PSI Woodworking PKM-ELC Maxi-Mandrel #1 Morse Taper
- Can be used with pkmsts1 live mandrel saver #1mt. Simply mount your tubes and bushings, then slide the shaft to the appropriate length and lock it in place. Includes (5) 7mm bushings, knurled nut, and 7mm drill bit. Features a 7mm mandrel shaft that slides through a headstock collet. #1 morse taper mount. This mandrel easily adapts to different length projects. 7/8″ wrenches (pkmwr) are not included. The shorter shaft reduces the likelihood of the mandrel shaft bowing.
3/8″ Expanding Mandrel/Arbor with #1 Morse Taper Shank
- 375) , designed to expand up to. —Requires use of a 1/4″-20 draw bar. 010 inches working length is 2-5/8 inches mounting shank is # 1 morse taper with a 1/4-20 internal thread for draw bars made from 12l14 soft machinable steel. Expanding machinable mandrel / arbor working diameter is 3/8″ (.
No.1 Morse Taper MT1 With B12 Arbor For Drill Chuck
- Qty 1. Manufacturer p/n zj1-10. No1 mt1 with b12 morse taper arbor for drill chuck.
Morse Cutting Tools 22955 Expansion Reamer, High-Speed Steel, Bright Finish, Straight Flute, 1 Morse Taper Shank, 6 Flutes, 9/16″ Size
- Recommended for reaming a wide range of materials. Expansion reamers are expandable to permit many regrinds to the original reamer size. Expansion screw should never be loosened to achieve a smaller reamer size. Expansion feature is for expansion and regrind to the original reamer size only. Not to be used as an adjustable reamer for producing different hole sizes.
Michigan Drill 200 Series High-Speed Steel General Purpose Drill Bit, 1 Morse Taper Shank, Spiral Flute, 118 Degrees Conventional Point, 17/64″ Size (Pack of 1)
- 118 degrees conventional point. Morse taper shank allows the tool to be inserted directly into the machine’s spindle to facilitate high-torque applications such as large cut diameters. 17/64-inches size. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
5/8″ Expanding Arbor with #1 Morse Taper Shank
- 625) , designed to expand up to. Expanding machinable arbor working diameter is 5/8″ (. 010 inches working length is 2-5/8 inches mounting shank is # 1 morse taper with a 1/4-20 internal thread for draw bars made from 12l14 soft machinable steel.
New 5 Pcs MT1 Morse Taper Collet Set 1/16″ To 5/16″ with 1/8″ 3/16″ 1/4″ Round Fit For Bridgeport
- Hardened and precision ground. 100% tested before shipping. 1/16″ thru 5/16″ x 16ths 5 pc #1 morse taper (mt) collet set (includes 1/16″, 1/8″, 3/16″, 1/4″, 5/16″ collets). Drawbar end 1/4″-20. Made of high grade tool steel.
Chicago Latrobe 110 High-Speed Steel Taper Shank Drill Bit, Black Oxide Finish, #1 Morse Taper Shank, 118 Degree Conventional Point, 13/64″ Size
- General-purpose geometry for drilling in a wide range of operating conditions and materials. Manufactured from premium high-speed steel. Taper shank made to american national standard (morse) dimensions for use in corresponding morse taper holders. Black oxide finish for increased wear resistance and added lubricity standard from stock.
9/16 inch expanding arbor/mandrel with No. 1 Morse Taper Shank
- ❣Built in washer to protect bearing from grit and dust. ❣100%guarantee-we provide a 15days no reason refund policy, make you buy with confidence order now. ❣Great for high speed turning, cnc work. ❣Made of finest 40cr, for durable long time use. ❣centers have 60 degree point.
Morse Cutting Tools 22952 Expansion Reamer, High-Speed Steel, Bright Finish, Straight Flute, 1 Morse Taper Shank, 6 Flutes, 7/16″ Size
- Not to be used as an adjustable reamer for producing different hole sizes. Expansion reamers are expandable to permit many regrinds to the original reamer size. Recommended for reaming a wide range of materials. Expansion screw should never be loosened to achieve a smaller reamer size. Expansion feature is for expansion and regrind to the original reamer size only.
OKSLO Drill Chuck Arbors 1 Morse Taper to 3 Jacobs Taper, 1 Morse Taper Shank by Drill
- Bearing steel hardened and ground high quality dead center. 3mt carbide lathe dead point center no1 morse taper #3 60 degree point. Accuracy 0000394″ morse taper 3” length size 5” bottom diameter 5/8” center point 60 degree.
Robert Sorby LSTB100 7/8 Inch Stebcenter Drive Center 1 Morse Taper
- The original stebcenter is an invaluable accessory for every woodturner. Because there are several points of contact there is minimal risk of splitting. In its patented design the stebcenter also features a spring-loaded point. This allows the turner to inspect his work without the need to switch off the lathe. The stebcenter can be used with equal confidence on both soft and hardwoods as well as synthetic materials. Where time is a critical factor the stebcenter is ideal as the work-piece can be quickly removed without stopping the lathe. Its ring of sharp teeth ensure that the stebcenter bites the wood to give more security and more drive. By slightly backing off the tail-stock the work piece still remains resting between the revolving center and the stebcenter. Fitted in the lathe head-stock it is a boon for both the novice and the experienced.
POWERTEC 71099 Precision Keyed Drill Chuck 1/32-1/2″ with Key and Threaded 1/2″-20 Morse Taper
- Practical design connects to a threaded arbor (included) that fits into the sleeve of your machine, making an exceptional lathe drill attachment perfect for drilling horizontally, chucking drill bits and woodworking projects. Function easily removes chuck assembly with wedge, drift key, or knock-out bar, and provides a smooth jaw operation while securely holding drill bits up to ½ inch in diameter. Capacity 1/32″, 1/2″ (1mm, 13mm). Compatible works with most wood and metal lathes, drill presses, portable drills, fits the 2mt mount. Includes (1) keyed drill chuck supplied with chuck key and 2 morse taper to 1/2″-20 threaded drill chuck arbor.
Michigan Drill 200 Series High-Speed Steel General Purpose Drill Bit, 1 Morse Taper Shank, Spiral Flute, 118 Degrees Conventional Point, 21/64″ Size (Pack of 1)
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Morse taper shank allows the tool to be inserted directly into the machine’s spindle to facilitate high-torque applications such as large cut diameters. 21/64-inches size. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 118 degrees conventional point.
3/4″ Expanding Mandrel/Arbor with #1 Morse Taper Shank
- —Requires use of a 1/4″-20 draw bar. 750) , designed to expand up to. Mounting shank is # 1 morse taper with a 1/4-20 internal thread for draw bars. 010 inches working length is 2-5/8 inches. Expanding machinable mandrel / arbor. Made from 12l14 soft machinable steel. Working diameter is 3/4 (.
Michigan Drill 200 Series High-Speed Steel General Purpose Drill Bit, 1 Morse Taper Shank, Spiral Flute, 118 Degrees Conventional Point, 5/32″ Size (Pack of 1)
- 118 degrees conventional point. 5/32-inches size. Morse taper shank allows the tool to be inserted directly into the machine’s spindle to facilitate high-torque applications such as large cut diameters. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
Taytools 465517 Pen Turning Lathe Mandrel Morse Taper MT1 Quick Adjust, Handles Blanks Up to 5 Inches, Overall Length 9 Inches
- Features a true fitting #1 morse taper, which promotes a secure fit to the headstock of the lathe. Simple slide the brass compression fitting where you want it and tighten inset your blank and tighten the brass knurled nut on the threaded end with finger pressure. Mandrel is 245″ in diameter and will handle blanks up to 5″ in length overall length is 9″. The big advantage of this pen mandrel is its ability to easily adjust to different blank sizes. The threaded end works with a live center.
2″ Diameter Face Plate with #1 Morse Taper Shank
- Features a true fitting #1 morse taper, which promotes a secure fit to the headstock of the lathe. Mandrel is 245″ in diameter and will handle blanks up to 5″ in length overall length is 9″. The big advantage of this pen mandrel is its ability to easily adjust to different blank sizes. Simple slide the brass compression fitting where you want it and tighten inset your blank and tighten the brass knurled nut on the threaded end with finger pressure. The threaded end works with a live center.
Michigan Drill 200 Series High-Speed Steel General Purpose Drill Bit, 1 Morse Taper Shank, Spiral Flute, 118 Degrees Conventional Point, 9/64″ Size (Pack of 1)
- Morse taper shank allows the tool to be inserted directly into the machine’s spindle to facilitate high-torque applications such as large cut diameters. 9/64-inches size. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. 118 degrees conventional point. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
Michigan Drill 200 Series High-Speed Steel General Purpose Drill Bit, 1 Morse Taper Shank, Spiral Flute, 118 Degrees Conventional Point, 19/64″ Size (Pack of 1)
- 118 degrees conventional point. 19/64-inches size. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Morse taper shank allows the tool to be inserted directly into the machine’s spindle to facilitate high-torque applications such as large cut diameters. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
KISENG 2pcs 1:20 MT1 No.1 Round Shank Morse Taper Reamer Set
- 8” quantity 2pcs feature made by alloy steel, fine processing, high wear resistance, durable. Please allow 1-3cm error due to manual measurement. 9” x 0. 4” box 9. 8 x 2 x 2cm/3. The color may have different as the difference display,pls understand. No. 5 x 1cm/3. 1 morse taper reamers to ream the morse tapered shape. 2. Notice 1. Pls make sure you do not mind before you bid. 7cm/0. Package included 2pcs x morse taper reamers. Specification material alloy steel color brown dimension 120 size morse taper reamer 9.
7/8″ Expanding Mandrel/Arbor with #1 Morse Taper Shank
- Working diameter is 7/8″ (. Mounting shank is # 1 morse taper with a 1/4-20 internal thread for draw bars. –Requires use of a 1/4″-20 draw bar. Expanding machinable mandrel / arbor. Made from 12l14 soft machinable steel. 875) , designed to expand up to. 010 inches working length is 2-5/8 inches.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
