Best and Coolest 22 Drum Sanders in 2019

 

3 inch X 70 FT 40 Grit Zirconia Woodworking Drum Sander Roll

3 inch X 70 FT 40 Grit Zirconia Woodworking Drum Sander Roll

3 inch X 70 FT 40 Grit Zirconia Woodworking Drum Sander Roll - Save big by cutting your own drum sanding strips with our continous rolls just use an old strip as a template and cut to length. Our 3″ wide drum sander roll fits jet performax 10-20 (13 wraps/roll), 22-44 (6 wraps/roll), 25-2 (6 wraps/roll), 16-32 (9 wraps/roll), woodtek 25-2 (6 wraps/roll), ryobi wds1600 (9 wraps/roll) and any drum sander that requires 3″ wide strips. Tough cloth backed y wgt material provides a long lasting cut. We are the manufacturer factory direct and precision cut in usa by red label abrasives guaranteed or money back. Use zirconia alumina material for drum sanding and planing of hard woods zirconia will outlast any standard sanding strip when used on hard woods.

 

Shop Fox D2677 Drum Sander Set

Shop Fox D2677 Drum Sander Set

Shop Fox D2677 Drum Sander Set - Drum sander set, this drum sander set includes three rubber sanding drums 4-1/4 inches in length to accommodate 1 inch, 1-1/2 inch and 2 inch diameter sanding sleeves. This kit also includes one 80-grit sleeve for each drum to get things started. (note drum diameter sizes indicate od of compatible sanding sleeves, not diameter of rubber drums).

 

2 inch X 60 FT 120 Grit Woodworking Drum Sander Roll

2 inch X 60 FT 120 Grit Woodworking Drum Sander Roll

2 inch X 60 FT 120 Grit Woodworking Drum Sander Roll - Tough cloth backed x wgt material provides a long lasting cut. Save big by cutting your own drum sanding strips with our continous rolls just use an old strip as a template and cut to length. Our 2″ wide drum sander roll fits delta 18-36 (5 wraps/roll) and any drum sander that required 2″ wide strips. Premium aluminum oxide open grain resists heat and buildup. We are the manufacturer factory direct and precision cut in usa by red label abrasives guaranteed or money back.

 

Jet 723520K JWDS-1632 16-32 Plus 20 Amp Service with 608003 Stand in Woodworking Sanders Drum Sanders

Jet 723520K JWDS-1632 16-32 Plus 20 Amp Service with 608003 Stand in Woodworking, Sanders, Drum Sanders

Jet 723520K JWDS-1632 16-32 Plus 20 Amp Service with 608003 Stand in Woodworking, Sanders, Drum Sanders - Precision-machined and dynamically balanced extruded aluminum drum is designed to dissipate heat and protect the work surface from heat-damage. Sandsmart control continuously monitors the load on the drum motor and automatically regulates the speed of the conveyor motor to maintain the highest feed rate without overload. Conveyor bed parallelism is easily adjusted by turning the dial on the outside of the bed, no tools required. Parallelism adjust dial features a stop to quickly return the conveyor bed to a flat position. Dust hood includes an integrated channel that mirrors the shape of the drum and directs chips and dust to the 4 collection port”.

 

2 inch X 60 FT 80 Grit Zirconia Woodworking Drum Sander Roll

2 inch X 60 FT 80 Grit Zirconia Woodworking Drum Sander Roll

2 inch X 60 FT 80 Grit Zirconia Woodworking Drum Sander Roll - We are the manufacturer factory direct and precision cut in usa by red label abrasives guaranteed or money back. Our 2″ wide drum sander roll fits delta 18-36 (5 wraps/roll) and any drum sander that required 2″ wide strips. Use zirconia alumina material for drum sanding and planing of hard woods zirconia will outlast any standard sanding strip when used on hard woods. Save big by cutting your own drum sanding strips with our continous rolls just use an old strip as a template and cut to length. Tough cloth backed y wgt material provides a long lasting cut.

 

2 inch X 60 FT 120 Grit Zirconia Woodworking Drum Sander Roll

2 inch X 60 FT 120 Grit Zirconia Woodworking Drum Sander Roll

2 inch X 60 FT 120 Grit Zirconia Woodworking Drum Sander Roll - Tough cloth backed y wgt material provides a long lasting cut. Save big by cutting your own drum sanding strips with our continous rolls just use an old strip as a template and cut to length. Our 2″ wide drum sander roll fits delta 18-36 (5 wraps/roll) and any drum sander that required 2″ wide strips. Use zirconia alumina material for drum sanding and planing of hard woods zirconia will outlast any standard sanding strip when used on hard woods. We are the manufacturer factory direct and precision cut in usa by red label abrasives guaranteed or money back.

 

3 inch X 70 FT 220 Grit Woodworking Drum Sander Roll

3 inch X 70 FT 220 Grit Woodworking Drum Sander Roll

3 inch X 70 FT 220 Grit Woodworking Drum Sander Roll - Save big by cutting your own drum sanding strips with our continous rolls just use an old strip as a template and cut to length. Our 3″ wide drum sander roll fits jet performax 10-20 (13 wraps/roll), 22-44 (6 wraps/roll), 25-2 (6 wraps/roll), 16-32 (9 wraps/roll), woodtek 25-2 (6 wraps/roll), ryobi wds1600 (9 wraps/roll) and any drum sander that requires 3″ wide strips. We are the manufacturer factory direct and precision cut in usa by red label abrasives guaranteed or money back. Tough cloth backed x wgt material provides a long lasting cut. Premium aluminum oxide open grain resists heat and buildup.

 

Jet Performax 60-2150 Ready to Wrap Abrasive Strips for Jet Performax 22-44 Drum Sander 150 Grit3 wraps in a box

Jet Performax 60-2150 Ready to Wrap Abrasive Strips for Jet & Performax 22-44 Drum Sander 150 Grit(3 wraps in a box)

Jet Performax 60-2150 Ready to Wrap Abrasive Strips for Jet & Performax 22-44 Drum Sander 150 Grit(3 wraps in a box) - Heavy-duty x weight cloth backing. Antistatic backing for easier dust pickup. 3 wraps in a box. Open coat for non-loading. Aluminum oxide.

 

Shop Fox D4595 Hand-Held Pneumatic Drum Sander 7-12 x 2-14

Shop Fox D4595 Hand-Held Pneumatic Drum Sander, 7-1/2″ x 2-1/4″

Shop Fox D4595 Hand-Held Pneumatic Drum Sander, 7-1/2″ x 2-1/4″ - . This rolling-pin style pneumatic drum sander is perfect for hand contouring and smoothing projects that are too large to use with a stationary sander. Simply chuck the 3/8″ spindle into a portable electric, cordless or air powered drill for two-handed control.

 

SuperMax 19-38 Drum Sander

SuperMax 19-38 Drum Sander

SuperMax 19-38 Drum Sander - The conveyor table is 22″ wide to add support to the workpiece. When sanding stock wider than 19″, the index level will properly adjust the conveyor for flawless wide sanding. It also features an extra-wide conveyer which properly supports stock over 19″ wide. Additionally, the supermax 19-38 drum sander features intellisand technology which automatically adjusts conveyor speed based on load and prevents gouging, damaging, or burning stock. There are easy height adjustments a thrust bearing below the handle and a nut positioned above prevents the drum from moving out of the set position while sanding and there’s no backlash or slop in the height adjustment mechanism allowing for easier and smoother height adjustments. The 19-38 drum sander comes standard on supermax’s open stand, and the drum is pre-wrapped with 80 grit sandpaper. It features simple alignment just one nut will adjust the conveyor to parallel the sanding head making aligning the conveyor to the sanding head quickly and easily as well as indexed alignment settings. They have addressed issues common with other drum sanders on the market to create one of the best you can find. These drum sanders also have a flatness guarantee the precision-flattened steel conveyor bed is reinforced with four steel cross sections for no flex, guaranteeing flatness to less than. Its patented abrasive attachment system effectively tensions the abrasive wraps preventing abrasive end overlap, and the 19-38 has easy access to abrasive fastening unlike other drum sanders along with an extra wide space to access fasteners to eliminate the need for special tools. . 010″ across the width of the sander. The 19-38 has an indexed alignment setting for narrow and wide stock. Take your sanding to the next level with a supermax sander. Intellisand also provides a consistent finish even with varying grain patterns and densities.

 

Purture 88 Pcs Drum Sanders Set Including 80 Pcs Sanding Bands and 8 Pcs Drum Mandrels

Purture 88 Pcs Drum Sanders Set Including 80 Pcs Sanding Bands and 8 Pcs Drum Mandrels

Purture 88 Pcs Drum Sanders Set Including 80 Pcs Sanding Bands and 8 Pcs Drum Mandrels - 120 grit and 80 grift can be used to shape fine woodcraft designs, smoothing inside and outside curved edges. Attention always make sure to tighten screw for non-slip fit before using. Easy to install and use, common and standard size fit for most rotary tools. Perfect accessory to sand, shaped, groove, fit for soft and hardwoods, fiberglass ect. 80 pcs sanding bands with 8 drum mandrels.

 

6 inch X 50 FT 80 Grit Zirconia Woodworking Drum Sander Roll

6 inch X 50 FT 80 Grit Zirconia Woodworking Drum Sander Roll

6 inch X 50 FT 80 Grit Zirconia Woodworking Drum Sander Roll - Our 6″ wide drum sander roll fits woodtek 37″ (4 wraps/roll) and any drum sander that requires 6″ widestrips. Use zirconia alumina material for drum sanding and planing of hard woods zirconia will outlast any standard sanding strip when used on hard woods. We are the manufacturer factory direct and precision cut in usa by red label abrasives guaranteed or money back. Save big by cutting your own drum sanding strips with our continous rolls just use an old strip as a template and cut to length. Tough cloth backed y wgt material provides a long lasting cut.

 

JET 628900 Mini 10-Inch 1-Horsepower Benchtop Drum Sander 115-Volt 1-Phase

JET 628900 Mini 10-Inch 1-Horsepower Benchtop Drum Sander, 115-Volt 1-Phase

JET 628900 Mini 10-Inch 1-Horsepower Benchtop Drum Sander, 115-Volt 1-Phase - Large hand wheel for easy adjustment. 4-inch dust port for easy collection. Quick paper change for less downtime and more productivity. 20 inches wide capacity for sanding larger surfaces. 1 hp motor for fast stock removal.

 

JET 629004K 16-32 Plus 16-Inch 1-12-Horsepower Open Stand Drum Sander 110-Volt 1 Phase

JET 629004K 16-32 Plus 16-Inch 1-1/2-Horsepower Open Stand Drum Sander, 110-Volt 1 Phase

JET 629004K 16-32 Plus 16-Inch 1-1/2-Horsepower Open Stand Drum Sander, 110-Volt 1 Phase - The drum is specifically designed to run smoothly and dissipate heat. For added protection, a safety keyed on/off switch with overload protection controls the sanding drum and is front-mounted for operating convenience. Measuring 16 inches in length with a five-inch diameter, this precision-machined and balanced extruded aluminum drum is self-cooling to help prevent heat-related damage of the wood or sanding strip under load. Independent tracking adjusters on either side of the conveyor are easily accessible and simple to use should tracking adjustments become necessary–as when a new conveyor belt may need slight tracking or tensioning adjustments after it breaks in. At the same time, the generous, stable conveyor platform makes turning material very accurate while smoothing the surface at the same time. Dust port for efficient dust collectionto help maintain healthy air quality in your shop, and to make sure your vision isn’t obscured by dust, the hinged top cover has a four-inch diameter dust port molded into the upper shroud to help evacuate most of the dust created as you work. What’s in the boxdrum sander, 80-grit abrasive strip, 100-grit abrasive belt, tuftool, metal stand with shelf, and one box of ready-to-wrap abrasives. This innovative tool elevates the primary woodworking tasks of sanding from long and slow to short and fast. This clever invention makes for quick and easy paper changes, saving you time and stress. The 16-32 plus weighs 145 pounds and is backed by a five-year warranty. Dual motors for power and controlthe 16-32 plus comes equipped with two high quality motors a 1-1/2 hp, (rated using continuous duty cycle) 1 phase, 110-volt, 14 amp motor that spins the sanding drum at a consistent 1725 rpm, and a direct drive 43 in. View larger. Precision drum for long, smooth operating lifeat the heart of the 16-32 plus is the sanding drum, which is specifically designed for smooth running and the dissipation of heat. About jet a history of sharing new, feature-rich productsopened in 1958 after the founder of the company, leslie p. Nodecoration {text-decoration none}the jet 16-32 plus 16-inchopen stand drum sander offerstwo powerful, tefc motorspatented conveyor belt “trackers” that eliminate the need for manual belt adjustmentsan open frame design for sanding pieces up to 32 inches wide with two passesa safety keyed on/off switch with overload protection controlseasy-to-use adjusters make compensating for belt stretch simple, fast, and tool-free. The ability to safely sand wood from 3 inches thick to 1/32 inch ensures versatility. A large crank changes the height of the sanding drum and ensure precision cut depth changes are easy to make. It can sand materials as thick as three inches, as thin as 1/32 inch, and anywhere in-between. Callout3-c26 {height 100 percentbackground url(‘https//images-na. Ssl-images-amazon. Additionally, a camber adjustment makes it easy to prevent “witness marks” when making two passes on wide boards. /Lbs. Png’) repeat-yborder-left 0px solid #999999border-right 1px solid #999999padding 10pxwidth 250px}ul. And an infinitely variable-speed control on the conveyor belt produces the ultimate finish at a rate from zero to 10 feet per minute. Cut your sanding time up to 75 percent with the jet 629004k 16-32 plus 16-inch 1-1/2 hp open stand drum sander, 110-volt 1 phase. For added peace of mind, the sanding drum turns on sealed and permanently lubricated one-inch-diameter ball bearings for a long, smooth operating life. Com/images/g/01/th/content_26/q1_2009/c26-callout3. Both are tefc (totally enclosed fan cooled) motors designed to operate in a potentially dusty environment. Sussman, took the first boeing jet airplane trip from seattle, washington to japan, jet began as a small dealer that sold air hoists and trolleys out of a single hardware store in seattle. Infinitely variable feed rate for flexibilitythe infinitely variable feed rate and the wide range of sanding grits available combine to handle fast rough work or fine sanding on any species of wood. Additionally, the drum height and downward roller pressure are both user adjustable to virtually eliminate snipe. A reliable no-give power feed belt provides a consistent, smooth sanding action to provide the finest results. Patented trackers for quick and easy adjustmentsjet’s patented conveyor belt “trackers” eliminate the need for manual belt adjustments, ensuring precise results. A large, four-inch dust port helps keep your shop clean. Unlike planers–which often have a minimum length requirement of a foot or more–the 16-32 plus can safely handle pieces as short as 2-1/4 inches. Connect to an efficient dust collector like the jet dc1100 for best results. Today, you’ll find that jet offers a wide range of popular woodworking tools that are backed with best-in-class features and excellent service. 5em}h5. Over the years, jet has carried everything from snowmobiles, transmitter radios, and forklifts to nylon stockings, but by the early 1970s, metalworking had become the base of their business line. Reinforced steel conveyor bed and no-give power feed for consistencya precision-flattened reinforced steel conveyor bed holds the stock flat during sanding. Callout {font-family verdana, helvetica, arial, serifmargin 10pxwidth 250}td. Ideal for small commercial shops, this tool can be used in lieu of a planer, and it provides ample capacity to handle both small and large jobs with ease. Callout {text-align center}img. Withlink {border1px black solid}a. Twin motors provide the sanding power you need. And by the 1980s, jet had expanded into the realm of woodworking. The open frame design also lets you sand pieces measuring up to 32 inches wide by making two passes. Handles a wide range of material sizesthe 16-32 plus handles a wide range of material sizes quickly and easily. Caption {font-family verdana, helvetica neue, arial, seriffont-size 10pxfont-weight boldfont-style italic}ul. Performax spring clip for quick changesthe 16-32 plus also includes a special spring clip invented by performax that holds the end of the sandpaper roll. Indent {list-style inside disctext-indent 20px}table. Torque motor that drives the conveyor belt separately. Callout {list-style inside disctext-indent -12pxfont-size 12pxline-height 1.

 

6 inch X 50 FT 100 Grit Woodworking Drum Sander Roll

6 inch X 50 FT 100 Grit Woodworking Drum Sander Roll

6 inch X 50 FT 100 Grit Woodworking Drum Sander Roll - Premium aluminum oxide open grain resists heat and buildup. Our 6″ wide drum sander roll fits woodtek 37″ (4 wraps/roll) and any drum sander that requires 6″ widestrips. Tough cloth backed x wgt material provides a long lasting cut. Save big by cutting your own drum sanding strips with our continous rolls just use an old strip as a template and cut to length. We are the manufacturer factory direct and precision cut in usa by red label abrasives guaranteed or money back.

 

3 inch X 70 FT 120 Grit Zirconia Woodworking Drum Sander Roll

3 inch X 70 FT 120 Grit Zirconia Woodworking Drum Sander Roll

3 inch X 70 FT 120 Grit Zirconia Woodworking Drum Sander Roll - Tough cloth backed y wgt material provides a long lasting cut. Use zirconia alumina material for drum sanding and planing of hard woods zirconia will outlast any standard sanding strip when used on hard woods. Our 3″ wide drum sander roll fits jet performax 10-20 (13 wraps/roll), 22-44 (6 wraps/roll), 25-2 (6 wraps/roll), 16-32 (9 wraps/roll), woodtek 25-2 (6 wraps/roll), ryobi wds1600 (9 wraps/roll) and any drum sander that requires 3″ wide strips. Save big by cutting your own drum sanding strips with our continous rolls just use an old strip as a template and cut to length. We are the manufacturer factory direct and precision cut in usa by red label abrasives guaranteed or money back.

 

SHOP FOX W1740 12-Inch Drum Sander

SHOP FOX W1740 12-Inch Drum Sander

SHOP FOX W1740 12-Inch Drum Sander - Rubber in feed drum. Micro-adjustable graphite/felt platen. Rubber pressure drums. Steel out feed drum. Safety shut-off bar.

 

Delta 31-814 Conveyor Belt for 31-250 Drum Sander

Delta 31-814 Conveyor Belt for 31-250 Drum Sander

Delta 31-814 Conveyor Belt for 31-250 Drum Sander - 1-inch diameter, 1-1/2-inch diameter. 2-inch long. 1/4-inch shank. Medium grit sleeves. 1/2-inch diameter, 3/4-inch diameter.

 

3 inch X 70 FT 120 Grit Woodworking Drum Sander Roll

3 inch X 70 FT 120 Grit Woodworking Drum Sander Roll

3 inch X 70 FT 120 Grit Woodworking Drum Sander Roll - Save big by cutting your own drum sanding strips with our continous rolls just use an old strip as a template and cut to length. Premium aluminum oxide open grain resists heat and buildup. Tough cloth backed x wgt material provides a long lasting cut. Our 3″ wide drum sander roll fits jet performax 10-20 (13 wraps/roll), 22-44 (6 wraps/roll), 25-2 (6 wraps/roll), 16-32 (9 wraps/roll), woodtek 25-2 (6 wraps/roll), ryobi wds1600 (9 wraps/roll) and any drum sander that requires 3″ wide strips. We are the manufacturer factory direct and precision cut in usa by red label abrasives guaranteed or money back.

 

A&H Abrasives 159909 Drum Sander Wraps Aluminum Oxide y-weight 80 Grit Readywrap Fits Delta 31-481 3 Each

A&H Abrasives 159909, Drum Sander Wraps, Aluminum Oxide, (y-weight), 80 Grit Readywrap Fits Delta 31-481, 3 Each

A&H Abrasives 159909, Drum Sander Wraps, Aluminum Oxide, (y-weight), 80 Grit Readywrap Fits Delta 31-481, 3 Each - No measuring or cutting required fits steel city® 26″ and delta® 31-481 machines premium aluminum oxide grain delivers sharp and durable performance. Resin bond anchors the abrasive to the backing for longer belt life. Y-weight poly-cotton cloth backing is tear resistant and dissipates heat for cooler sanding. . The best abrasive belts for general woodworking. The best belts for general woodworking. Made in wyoming, usa with components from korea and usa. A&h abrasivesâ„¢ heavy duty, resin bonded, open coat cloth strip abrasive rolls are pre-cut and ready to wrap.

 

JET 60-2220 Ready to Wrap Abrasive Strips for Performax 22-44 Plus Drum Sander 220 Grit 3 wraps in a box

JET 60-2220 Ready to Wrap Abrasive Strips for Performax 22-44 Plus Drum Sander 220 Grit 3 wraps in a box

JET 60-2220 Ready to Wrap Abrasive Strips for Performax 22-44 Plus Drum Sander 220 Grit 3 wraps in a box - Open coat for non-loading. Aluminum oxide. Antistatic backing for easier dust pickup. Heavy-duty x weight cloth backing.

 

JET 98-1601 10-Inch x 16-Inch InfeedOut Sanding Support Tables for 16-32 Drum Sander

JET 98-1601 10-Inch x 16-Inch Infeed/Out Sanding Support Tables for 16-32 Drum Sander

JET 98-1601 10-Inch x 16-Inch Infeed/Out Sanding Support Tables for 16-32 Drum Sander - Easy to use. Contains 1/4-inch arbor. Adds length to the feed table to handle longer boards. For use on wood, metal, painted surfaces and fiberglass. Gator grit 2″ x 1-1/2″ drum sander kit rubber mandrel with 1/4″ arbor. The product is manufactured in china.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.