

 

18-8 Stainless Steel Thread Rolling Screw for Plastic Passivated Finish Pan Head Phillips Drive 2-28 Thread Size 14 Length Pack of 100 #ad

18-8 Stainless Steel Thread Rolling Screw for Plastic, Passivated Finish, Pan Head, Phillips Drive, #2-28 Thread Size, 1/4″ Length (Pack of 100)

18-8 Stainless Steel Thread Rolling Screw for Plastic, Passivated Finish, Pan Head, Phillips Drive, #2-28 Thread Size, 1/4″ Length (Pack of 100) #ad - Thread rolling screw recommended for use in plastic. Pan head has a flat top and short vertical sides with a rounded top edge. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Passivated finish enhances the natural corrosion resistance of stainless steel. 18-8 stainless steel provides good corrosion resistance and strength.

 

Steel Thread Rolling Screw for Plastic Black Oxide Finish Pan Head Phillips Drive 6-19 Thread Size 58 Length Pack of 100 #ad

Steel Thread Rolling Screw for Plastic, Black Oxide Finish, Pan Head, Phillips Drive, #6-19 Thread Size, 5/8″ Length (Pack of 100)

Steel Thread Rolling Screw for Plastic, Black Oxide Finish, Pan Head, Phillips Drive, #6-19 Thread Size, 5/8″ Length (Pack of 100) #ad - Steel is often used in applications where strength is the primary consideration. Thread rolling screw recommended for use in plastic. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Black oxide finish offers mild corrosion resistance and lubricity. Pan head has a flat top and short vertical sides with a rounded top edge.

 

Steel Thread Rolling Screw for Plastic Black Oxide Finish 82 Degree Flat Head Star Drive 8-16 Thread Size 34 Length Pack of 100 #ad

Steel Thread Rolling Screw for Plastic, Black Oxide Finish, 82 Degree Flat Head, Star Drive, #8-16 Thread Size, 3/4″ Length (Pack of 100)

Steel Thread Rolling Screw for Plastic, Black Oxide Finish, 82 Degree Flat Head, Star Drive, #8-16 Thread Size, 3/4″ Length (Pack of 100) #ad - Flat head has an 82-degree cone-shaped bearing surface for use in countersunk holes and a flat top that fits flush with the mated surface. Black oxide finish offers mild corrosion resistance and lubricity. Steel is often used in applications where strength is the primary consideration. Thread rolling screw recommended for use in plastic. Star drive has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a phillips or slotted drive.

 

Steel Thread Rolling Screw for Plastic Black Oxide Finish Pan Head Star Drive 10-14 Thread Size 1 Length Pack of 100 #ad

Steel Thread Rolling Screw for Plastic, Black Oxide Finish, Pan Head, Star Drive, #10-14 Thread Size, 1″ Length (Pack of 100)

Steel Thread Rolling Screw for Plastic, Black Oxide Finish, Pan Head, Star Drive, #10-14 Thread Size, 1″ Length (Pack of 100) #ad - Black oxide finish offers mild corrosion resistance and lubricity. Pan head has a flat top and short vertical sides with a rounded top edge. Star drive has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a phillips or slotted drive. Thread rolling screw recommended for use in plastic. Steel is often used in applications where strength is the primary consideration.

 

Steel Thread Rolling Screw for Plastic Zinc Plated Hex Washer Head 12-11 Thread Size 1-14 Length Pack of 25 #ad

Steel Thread Rolling Screw for Plastic, Zinc Plated, Hex Washer Head, #12-11 Thread Size, 1-1/4″ Length (Pack of 25)

Steel Thread Rolling Screw for Plastic, Zinc Plated, Hex Washer Head, #12-11 Thread Size, 1-1/4″ Length (Pack of 25) #ad - Steel is often used in applications where strength is the primary consideration. Zinc plating resists corrosion and has a reflective appearance. Thread rolling screw recommended for use in plastic. Hex washer head has a flange for additional contact with the mating surface that resists loosening and has six flat sides that a wrench can grip to turn from the side.

 

18-8 Stainless Steel Thread Rolling Screw for Plastic Passivated Finish Pan Head Phillips Drive 2-28 Thread Size 12 Length Pack of 100 #ad

18-8 Stainless Steel Thread Rolling Screw for Plastic, Passivated Finish, Pan Head, Phillips Drive, #2-28 Thread Size, 1/2″ Length (Pack of 100)

18-8 Stainless Steel Thread Rolling Screw for Plastic, Passivated Finish, Pan Head, Phillips Drive, #2-28 Thread Size, 1/2″ Length (Pack of 100) #ad - Pan head has a flat top and short vertical sides with a rounded top edge. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Passivated finish enhances the natural corrosion resistance of stainless steel. 18-8 stainless steel provides good corrosion resistance and strength. Thread rolling screw recommended for use in plastic.

 

Steel Thread Rolling Screw for Plastic Black Oxide Finish Pan Head Phillips Drive 3-24 Thread Size 12 Length Pack of 50 #ad

Steel Thread Rolling Screw for Plastic, Black Oxide Finish, Pan Head, Phillips Drive, #3-24 Thread Size, 1/2″ Length (Pack of 50)

Steel Thread Rolling Screw for Plastic, Black Oxide Finish, Pan Head, Phillips Drive, #3-24 Thread Size, 1/2″ Length (Pack of 50) #ad - Black oxide finish offers mild corrosion resistance and lubricity. Steel is often used in applications where strength is the primary consideration. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Pan head has a flat top and short vertical sides with a rounded top edge. Thread rolling screw recommended for use in plastic.

 

410 Stainless Steel Thread Rolling Screw for Plastic Passivated Finish Pan Head Phillips Drive 6-19 Thread Size 12 Length Pack of 50 #ad

410 Stainless Steel Thread Rolling Screw for Plastic, Passivated Finish, Pan Head, Phillips Drive, #6-19 Thread Size, 1/2″ Length (Pack of 50)

410 Stainless Steel Thread Rolling Screw for Plastic, Passivated Finish, Pan Head, Phillips Drive, #6-19 Thread Size, 1/2″ Length (Pack of 50) #ad - Thread rolling screw recommended for use in plastic. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. 410 stainless steel has high strength and hardness, and resists corrosion in mild environments. Pan head has a flat top and short vertical sides with a rounded top edge. Passivated finish enhances the natural corrosion resistance of stainless steel.

 

Steel Thread Rolling Screw for Plastic Black Oxide Finish Pan Head Star Drive 4-20 Thread Size 34 Length Pack of 100 #ad

Steel Thread Rolling Screw for Plastic, Black Oxide Finish, Pan Head, Star Drive, #4-20 Thread Size, 3/4″ Length (Pack of 100)

Steel Thread Rolling Screw for Plastic, Black Oxide Finish, Pan Head, Star Drive, #4-20 Thread Size, 3/4″ Length (Pack of 100) #ad - Pan head has a flat top and short vertical sides with a rounded top edge. Black oxide finish offers mild corrosion resistance and lubricity. Star drive has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a phillips or slotted drive. Steel is often used in applications where strength is the primary consideration. Thread rolling screw recommended for use in plastic.

 

18-8 Stainless Steel Thread Rolling Screw for Plastic Passivated Finish Pan Head Phillips Drive 4-20 Thread Size 12 Length Pack of 50 #ad

18-8 Stainless Steel Thread Rolling Screw for Plastic, Passivated Finish, Pan Head, Phillips Drive, #4-20 Thread Size, 1/2″ Length (Pack of 50)

18-8 Stainless Steel Thread Rolling Screw for Plastic, Passivated Finish, Pan Head, Phillips Drive, #4-20 Thread Size, 1/2″ Length (Pack of 50) #ad - Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Pan head has a flat top and short vertical sides with a rounded top edge. 18-8 stainless steel provides good corrosion resistance and strength. Thread rolling screw recommended for use in plastic. Passivated finish enhances the natural corrosion resistance of stainless steel.

 

18-8 Stainless Steel Thread Rolling Screw for Metal Passivated Finish Pan Head Star Drive 6-32 Thread Size 12 Length Pack of 50 #ad

18-8 Stainless Steel Thread Rolling Screw for Metal, Passivated Finish, Pan Head, Star Drive, #6-32 Thread Size, 1/2″ Length (Pack of 50)

18-8 Stainless Steel Thread Rolling Screw for Metal, Passivated Finish, Pan Head, Star Drive, #6-32 Thread Size, 1/2″ Length (Pack of 50) #ad - Star drive has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a phillips or slotted drive. Pan head has a flat top and short vertical sides with a rounded top edge. 18-8 stainless steel provides good corrosion resistance and strength. Passivated finish enhances the natural corrosion resistance of stainless steel. Thread rolling screw recommended for use in metal.

 

Steel Thread Rolling Screw for Plastic Black Oxide Finish Pan Head Star Drive 4-20 Thread Size 58 Length Pack of 100 #ad

Steel Thread Rolling Screw for Plastic, Black Oxide Finish, Pan Head, Star Drive, #4-20 Thread Size, 5/8″ Length (Pack of 100)

Steel Thread Rolling Screw for Plastic, Black Oxide Finish, Pan Head, Star Drive, #4-20 Thread Size, 5/8″ Length (Pack of 100) #ad - Steel is often used in applications where strength is the primary consideration. Star drive has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a phillips or slotted drive. Thread rolling screw recommended for use in plastic. Pan head has a flat top and short vertical sides with a rounded top edge. Black oxide finish offers mild corrosion resistance and lubricity.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.